• Title/Summary/Keyword: 4M analysis

Search Result 13,129, Processing Time 0.055 seconds

A Prospective Clinical Trial on the Mg Oxidized Clinical Implants (마그네슘 양극산화 임플란트의 성공률에 관한 전향적 임상연구)

  • Im, So-Min;Kim, Dae-Gon;Park, Chan-Jin;Cho, Lee-Ra;Um, Heung-Sik;Lee, Jae-Kwan
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.27 no.1
    • /
    • pp.25-39
    • /
    • 2011
  • In animal studies, Magnesium (Mg) - incorporated oxidized implants showed significant enhancement of the bone response. This prospective clinical trial was performed to investigate the success rate, implant stability and marginal bone loss of Mg oxidized clinical implant. The experimental protocol was approved by Institutional Review Board of the Gangneung-Wonju National University Dental Hospital. Fifty healthy patients had partial edentulism were included in this study. Mg oxidized clinical implants (Implant M, Shinhung, Korea) were installed and restored with conventional protocol. The patients were recalled at 1, 3, 6 months after functional loading. Implant stability quotient (ISQ) was measured and periapical radiographic images were obtained. Amount of marginal bone loss was calculated with calibrated images from periapical radiographs. Repeated measured analysis of variance and post hoc Tukey test were used to compare the mean ISQ and bone level. A total of 101 implants were analyzed. The mean ISQ values increased continuously with time lapse from 68.4 at fixture installation to 71.5 at 6 months after loading. Implant stability was correlated with gender, fixture diameter, bone quality and implant sites. The mean marginal bone loss during 6 months after loading was 0.26 mm. There was no failed implant and six-month success rate was 100%. Within the limitations of this study, the six-month success rate of Mg oxidized implant was satisfactory. The implant stability and marginal bone level were excellent. However, further longer clinical studies will be needed to confirm the success of Mg oxidized clinical implant.

Andic Properties of Major soils in Cheju Island 1. Characterization of Volcanic Ash Soils by Selective Dissolution Analysis (제주도(濟州島) 대표토양(代表土壤)의 Andic 특성(特性)에 관(關)한 연구(硏究) 1. 선택적(選擇的) 추출방법(抽出方法)에 의(依)한 화산회토(火山灰土)의 특성(特性) 구명(究明))

  • Song, Kwan-Cheol;Yoo, Sun-Ho
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.24 no.2
    • /
    • pp.86-94
    • /
    • 1991
  • Volcanic ash soils were classified as Andepts, a suborder of the Inceptisols in Soil Taxonomy. Increased knowledge on the volcanic ash soils necessitated and facilitated considerable improvement in this system. As a result, the new Order of Andisols was incorporated in the 1990 edition of the Keys to Soil Taxonomy. The central concept of an Andisol is that of a soil developing in volcanic ejecta, and/or in volcaniclastic materials, whose colloidal fractions are dominated by short-range-order minerals or Al-humus complexes. Andic propertis of volcanic ash soil in Cheju Island were investigated. For this study, soils of toposequence distributed along the southern slope of Mt. Halla, and the major soil groups such as dark brown soils, very dark brown soils, black soils, and brown forest soils were collected and analyzed for Al, Fe and Si extracted with solutions of pyrophosphate, dithionite-citrate. and oxalate respectively. Weolpyeong and Yongheung soils developed on the lower elevations contain only small amounts of allophane and Al-and Fe-humus complexes. For other soils, allophane content decrease with elevation and increaes with soil depth,whereas Al-humus complexes increase with elevation and decrease with soil depth. Substantial amount of allophane and ferrihydrite are found in all horizons of Ora and Ara soils developed on 150-300m elevations and of Noro and Jeogag soils developed on cinder cones. In the A horizons of Pyeongdae, Tosan and Heugag soils developed on the higher elevations, Al-humus complexes are dominant form of Al reflecting low pH and high organic matter content. However, lower horizons are dominated by allophane.

