• 제목/요약/키워드: 4DT

검색결과 429건 처리시간 0.03초

ATM 망에서 다양한 트래픽을 지원하기 위한 동적 셀 스케줄링 알고리즘 (A New Implementable Scheduling Algorithm Supporting Various Traffics in ATM Networks)

  • 심재정;이원호;변재영;고성제
    • 한국통신학회논문지
    • /
    • 제25권4B호
    • /
    • pp.675-682
    • /
    • 2000
  • 본 논문에서는 ATM 네트워크에서 다양한 멀티미디어 트래픽을 효율적으로 전송하기 위해 동적 우선순위 셀 전송 스케쥴링 기법인 AWRR/DT(Adaptive Weighted Round Robin with Delay Tolerance)를 제안하였다. AWRR/DT는 멀티미디어 트랙픽을 지연 특성에 따라 여러 개의 실시간 클래스와 하나의 비실시간 클래스로 분류하고, 각 클래스의 지연 특성과 입력 트래픽의 양을 고려하여 매 사이클마다 해당 클래스에 적절한 가중치(weight)를 할당 하도록 설계되었다. 또한, 제안한 알고리즘은 셀 폐기 메커니즘을 가지고 있어서 순간적인 서비스 품질(QoS:Quality of Service)열화가 계속 연속적으로 이어지는 현상을 줄여준다. AWRR/DT의 성능을 평가하기 위하여, SLAM II를 이용한 컴퓨터 시뮬레이션을 통해 기존의 스케쥴링 기법들과 평균 지연 측면에서 비교하였다. 그 결과, 제안한 기법이 실시간 트래픽 클래스의 QoS를 만족하면서도 비실시간 트래픽 클래스의 평균 지연을 감소시키 수 있음을 확인하였다.

  • PDF

화력 발전용 고압 로터강의 정하중 및 변동하중하의 고온 크립 균열전파 특성에 관한 연구 (A Study on the High Temperature Creep Crack Growth Properties for Steam Turbine Rotor Steel under Static and Cyclic Loading Condition)

  • 오세규;정순억
    • 한국해양공학회지
    • /
    • 제5권2호
    • /
    • pp.207-207
    • /
    • 1991
  • The crack length measurements by electrical potential(EP) method for 1% Cr-Mo-V and 12%Cr steel of 0.5T-CT specimen were performed at $500^{\circ}C, 600^{\circ}C 700^{\circ}C$, and an applicability of stress intensity factor($K_I$), net section stress($\sigma_{net}$), $C^*$-ingegral and $C_t$ parameter was studied to measure creep crack growth rate(da/dt) with side groove and without side groove under static and cyclic loading condition. The experimental result could be summarized as follows: 1) Crack measurement by EP method was available and coincided with the Johnson,s analytical equation. 2) da/dt by $K_I$ and $\sigma_{net}$ was not adequate because of the wide scatter band according to load and temperature, but $C^*$-integral, except for transition region, was adequate. 3) $C_t$ parameter showed the best fitted line through total creep region without relating with both temperature and load condition. 4) Under the cyclic loading condition, $C_t$ parameter was proper to extimate da/dt. And it was shown that da/dt for 1% Cr-Mo V steel under the static condition(R=1) was 1.16 times faster than the case under cyclic loading(R=0), and for 12% Cr steel, 1.43 times.

화력 발전용 고압 로터강의 정하중 및 변동하중하의 고온 크립 균열전파 특성에 관한 연구 (A Study on the High Temperature Creep Crack Growth Properties for Steam Turbine Rotor Steel under Static and Cyclic Loading Condition)

  • 오세규;정순억
    • 한국해양공학회지
    • /
    • 제5권2호
    • /
    • pp.67-75
    • /
    • 1991
  • The crack length measurements by electrical potential(EP) method for 1% Cr-Mo-V and 12%Cr steel of 0.5T-CT specimen were performed at $500^{\circ}C, 600^{\circ}C 700^{\circ}C$, and an applicability of stress intensity factor($K_I$), net section stress($\sigma_{net}$), $C^*$-ingegral and $C_t$ parameter was studied to measure creep crack growth rate(da/dt) with side groove and without side groove under static and cyclic loading condition. The experimental result could be summarized as follows: 1) Crack measurement by EP method was available and coincided with the Johnson, s analytical equation. 2) da/dt by $K_I$ and $\sigma_{net}$ was not adequate because of the wide scatter band according to load and temperature, but $C^*$-integral, except for transition region, was adequate. 3) $C_t$ parameter showed the best fitted line through total creep region without relating with both temperature and load condition. 4) Under the cyclic loading condition, $C_t$ parameter was proper to extimate da/dt. And it was shown that da/dt for 1% Cr-Mo V steel under the static condition(R=1) was 1.16 times faster than the case under cyclic loading(R=0), and for 12% Cr steel, 1.43 times.

