• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.117-124
• /
• 2018

Recently, the interest and consumption of mini watermelon (Citrullus lunatus Thunb.) are increasing due to nuclear family and one person household. However, there's no research for mini watermelon. Therefore, the purpose of the study is to develop standard cultivation method of mini watermelon. The test cultivar is 'Minimi', which is a small-sized fruit, the rootstock is 'Bullojangsaeng', which is a cucurbit line. Grafted plants were transplanted on April 5, 2017, and harvested in early July. Cultivated types were 3 methods, which are ${\cap}-form$, arched, and runner type, and plant spacing were 40, 60, and 80 cm, respectively. The rowth and yield in ${\cap}-form$ was higher than that of the arched and runner types, and the sugar content was higher a bit. The yield per unit area was about 50% higher than ${\cap}-form$, which can be plant density cultivation than that of the runner type. The number of seeds per fruit of 'Minimi' was similar to that of 'Sambokggul', but seed weight was one third lower than that of 'Sambokggul'. The content of lycopene was 30% higher than that of 'Sambokggul' watermelon, and the main sugar content is similar to or slightly less. In conclusion, the ${\cap}-form$ staking cultivation was superior to the runner type or arched cultivation in terms of fruit setting ratio, yield and quality.

• Journal of Animal Science and Technology
• /
• v.60 no.4
• /
• pp.9.1-9.11
• /
• 2018

Background: In recent years, with the prohibition of antibiotics used as growth stimulants in the nutrition of farm animals, researchers have searched for alternative natural and reliable products in order to be able to sustain the developments experienced during the use of antibiotics and to overcome the possible inconveniences. In this context, studies on evaluation of essential oils in poultry nutrition have been reported to improve the utilization of feed, stimulate the release of digestive enzymes, increase absorption in the stomach and intestines, antimicrobial and anti-parasitic effects and thus, can be an alternative to antibiotics and improve meat quality as well. Indeed, this study has been carried out to explore the effects of the addition of 150 mg/kg capsicum oleoresin (CAP), carvacrol (CAR), cinnamaldehyde (CIN) or their mixture (CAP+CAR+CIN) into the broilers' ration over sensory, physical and chemical properties in breast meat and leg meat. Methods: Experiments were conducted over 400 male and female broiler chicks (Ross-308) in 5 groups (1 control group and 4 treatment groups), each composed of 80 chicks. The control group was fed without feed additives while the second, third, fourth and the fifth groups were fed with 150 mg CAP/kg feed, 150 mg CAR/kg feed, 150 mg CIN/kg feed, and 150 mg CAP+CAR+CIN/kg feed, respectively. Results: Addition of CAP, CAR, CIN or CAP+CAR+CIN had effects on the sensory (of taste, tenderness, juiciness and overall acceptability); physical properties (of $L^*$ value and toughness), the chemical properties (of DM, CF, CP, linoleic, EPA, behenic, MUFA, PUFA and ${\Sigma}n-6$ of the leg meat), the physical characteristics (of toughness and firmness), and the chemical properties (of CF, CP, linoleic, ecosenic, EPA, lignoseric, MUFA and ${\Sigma}n-3$) of the breast meat in comparison to control group. Furthermore, while the treatments had positive impacts on thawing loss, cooking loss and water holding capacity in both breast and leg meat; no effect was observed on pH value and lipid oxidation on day 1, day 4 and day 8. Conclusion: The results strongly suggested that the addition of CAP, CAR, CIN or CAP+CAR+CIN to the rations of the broiler chicks changed the sensory, physical and chemical properties of breast and leg meat. It was also observed that these compounds were more effective when they were added to the ratio as a mixture rather than adding them individually.