  • PDF

Torque and mechanical failure of orthodontic micro-implant influenced by implant design parameters (교정용 마이크로 임플란트의 디자인이 토오크와 파절강도에 미치는 영향)

  • Yu, Won-Jae;Kyung, Hee-Moon
    • The korean journal of orthodontics
    • /
    • v.37 no.3 s.122
    • /
    • pp.171-181
    • /
    • 2007
  • Objective: The present study was aimed at an analytical formulation of the micro-implant related torque as a function of implant size, i.e. the diameter and length, screw size, and the bony resistance at the implant to bone interface. Methods: The resistance at the implant to cancellous bone interface $(S_{can})$ was assumed to be in the range of 1.0-2.5 MPa. Micro-implant model of Absoanchor (Dentos Inc. Daegu, Korea) was used in the course of the analysis. Results: The results showed that the torque was a strong function of diameter, length, and the screw height. As the diameter increased and as the screw size decreased, the torque index decreased. However the strength index was a different function of the implant and bone factors. The whole Absoanchor implant models were within the safe region when the resistance at the implant/cancellous bone $(=S_{can})$ was 1.0 or less. Conclusion: For bone with $S_{can}$ of 1.5 MPa, the cervical diameter should be greater than 1.5 mm if micro-implant models of 12 mm long are to be placed. For $S_{can}$ of 2.0 MPa, micro-implant models of larger cervical diameter than 1.5 mm were found to be safe only if the endosseous length was less than 8 mm.

Chemistry of mist deposition of organic polymer PEDOT:PSS on crystalline Si

  • Shirai, Hajime;Ohki, Tatsuya;Liu, Qiming;Ichikawa, Koki
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2016.02a
    • /
    • pp.388-388
    • /
    • 2016
  • Chemical mist deposition (CMD) of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) was investigated with cavitation frequency f, solvent, flow rate of nitrogen, substrate temperature $T_s$, and substrate dc bias $V_s$ as variables for efficient PEDOT:PSS/crystalline (c-)Si heterojunction solar cells (Fig. 1). The high-speed camera and differential mobility analysis characterizations revealed that average size and flux of PEDOT:PSS mist depend on f, solvent, and $V_s$. The size distribution of mist particles including EG/DI water cosolvent is also shown at three different $V_s$ of 0, 1.5, and 5 kV for a f of 3 MHz (Fig. 2). The size distribution of EG/DI water mist without PEDOT:PSS is also shown at the bottom. A peak maximum shifted from 300-350 to 20-30 nm with a narrow band width of ~150 nm for PEDOT:PSS solution, whose maximum number density increased significantly up to 8000/cc with increasing $V_s$. On the other hand, for EG/water cosolvent mist alone, the peak maximum was observed at a 72.3 nm with a number density of ~700/cc and a band width of ~160 nm and it decreased markedly with increasing $V_s$. These findings were not observed for PEDOT:PSS/EG/DI water mist. In addition, the Mie scattering image of PEDOT:PSS mist under white bias light was not observed at $V_s$ above 5 kV, because the average size of mist became smaller. These results imply that most of solvent is solvated in PEDOT:PSS molecule and/or solvent is vaporized. Thus, higher f and $V_s$ generate preferentially fine mist particle with a narrower band width. Film deposition occurred when $V_s$ was impressed on positive to a c-Si substrate at a Ts of $30-40^{\circ}C$, whereas no deposition of films occurred on negative, implying that negatively charged mist mainly provide the film deposition. The uniform deposition of PEDOT:PSS films occurred on textured c-Si(100) substrate by adjusting $T_s$ and $V_s$. The adhesion of CMD PEDOT:PSS to c-Si enhanced by $V_s$ conspicuously compared to that of spin-coated film. The CMD PEDOT:PSS/c-Si solar cell devices on textured c-Si(100) exhibited a ${\eta}$ of 11.0% with the better uniformity of the solar cell parameters. Furthermore, ${\eta}$ increased to 12.5% with a $J_{sc}$ of $35.6mA/cm^2$, a $V_{oc}$ of 0.53 V, and a FF of 0.67 with an antireflection (AR) coating layer of 20-nm-thick CMD molybdenum oxide $MoO_x$ (n= 2.1) using negatively charged mist of 0.1 wt% 12 Molybdo (VI) phosphoric acid n-Hydrate) $H_3(PMo_{12}O_40){\cdot}nH_2O$ in methanol. CMD. These findings suggest that the CMD with negatively charged mist has a great potential for the uniform deposition of organic and inorganic on textured c-Si substrate by adjusting $T_s$ and $V_s$.