  • PDF

지리산에서 고도에 따른 질경이(Plantago asiatica) 개체군의 온도에 대한 발아습성의 변이 (Variation of the Germination Responses to Temperature of Plantago asiatica Seed Population along Altitude in Mt. Chiri)

  • Lee, Ho-Joon;Kim, Yong-Ok;Jeon, Jae-Hee;Seong, Mi-Seon;Jang, Il-Do
    • The Korean Journal of Ecology
    • /
    • 제17권4호
    • /
    • pp.485-499
    • /
    • 1994
  • This study was focused on the effect of the altitude on the geographical variations of germination characteristics in the populations of Plantago asiatica L. distribute in Mt. Chiri. There was a significant difference among the 14 groups in the phenological pattern in relation to altitudes. When the altitude becomes higher, the thermal time which was required for 10 to 80% germination rate showed higher and wider distribution. On the other hand, the germination response of increasing temperature (IT) and secreasing temperature (DT) regime was classified into 3 group. The first group was the spering germination type. This group showed that the IT regime hadhigher germination rate than that of the DT regime, and was distributed in Macheon(300m) and Packmudong (500m). The second was the spring-fall germination type which was distributed in Hadong (900m) and Saemt대 (1100m). This group also showed higher germination rate in the IT regime, but the difference of the germination rate between IT and DT regime was less than that in the first group (the spring type). The third group was the early fall germination type which was found in the Nogodan (1507m), Changetomok (1750m) and Cheonwangbong (1915m). The germination rate of this group showed almost 100% similarity between IT and DT regime. These data suggested that the geographical varations of germination characteristics within species was an important ecological strategy for the survival from severe environmental conditions.

  • PDF

옥수수 전분과 Hydrocolloids 첨가가 녹두 전분 및 묵의 특성에 미치는 영향 (Effects of Added Corn Starches and Hydrocolloids on the Characteristics of Mungbean Starch and the Mook(Starch Gel))

  • 박옥진;김광옥
    • 한국식품과학회지
    • /
    • 제20권4호
    • /
    • pp.618-624
    • /
    • 1988
  • 대체 전분과 hydrocolloids(xanthan gum과 locust bean gum의 혼합물)첨가에 따른 조전분 및 녹두묵의 특징을 평가하기 위해 DSC와 amylograph를 이용하여 전분의 호화양상을 측정하였고, 관능검사 및 IUTM 측정을 통해 묵의 텍스쳐 특성을 조사하였다. 상 전이 엔탈피는 녹두-가교 혼합 전분이 녹두-비 변성혼합 전분보다 녹두 조전분에 더 유사하제 나타났다. Hydrocolloids 첨가는 초기점도 증가에는 크게 영향을 미치지 않았으나 온도가 높아지면서 점도를 현저하게 증가시켰다. $50^{\circ}C$까지 냉각한 후의 점도는 가교혼합 전분과 녹두 조전분이 유사하게 나타났다. 관능검사의 삼점검사 결과에서는 표준묵과의 차이를 감지하지 못하는 농도가 가교전분에서 더 높았다. 또한 혼합전분 사용시 녹두묵의 단단한 정도와 응집력이 hydrocolloids첨가시 그 차이를 감소시키는 것으로 나타났다. IUTM 측정결과, 변형도에 따라 받는 힘의 크기가 다른 것을 알 수 있으며 90% 변형에서 나타난 단단한 정도는 관능검사의 결과와 유사한 경향을 나타냈다. 따라서 본 실험과 같은 조건하에서는 녹두묵 제조시 hydrocolloids를 첨가함으로써 대체 전분의 이용가능성을 더 증가시킬 수 있다고 생각된다.

  • PDF

수소 동위원소 분리를 위한 초저온증류공정 모사 (Cryogenic Distillation Simulation for Hydrogen Isotopes Separation)

  • 노상균;노재현;조정호
    • 한국산학기술학회논문지
    • /
    • 제14권9호
    • /
    • pp.4643-4651
    • /
    • 2013
  • 본 연구에서는 ITER의 수소동위원소 분리 시스템에 포함되어 있는 심냉 증류공정과 평형 반응기 및 헬륨 냉매를 이용한 냉동 사이클에 대해 추적조사를 실시하였다. 또한 Aspen Plus나 PRO/II with PROVISION과 같은 정상 상태 화학공정 모사기에 내장되어 있지 않은 $H_2$, HD, $D_2$, HT, DT와 $T_2$ 성분에 대한 열역학 및 전달물성을 수집하였다. 문헌치로부터 구한 물성 데이터와 전산모사를 통해서 추산한 물성결과 사이의 비교 및 검증작업을 수행하였다. 6개의 수소동위원소 성분을 포함한 동위원소 분리를 위해서 4기의 심냉 증류탑과 2기의 평형 반응기를 사용해서 $T_2$로부터 $D_2$ 및 DT를 분리해 내기 위한 전산모사를 수행하였다.

