• Design & Manufacturing
• /
• v.11 no.1
• /
• pp.45-49
• /
• 2017

Currently, a lot of efforts to make increases the manufacturing efficiency have tried and there is growing the interest to implementing the machining operation through CAM automation and optimization. This kind of movement has shown gradually in 5X milling as well as 3X milling task. By the way, in case of 5X milling, it is difficult to hire the CAM experts who is an experience for 5X machining and also it has too big trouble to use them due to high cost. For this reason, you can see the manufacturer who is concern the CAM S/W to provide the NC automation program that beginners can generate easily the 5X milling in short term and the existing 5X milling process can be improved. These requirements need to make a NC automation process including the practical machining strategies same as the generation by NC expert. In order to support this, it is necessary to directly apply the 3D machining part based on NC template which includes the machining procedures, standard cutter library, auto machine area selection, analyze tool for part shape, machining condition setting considering the material stiffness to be provided by CimatronE and it should be created the 5axis machining data by a minimized operation. With user-friendly, CimatronE's NC machining automation tools improve the 5-axis machining process and speed up the process, maximizing work efficiency and improving product productivity compared to existing machining tasks.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.19-26
• /
• 1997

The manufacture of an impeller typically requires the 5-axis CNC machining, since the impeller is usually under working conditions such as high speed, high temperature, and high pressure. Thus, this study contributes to development of an exclusive CAM system for effective 5-axis CNC machining of a ruled surface type impeller. In this study, the sampled impeller is made of blades and a body and the blade consists of ruled surfaces between hub curve and shroud curve. In the post processing for 5-axis NC part program, the cutter axis direction vector is the straighten vector on ruled surface. The position of ball center in ball end mill cutter is decided on the interference check between the cutter and body surface of impeller using with the modified z-map method that z-axis is the same of cutter axis direction vector. The exclusive CAM system for an impeller developed in this study was very effective for designs and 50-axis machining of a ruled surface type impeller.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.9-15
• /
• 2011

In order to develop a practical postprocessor for 5-axis machining, the general equations of numerically controlled (NC) data for 5-axis configurations with not only non-orthogonal rotary axes but also orthogonal rotary axes were exactly expressed by the inverse kinematics, and a Windows-based postprocessor written in Visual Basic was developed according to the proposed algorithm. The developed postprocessor is a general system that suitable for all kinds of 5-axis machine tool with orthogonal and non-orthogonal rotary axes. Through implementation of the developed postprocessor and verification by a cutting simulation and machining experiment, the effectiveness of the proposed algorithm is confirmed. Compatibility is improved by allowing exchange of data formats such as rotational tool center position (RTCP) controlled NC data, vector post NC data, and program object file (POF) cutter location (CL)data, and convenience is increased by adding the function of work-piece origin offset. Consequently, the technology of practical post-processor for 5-axis machining is developed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.95-100
• /
• 1993

본 연구에서는 볼 엔드밀을 사용한 5축 가공에서 공구 간섭회피를 위한 효율적인 알고리즘과 가공 가능한 많은 자세들 중에서 공구 절삭부위와 이전자세를 고려한 공구 자세설정 알고리즘을 개발 하였다. 공구 간섭검사는 공구 밑면 간섭과 몸체 간섭으로 나누어 순차적으로 수행하고, 공구 몸채 간섭이 없는 공구 자세를 설정한다. 공구 몸체 간섭검사는 곡면의 다각형 모델과 공구 축과의 관계를 사용하여 행한다. 간섭이 발생하였을 경우 간섭회피 및 자세조정 영역으로 설정하고 유효한 공구자세의 범위를 정한 후, 이 범위 내에서 공구 절삭 부위 및 이전 자세를 고려한 효율적 공구자세를 사용하여 공구경로를 산출하였으며, 시뮬레이터를 통해 그 유효성을 검증하였다.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2007