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.729-742
• /
• 2012

Recently, to using chemical coagulation process for T-P removal in STP effluent as tertiary treatment process is generalized in the country. The importance of analysis technique to save the treatment & maintenance cost during coagulation process is becoming more increased each day. Thus, it is necessary for the analysis technique during coagulation process to be presented well the characteristic of coagulation in field apply. There are a few analysis techniques such as Jar Test, zeta potential analysis and streaming current detecting techniques. But there are difficult to apply in field immediately due to long test time and difficult analysis techniques. And using PDA technique, it is reviewed applicability of the techniques as field index on pilot plant of P-CAP system The P-CAP system is composed of an in-line static mixer, a Flocculation Tank and the CAP reactor with 2 stage weir for effluent. Pre-test is performed to fix the mixing velocity in the Flocculation Tank using the PDA equipment and it fixed with 30RPM. Also, Jar Test is performed to select optimum dose of each coagulant for each T-P concentration level of influent. Result of continuous test on pilot plant of P-CAP system, the FSI in the Flocculation Tank is increased consistently by increasing each dosing concentration of coagulant such as LAS and PAC in the low level influent T-P concentration comparatively. It is considered that formed Al-hydroxide complexes for dosed coagulant are caused FSI variation. Furthermore, it seems that FSI value in the high level influent T-P concentration appeared lower than the opposite influent condition relatively because it is formed simultaneously Al-hydroxide complexes as solid type and Al-phosphorus complexes as soluble type. Thus, relation of FSI by PDA technique and T-P removal of final effluent on pilot plant of P-CAP system are very limited for the kind of coagulant and the characteristics of influent. And it though that FSI value by PDA technique with analyzing of turbidity in Flocculation Tank will be used restrictedly on field as the relative field-index.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.10a
• /
• pp.175-176
• /
• 2000

PtdIns(4)P와 PtdIns(4,5)P$_2$등과 같은 폴리포스이노시타이드(Polyphosph-oinositide)는 여러 가지 호르몬 및 성장인자들에 의한 세포의 신호전달기작에 있어서 중요한 역할을 한다. 이들은 세포내 여러효소 및 단백질의 활성을 조절하기도 하고, cofilin(1), destrin(2), $\alpha$-actinin(3), gCap39(4) 및 CapZ등과 같은 여러 actin binding protein들의 성질을 변화시키기도 한다. (중략)

• Steel and Composite Structures
• /
• v.23 no.5
• /
• pp.493-499
• /
• 2017

The behaviour of steel frames is highly influenced by the beam-column connections. Traditionally, Steel frames were usually designed assuming that connections are ideally pinned or fully rigid. A semi-rigid connection, however, creates a balance between the two extreme approaches mentioned above. In this research, two full scales of Extended End Plate Connections (EEPCs) were tested. Mathematical and numerical models were used to analyse the connections, and close correlations were found between these models and the corresponding tested specimens, which confirmed the confidence in the experimental results. The experimental results obtained enrich the available test data about behaviour of EEPC. In addition, the purpose of studying EEPC experimentally is to compare the stiffness and moment-rotation curve of EEPCs with that of Cap Plate Connections (CPCs), which were tested in a previous work. CPCs have not been studied sufficiently in the literature. The results obtained show that the typical CPC reduces the connection stiffness and these results will make a valuable contribution to the available test data in the research area of CPC.

• Journal of the Korean Mathematical Society
• /
• v.52 no.5
• /
• pp.991-1001
• /
• 2015

In this work we obtain conditions for nonspecial line bundles on general ${\kappa}$-gonal curves failing to be normally generated. Let L be a nonspecial very ample line bundle on a general ${\kappa}$-gonal curve X with ${\kappa}{\geq}4$ and $deg\mathcal{L}{\geq}{\frac{3}{2}}g+{\frac{g-2}{{\kappa}}}+1$. If L fails to be normally generated, then L is isomorphic to $\mathcal{K}_X-(ng^1_{\kappa}+B)+R$ for some $n{\geq}1$, B and R satisfying (1) $h^0(R)=h^0(B)=1$, (2) $n+3{\leq}degR{\leq}2n+2$, (3) $deg(R{\cap}F){\leq}1$ for any $F{\in}g^1_k $. Its converse also holds under some additional restrictions. As a corollary, a very ample line bundle $\mathcal{L}{\simeq}\mathcal{K}_X-g^0_d+{\xi}^0_e$ is normally generated if $g^0_d{\in}X^{(d)}$ and ${\xi}^0_e{\in}X^{(e)}$ satisfy $d{\leq}{\frac{g}{2}}-{\frac{g-2}{\kappa}}-3$, supp$(g^0_d{\cap}{\xi}^0_e)={\phi}$ and deg$(g^0_d{\cap}F){\leq}{\kappa}-2$ for any $F{\in}g^1_k$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.5
• /
• pp.387-395
• /
• 2008