천골후두골 테크닉을 이용한 카이로프랙틱이 만성 요통환자의 통증과 신체기능에 미치는 영향 (Effects of Chiropractic Using Sacro Occipital Technique on Pain and Physical Function in Patients with Low Back Pain)

  • 정지문;김재희
    • 한국산학기술학회논문지
    • /
    • 제14권9호
    • /
    • pp.4402-4411
    • /
    • 2013
  • 본 연구의 목적은 천골후두골 테크닉을 이용한 카이로프랙틱이 만성 요통환자의 통증과 신체기능에 미치는 영향을 규명하는 것이다. 만성요통이 있는 여성 45명을 세 실험군에 15명씩 무선할당하여 디버시파이드 테크닉, 천골 후두골 테크닉 또는 두 테크닉을 혼합하여 주 2회, 8주간 시술하였다. 무처치 대조군은 요통이 없는 건강한 여성 12명으로 구성되었다. 시술 전, 4주후, 8주후에 요통은 시각적상사척도, Oswestry와 Roland-Morris 요통장애지수로 측정하였고, 신체기능은 요부 근력과 유연성 및 체형으로 평가하였다. 처치 4주와 8주 후 대조군에서는 유의한 변화가 나타나지 않은 반면, 세 실험군 모두에서 요통강도와 요통장애지수가 유의하게 감소하였으며(모두 p<.001), 요부근력과 유연성 및 어깨와 골반 균형도 향상되었다(모두 p<.05). 결론적으로 천골후두골 테크닉과 디버시파이드 테크닉을 이용한 카이로프랙틱 시술 모두 요통환자의 통증의 경감과 기능 향상에 효과적인 것으로 사료된다.

유방암 수술환자의 디스트레스 및 연관인자 : 단면연구 (Distress and Associated Factors in Patients with Breast Cancer Surgery : A Cross-Sectional Study)

  • 이상신;임효덕;우정민
    • 정신신체의학
    • /
    • 제26권2호
    • /
    • pp.77-85
    • /
    • 2018
  • 연구목적 유방암 환자가 치료 초기에 경험하는 디스트레스는 유방암 생존기까지 지속되는 만성 디스트레스의 위험요소로 알려져 있다. 본 연구는 유방암 첫 치료로써 수술을 받은 환자를 대상으로 디스트레스 온도계(distress thermometer, DT)를 이용하여 디스트레스의 정도와 이와 연관된 인자를 조사하는 것이다. 방 법 2013년 4월 1일부터 2017년 3월 31일 사이에 경북대학교병원에서 유방암 첫 치료로써 수술을 받고 일주일 이내에 있는 환자를 대상으로 하였다. DT로 디스트레스의 정도를 측정하였고 한국판 세계보건기구 삶의 질척도 단축형(Korean version of the World Health Oganization Quality of Life Scale Abbreviated Version, WHOQOL-BREF)으로 삶의 질을 측정하였다. 그 외 기본 인구학적 자료, 암 및 암 치료 관련 자료를 수집하였다. DT 점수 4점 이상인 대상자를 디스트레스 군으로 분류하였다. 디스트레군과 연관된 인자를 알기 위하여 디스트레스군과 비-디스트레스 군 사이의 변수 차이를 단변수 분석(univariable analysis) 하였다. 로지스틱 회귀분석을 시행하여 디스트레스 군을 예측할 수 있는 인자를 조사하였다. 결 과 대상자는 총 307명이었다. 이 중에서 DT에 응답하지 않은 39명, WHOQOL-BREF에서 6개 항목 이상 답을 하지 않아서 채점을 할 수 없었던 4명을 제외한 264명이 분석 대상자였다. 65.5%(n=173)가 디스트레스 군으로 분류되었다. 단변수 분석(univariable analysis)에서 디스트레스 군이 비-디스트레스 군과 비교하여 더 젊었으며(p=0.045), 배우자와 동거하지 않는 경우가 더 많았다(p=0.032). 삶의 질 영역에서 디스트레스 군이 전반적 삶의 질(p=0.009), 전반적 건강상태(p=0.005), 신체건강영역 p<0.001), 심리건강영역(p=0.002)에서 더 나쁜 삶의 질을 보였다. 로지스틱 회귀분석에서 60세 이상의 환자에 비하여 40-49세의 환자가 디스트레스에 이환 될 확률이 약 3배 높았고[OR=2.992, 95% confidence intervals (CI) 1.241-7.215], WHOQOL-BREF영역 중 신체건강영역이 디스트레스를 예측할 수 있는 인자로 나타났다(OR=0.777, 95% CI 0.692-0.873). 결 론 유방암 수술 치료 초기단계에서부터 상당한 수의 환자가 유의한 수준의 디스트레스를 경험하고 있다. 특히 생산성이 왕성한 삶의 주기에 있는 40대의 환자가 60대 이상의 환자에 비하여 수술 후 일주일 이내에 겪는 심리적 고통이 심할 가능성이 높다. 이러한 환자들에게서 수술 초기부터 신체적 삶의 질과 연관된 영역(예 : 통증, 불면, 피로 등)에 대해 평가하고 개입하는 것이 디스트레스 수준을 경감시킬 가능성이 있다.