  • PDF

Expression of Serotonin(5-HT) Receptor Isotypes in Reproductive Organs of Male Rat (수컷 흰쥐 생식기관에서의 세로토닌 수용체 아형 유전자 발현)

  • 이성호
    • Development and Reproduction
    • /
    • v.6 no.2
    • /
    • pp.111-115
    • /
    • 2002
  • 5-Hydroxytryptamine(5-HT; serotonin) system has been implicated in the modulation of male sexual behaviors and the secretion of reproductive hormones. In human males, selective serotonin re-uptake inhibitors(SSRIs) are known to improve the major male sexual dysfunction, premature ejaculation, through the central nervous system-mediated pathways. As numerous hormone and local factors, 5-HT may have peripheral role in the regulation of male sexual function. The expression of 5-HT receptor subtypes in the target tissue, however, has not been explored yet. The present study was undertaken to test whether the 5-HT receptor subtypes are expressed in the reproductive tissues of male rat, especially in ejaculatory machinery such as seminal vesicle and vas deferens. To do this, reverse transcription-polymerase chain reaction(RT-PCR) and Southern blot analysis were employed. The transcripts for the 1A, 1B and 2C subtypes of 5-HT receptor were amplified in all the tested tissues. The present study demonstrated the expression of 5-HT receptor in the rat ejaculatory machinery, suggesting that 5-HT may play a pivotal role in the male sexual function via not only central pathway but also peripheral route. Further study on the receptor subtype-specific effect and their harmonized mode of action will be needed to establish the understanding of ejaculation mechanism and drug design.

  • PDF

평행식 진동탄환 암거 천공기의 연구 (IV)(V)-실기 설계 제작 및 보장실험-Development of Balanced-Type Oscillating Mole Drainer(IV)(V)

  • 김용환;이승규;서상용
    • Journal of Biosystems Engineering
    • /
    • v.2 no.1
    • /
    • pp.7-24
    • /
    • 1977
  • This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

  • PDF

Analysis on the trends and causes of inhabitant's behavioral changes in medical institutions's utilization after enforcement of regional medical insurance. (pilot-project area of regional medical insurance; mainly Kun-wi and Kwang-hwa county) (의료보험(醫療保險) 실시이후(實施以後) 지역주민(地域住民)의 의료기관이용행태(醫療機關利用行態) 변화(變化) 추이(推移)와 그 요인(要因)에 관한 조사연구(調査硏究))

  • Park, Jung-Yeon
    • Journal of Korean Public Health Nursing
    • /
    • v.3 no.2
    • /
    • pp.47-76
    • /
    • 1989
  • The objectives of this study was to analyze the major causes of decreasing utilization rate of health care institutios in pilot-project area of regional medical insurance, Kwang-hwa and Kun-wi country. After the implementation of medical insurance, utilization rate of health institutions turned out' to be lower than it was estimated, when the pilot-project of regional medical insurance was planned. It might be due to changes in inhabitant's behavioral attitude toward medical insurance. So this study was made to find measures for financial stability by increasing utilization rate of health care institutions and to be available for basic demand-supply program of medical care. The hypothesis of this study was as follows; First. there is difference in understanding health care institutions between Kun-wi and Kwang-hwa. Second. respondesnts of inquiry survey have exact knowledge of their past experience of treatment taken prior to enforcement of medical insurance, Questionaire survey was made as to each 700 household among total 11, 884 households in Kun-wi and 20,919 households in Kwang-hwa. In case of Kun-wi, 70% of inquired households (491) gave their answers. In Kwang-hwa, the number was 560 households (80% of inquireds). Dollected data was processed and analyzed by way of using SPSS batch system. To evaluate facto rs distribution aspects of data and to make comparison between two area, percentage and $X^2$ distribution were applied. The results were as follows; L The utilization rate of health care institutions in Kun-wi and Kwang-hwa was lower than it was estimated. when pilot-project of medical insurance was planned. 2. Prior to the implementation of medical insurance. inhabitants in two area chose the medical institutions considering such factors. First was medical care fee cheap. second in habitant's residence, Third was the institutions conveniently easy of access. 3. After the implementation of medical insurance. 26.1% of inqurieds in Kun-wi and 41.6% in Kwang-hwa, changed medical institutions. In case of Kwn-wi, from health care institution (p 0.05), and in case of Kwang-hwa, vice versa, from general medical institutions to health care institutions. 4. Evaluation by factors were made such as follows. Inquired gave high marks to following facts: In case of Kun-wi, general medical institutions were difficult of access and relation between patients: was not friendly, but burden of medical expenditure was light. Effects of treatment and facilities was good. In case of Kwang-hwa, inquired gave high evaluation marks to the follow ing facts; facilities of medical institutions was not good, but the burden of medical expenditure was light. 5. After the implementation of medical insurance, the services was evaluated as good, but inquired hopec for lessening the burden of medical expenditure. 6. In case of exact understanding of cost-sharing, the evaluation rate in Kwang-hwa was higher than that of Kun-wi (p < 0.005). And positive attitude toward necessity of medical insurance was also good in Kwang-hwa (p < 0.05). 7. In case of inquired's attitude toward medical institutions, Kwang-hwa showed positive response (p < 0.05) 8. In the case of comparison between general medical institution and health care institution, two area showed similar positive response; medical manpower, facilities of medical institutions and effest: of treatement was good. 9. In comprehensive evaluation of benefit-service; the general medical institution's positiveness was higher than that of health care institutions in Kun-wi. But in Kwang-hwa vice-versa. 10. If the medical expenditure of general medical institution and health care institutions was equal 77% of inquireds in Kun-wi and 59.1% in Kwang-hwa answered that they chose general medical insurance. Considering results above mentioned, the conclusion of this study was made as follows. 1. In Kwang-hwa county, where the understanding of health care institutions's was good, the utilization's of health care institutions was shown high. Therefore, in case of Kwang-hwa, betterment: should be made to induce increasing utilization rate for negative factors of health care institutions. 2. In case of Kun-wi, where the understanding of health care institutions was on the decrease, measures for changing such negative factors should be taken by way of strengthening public relations. And cases of Kwang-hwa should also be studied. 3. On the side of financial stabilization and establishing health care delivery system, primary health care should be available. Therefore, the major cause of inhabitant's avoiding health care institutions should be known. And measures for activating that institutions have to be taken. So, the facilities of health care institution have to be improved up to the level of clinic. And supportive measures for securing equipment and improving health care services should also be taken. It is necessary that strategy for public relations should be employed with policy considerations and supports.