In this paper, we present a machining time estimation algorithm for 5-axis high-speed machining. Estimation of machining time plays an important role in process planning and production scheduling of a shop. In contrast to the rapid evolution of machine tools and controllers, machining time calculation is still based on simple algorithms of tool path length divided by input feedrates of NC data, with some additional factors from experience. We propose an algorithm based on 5-axis machine behavior in order to predict machining time more exactly. For this purpose, we first investigated the operational characteristics of 5-axis machines. Then, we defined some dominant factors, including feed angle that is an independent variable for machining speed. With these factors, we have developed a machining time calculation algorithm that has a good accuracy not only in 3-axis machining, but also in 5-axis high-speed machining.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.4
• /
• pp.347-358
• /
• 2000

The view dependency of typical spatial-partitioning based NC simulation methods is overcome by polygon rendering technique that generates polygons to represent the workpiece, thus enabling dynamic viewing transformations without reconstruction of the entire data structure. However, the polygon rendering technique still has difficulty in realizing real-time simulation due to unsatisfactory performance of current graphics devices. Therefore, it is necessary to develop a mesh decimation method that enables rapid rendering without loss of display quality. In this paper. we proposed a new mesh decimation algorithm thor a workpiece whose shape varies dynamically. In this algorithm, the 2-map data thor a given workpiece is divided into several regions, and a triangular mesh is constructed for each region first. Then, if any region it cut by the tool, its mesh is regenerated and decimated again. Since the range of mesh decimation is confined to a few regions, the reduced polygons for rendering can be obtained rapidly. Our method enables the polygon-rendering based NC simulation to be applied to the computers equipped with a wider range of graphics cards.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.2
• /
• pp.153-161
• /
• 2008

This paper proposes an efficient algorithm for deriving inverse kinematics equation of 5-axis machine. Because the joint order and direction of 5-axis machine are different for each type of machine, each type of machine needs its own inverse kinematics equation for post-processing of NC data. Also derived inverse kinematics equation may cause problems of indeterminate and inconsistent solution. In order to resolve these problems, we have developed a generic method to derive direct kinematics equation by considering orthogonal joints of 5-axis machines. Using this method, we also have proposed a general algorithm for deriving inverse kinematics equation for various types of 5-axis machines.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.1
• /
• pp.67-84
• /
• 1995

Five-axis NC machining is advanced machining technology by which highly geometrically complicated parts can be machined accurately with high machinability. In this paper, we investigate the problems of determining the machinability and part setup orientation for a given surface models. We first develop kinematic model of the five-axis machines based on the axis configuration, then develop algorithms for determining the feasibility of machining by one setup(machinability) and the part orientation for the C,A and A,B type configuration. The machinability is determined by computationally efficient procedure for finding the intersection between the feasible area on the sphere and the numerical map called binary spherical map(BSM), and the part setup is chosen such that the rotational range is minimized among the feasible configurations. The developed algorithms are tested by numerical simulations, convincing they can be readily implemented on the CAD/CAM system as an automated process planner giving the efficient machine type and setup for NC machining.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.245-246
• /
• 2006

For developing 5-axis laser cutting systems, many problems such as rotating of laser head or table, 5-axis tool path generation and collision avoidance between laser head and product should be solved. In this paper, a five-axis laser cutting machine with table swivel and rotary type configuration is developed. The five axes (X,Y,Z,A,B) are controlled and interfaced to PC via MMC board. Two kinds of CAM S/W such as commercial 5-axis CAM S/W(Euclid) and UG-API are engaged to generate NC code for the developed 5-axis laser cutting machine.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1917-1924
• /
• 2003

This paper proposes a roughing path generation method fer machining impeller with 5-axis machining center. Traditional researches are focus on finishing for machining impeller. To achieve efficient machining, roughing method must be studied. The proposed method consists two steps : One is to select optimal tool size and tool attitude by dividing cutting area into two regions to reduce cutting time. The regions are automatically divided by character point on the geometry of impeller blade. After dividing, the tool of the optimal size is selected for each divided region. The other is avoidance of tool interference. Tool interference in cutting areas is avoided by checking the distance between tool axis vector and ruling line on blade surface or approximated plan between ruling line. Using this method, the cutting time is reduced efficiently.