하폐수의 자연환경에서 R plasmid와 재조합 유전자의 전이특성( I ) -$Km^rCm^r$유전자의 클로닝- (Transfer of R plasmids of Bacterial Isolates and Their Cloned R Genes in Natural Wastewater Environments (I) -Cloning of $Km^rCm^r$Gene-)

  • 김치경;이성기
    • 한국미생물·생명공학회지
    • /
    • 제17권5호
    • /
    • pp.447-453
    • /
    • 1989
  • 항생물질 내성유전자를 유전자 조작기법으로 재조합시켜 만든 세균에서 그 유전자들이 전이되는 특성을 하폐수의 자연환경에서 연구하기 위하여, 자연계로부터 분리한 Gram 음성세균 중에서 kanamycin (Km), chloramphenicol (Cm), streptomycin (Sm), sulfadiazine(Su)에 내성을 띄는 균주로 DK1을 선발하였다. DK1 균주는 4개의 plasmid를 가지고 있으나 그 중 크기가 약 68kb인 pDK101 plasmid에 Km$^{${\gamma}$}$ Cm$^{${\gamma}$}$ 유전자를 가지고 있었다. 이 pDK101 plasmid에는 EcoRI site가 16개, PstI site가 32개, SalI site가 6개씩 있었다. pDK101 plasmid 와 vector로 사용한 pKT230을 E. coli으로 처리하여 얻은 절편들로부터 Km$^{${\gamma}$}$Cm$^{${\gamma}$}$ 유전자를 가지는 pDT309와 pDTS29 등의 chimeric piasmid를 제조하였다. 이들을 다시 E. coli C600과 E. coli HB101 에 형질전환 시킴으로써, DKC601, DKC602, DKH 102 그리고 DKH103 등의 재조합 균주를 얻었다. 이들 재조합 균주에서는 모두 Km$^{${\gamma}$}$Cm$^{${\gamma}$}$유전자가 잘 발현되었으며, 그 중 DKC601과 DKH103에서는 각각 pDT529와 pDT309의 chimeric plasmid가 포함되어 있는 것이 전기영동 방법으로 명확히 확인되었다.

  • PDF

비만과 치아우식증의 관계 (Relationship between Obesity and Dental Caries)

  • 이선희
    • 디지털융복합연구
    • /
    • 제12권12호
    • /
    • pp.633-641
    • /
    • 2014
  • 본 연구는 비만과 치아우식증의 관계를 파악하고자 대한민국 전국단위의 건강 및 영양조사인 국민건강영양조사 제 4기 3차년도(2009) 원시자료를 활용하여 연구하였다. 연구대상은 만 19세 이상 성인 중 비만과 치아우식증 관련 변수의 결측 대상자를 제외하여 최종 7,393명이다. 자료 분석은 SPSS 18.0 프로그램을 이용하였으며, 유의수준 0.05로 분석한 결과 다음과 같은 결과를 얻었다. 1. 저체중(${\beta}$ = 0.21, p=.03)은 정상에 비해 DT 개수가 높게 나타났고, 과체중(${\beta}$ = -0.12, p=.02)은 정상에 비해 DT 개수가 낮게 나타났다. 2. 비만(OR = 0.69, 95% CI: 0.57, 0.84)은 정상에 비해 DMFT를 가질 가능성이 낮게 나타났다. 3. 저체중(${\beta}$ = 1.14, p<.001)은 정상에 비해 DMFT 개수가 높게 나타났고, 과체중(${\beta}$ = -0.39, p = .02)과 비만(${\beta}$ = -0.70, p<.0001)은 정상에 비해 DMFT 개수가 낮게 나타났다. 결론적으로, 비만(체질량지수)과 치아우식증(DT, DMFT)은 음의 상관관계를 갖는 것으로 밝혀졌으며, 혼란변수를 보정한 후에도 유사한 결과가 나타났다.