  • PDF

Development and Application of a Methodologyfor Climate Change Vulnerability Assessment-Sea Level Rise Impact ona Coastal City (기후변화 취약성 평가 방법론의 개발 및 적용 해수면 상승을 중심으로)

  • Yoo, Ga-Young;Park, Sung-Woo;Chung, Dong-Ki;Kang, Ho-Jeong;Hwang, Jin-Hwan
    • Journal of Environmental Policy
    • /
    • v.9 no.2
    • /
    • pp.185-205
    • /
    • 2010
  • Climate change vulnerability assessment based on local conditions is a prerequisite for establishment of climate change adaptation policies. While some studies have developed a methodology for vulnerability assessment at the national level using statistical data, few attempts, whether domestic or overseas, have been made to develop methods for local vulnerability assessments that are easily applicable to a single city. Accordingly, the objective of this study was to develop a conceptual framework for climate change vulnerability, and then develop a general methodology for assessment at the regional level applied to a single coastal city, Mokpo, in Jeolla province, Korea. We followed the conceptual framework of climate change vulnerability proposed by the IPCC (1996) which consists of "climate exposure," "systemic sensitivity," and "systemic adaptive capacity." "Climate exposure" was designated as sea level rises of 1, 2, 3, 4, and 5 meter(s), allowing for a simple scenario for sea level rises. Should more complex forecasts of sea level rises be required later, the methodology developed herein can be easily scaled and transferred to other projects. Mokpo was chosen as a seaside city on the southwest coast of Korea, where all cities have experienced rising sea levels. Mokpo has experienced the largest sea level increases of all, and is a region where abnormal high tide events have become a significant threat; especially subsequent to the construction of an estuary dam and breakwaters. Sensitivity to sea level rises was measured by the percentage of flooded area for each administrative region within Mokpo evaluated via simulations using GIS techniques. Population density, particularly that of senior citizens, was also factored in. Adaptive capacity was considered from both the "hardware" and "software" aspects. "Hardware" adaptive capacity was incorporated by considering the presence (or lack thereof) of breakwaters and seawalls, as well as their height. "Software" adaptive capacity was measured using a survey method. The survey questionnaire included economic status, awareness of climate change impact and adaptation, governance, and policy, and was distributed to 75 governmental officials working for Mokpo. Vulnerability to sea level rises was assessed by subtracting adaptive capacity from the sensitivity index. Application of the methodology to Mokpo indicated vulnerability was high for seven out of 20 administrative districts. The results of our methodology provides significant policy implications for the development of climate change adaptation policy as follows: 1) regions with high priority for climate change adaptation measures can be selected through a correlation diagram between vulnerabilities and records of previous flood damage, and 2) after review of existing short, mid, and long-term plans or projects in high priority areas, appropriate adaptation measures can be taken as per this study. Future studies should focus on expanding analysis of climate change exposure from sea level rises to other adverse climate related events, including heat waves, torrential rain, and drought etc.