Stress distribution and interfacial debonding process at the interface between a rubber mold and a powder compact were analyzed during unloading under cold isostatic pressing. The Cap model proposed by Lee and Kim was used for densification behavior of powder based on the parameters involved in the yield function of general Cap model and volumetric strain evolution. Cohesive elements incorporating a bilinear cohesive zone model were also used to simulate interfacial debonding process. The Cap model and the cohesive zone model were implemented into a finite element program (ABAQUS). Densification behavior of powder was investigated under various interface conditions between a rubber mold and a powder compact during loading. The residual tensile stress at the interface was investigated for rubber molds with various elastic moduli under perfect bonding condition. The variations of the elastic energy density of a rubber mold and the maximum principal stress of a powder compact were calculated for several interfacial strengths at the interface during unloading.

• Molecules and Cells
• /
• v.25 no.4
• /
• pp.545-552
• /
• 2008

A hepadnaviruses replicates its DNA genome via reverse transcription of an RNA template (pregenomic RNA or pgRNA), which has a cap structure at the 5' end and a poly(A) tail at the 3' end. We have previously shown that the 5' cap is indispensable for encapsidation of the pgRNA. A speculative extension of the above finding is that the cap contributes to encapsidation via its interaction with the poly(A) tail, possibly involving eIF4E-eIF4G-PABP interaction. To test this hypothesis, poly(A)-less pgRNAs were generated via cleavage by a cis-acting hepatitis delta virus ribozyme sequence. We found that accumulation of the poly(A)-less pgRNA was markedly diminished, mostly likely due to its reduced stability. Importantly, however, the remaining poly(A)-less pgRNAs were nonetheless encapsidated and reverse transcribed normally when the reduced stability was taken account. Our finding clearly contradicts the notion that the poly(A) tail has any function in encapsidation and viral reverse transcription.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.11
• /
• pp.1502-1513
• /
• 2002

The purpose of this study was to find relations between construction factors and adaptability on the 5 available raglan sleeve patterns through the drafting method. Also it was to suggest a functional sleeve pattern according to appearance and adaptability test. Three women in her twenties who have standard figure was selected as subjects. Raglan sleeves of 5 experimental clothes were rated by the appearance test and adaptability test. The major conclusions of this study are as follows. 1. The construction factors of the raglan sleeve are sleeve slant, sleeve cap height, biceps line, breast width. Bicep lines increased and sleeve cap height decreased as the sleeve slant decreased. The higher adaptability scores of raglan sleeves were, the lower sleeve slants were. 2. According to the appearance evaluation, B type was recorded the highest score 3. According to the adaptability scores, A type was recorded the highest score. In the pulled length of the waist-line, A type was the lowest movements among the pattern type. In the pulled length of the sleeve-line, A type was the lowest movements among the pattern types. Therefore A type was evaluated by the bort functional sleeve pattern type. Through the experiments, it was known that appearance and adaptability of the raglan sleeve patterns were effected by construction factor.

• Geomechanics and Engineering
• /
• v.9 no.2
• /
• pp.219-241
• /
• 2015

In this paper, a series of repeated load tests were carried out on a 150 mm diameter plate simulative of vehicle passes, to demonstrate the benefits of soil-rubber shred mixture in decreasing the soil surface settlement of road embankment. The results show that the efficiency of rubber reinforcement is significantly a function of the rubber content, thickness of rubber-soil mixture and soil cap thickness over the mixture. Minimum surface settlement is provided by 2.5% of rubber in rubber-soil mixture, the thickness of mixture layer and soil cap of 0.5 times the loading surface diameter, giving values of 0.32-0.68 times those obtained in the unreinforced system for low and high values of amplitude of repeated load. In this installation, in contrast with unreinforced bed that shows unstable response, the rate of enhancement in settlement decreases significantly as the number of loading cycles increase and system behaves resiliently without undergoing plastic deformation. The findings encourage the use of rubber shreds obtained from non-reusable tires as a viable material in road works.