  • PDF

Usefulness of the Waist Circumference-to-Height Ratio in Screening for Obesity in Korean Children and Adolescents (한국 소아청소년 비만에서 허리둘레-신장비의 유용성)

  • Gil, Joo-Hyun;Lee, Mi-Na;Lee, Hye-Ah;Park, Hye-Sook;Seo, Jeong-Wan
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • v.13 no.2
    • /
    • pp.180-192
    • /
    • 2010
  • Purpose: To evaluate the feasibility and usefulness of the waist circumference-to-height ratio (WHTR) in screening for obesity in Korean children and adolescents. Methods: Data, including body mass index (BMI), waist circumference (WC), and height, were obtained from the national growth surveys for children and adolescents in 2005. The WHTR was calculated dividing WC by height in subjects 2~18 years of age. Overweight and obese were defined by BMI percentiles for age and gender. The receiver operating characteristic (ROC) analysis was performed to find out the optimal cutoff values of WHTR that matched BMI-determined overweight and obesity using the STATA program. The area under the curve (AUC), a measure of diagnostic power, of WHTR was compared to WC. The influence of age on WHTR was analyzed by the SAS program. Results: The WHTR significantly decreased with age, and had less correlation with age in the 6~18-year-old age group than the 2~5-year-old age group. Furthermore, the WHTR also had less correlation with age than WC in the 6~18-year-old age group. The AUC of WHTR in identifying overweight and obesity was significantly higher than the AUC of WC in the 6~18-year-old age group. The optimal cutoff values were 0.51 in boys and 0.49 in girls for obesity, and 0.48 in boys and 0.47 in girls for overweight, with all having the AUC>0.9. The optimal cutoff values of WHTR had a higher sensitivity for diagnosing obesity than WC${\geq}$90th percentiles. Conclusion: The WHTR is an easy, accurate, and less age-dependent index with high applicability in screening for obesity in children and adolescents.

Associations of Metabolic Syndrome with Glaucoma in Korean - Based on the Korean National Health and Nutrition Examination Survey 2005, 2007-9, 2010 (한국인의 대사증후군과 녹내장 간의 상관관계 -2005, 2007-9, 2010국민건강영양조사 이용)

  • Park, Sang Shin;Kim, Taehun;Pak, Yun-Suk;Lee, Sang-Yoon;Lee, Hae Jung;Lee, Eun-Hee
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.17 no.2
    • /
    • pp.241-247
    • /
    • 2012
  • Purpose: This study was conducted to assess the association of metabolic syndrome and its components with glaucoma. Methods: We investigated the associations of metabolic syndrome and its components (abdominal obesity, impaired fasting glucose, high blood pressure, and dyslipidemia) with glaucoma using data from 19,162 adults aged 40 or above among the Korean National Health and Nutrition Examination Survey III (2005), IV (2007-9), V (2010). The logistic regression analysis was used for assessing those associations after adjusting demographic, lifestyle, and social economic status and for assessing the association of metabolic medication intakes with glaucoma risks. Results: After adjusting for age and sex, the risk of glaucoma was significantly higher in the subjects with impaired fasting glucose(Odds Ratio (95% confidence interval): 1.78 (1.25, 2.53)) and metabolic syndrome (1.45 (1.01, 2.08)) than subjects without those. These associations increased when additional adjusting for smoking, alcohol use, regular physical activity, income, education status(impaired fasting glucose: 1.89 (1.29, 2.77), metabolic syndrome: 1.52 (1.03, 2.25)). Glaucoma prevalence was borderline significantly increased according to the number of metabolic abnormalities(age and sex adjusted p for trend = 0.055). Use of antihypertensive medication was significantly associated with the risk of glaucoma. Conclusions: Metabolic syndrome and impaired fasting glucose were significantly associated with the increased glaucoma risk. Use of antihypertensive medication was also significantly associated with the increased glaucoma risk.