• 대한치과의사협회지
• /
• 제12권1호
• /
• pp.29-34
• /
• 1974

In order to appreciate the school dental services of the primary, middle, and high school and to get the basic data for the university dental service programs in Korea, the author had examined the oral health status of 1,300 freshmen in S University. Then, the followed results were obtained from the calculation and evaluation of DEMT index, DT index, MT index, FT index, DT rate, MT rate, FT rate, debris deposit rate, calculus deposit rate, periodontal disease rate, and abnormal jaw relation rate. 1. DMFT index in the freshmen was higher than that of the Korean youth in the same age. 2. It seems the above result to be appeared from the influence of the intake of the more carbohydrate foods in the freshmen. 3. In the freshmen, MT rate was lower, and FT rate higher than in the Korean youth in the same age. 4. The oral hygiene condition was good in 3.15% of the freshmen. 5. Calculus was not deposited in 8.69% of the freshmen. 6. In 9.69% of the freshmen, the periodontium was healthy. 7. In Korea, the school dental services in the primary, middle, and high schools must be improved. 8. There was the abnormal jaw relation in 12.92% of the freashmen.

• 전력전자학회논문지
• /
• 제13권4호
• /
• pp.311-318
• /
• 2008

본 논문은 소프트 스위칭 기법을 적용한 싱크로너스 양방향 DC-DC 컨버터를 제안한다. 제안된 컨버터는 싱크로너스 벅 컨버터를 병렬구성을 하여 인터리브드 기법을 통해 도통 손실을 줄이고, 하나의 공진인덕터를 사용한 ZVT-Cell을 적용함으로써 스위칭 손실을 최소화 하였다. 전 부하 범위에서 CCM(Continuous Conduction Mode) 으로 동작하고 ZVS가 성립되도록 하였으며, 전류주입 기법을 통해 넓은 출력전압 범위에서도 ZVS 조건을 만족하였다. 또한, 기존 싱크로너스 벅 컨버터의 데드타임(dead time)동안 발생하는 역병렬 다이오드의 도통손실 및 dv/dt, di/dt 발생을 저감하는 효과를 얻을 수 있다. 제안된 컨버터의 유효성은 실험을 통해서 검증하였다.

• Earthquakes and Structures
• /
• 제19권6호
• /
• pp.411-425
• /
• 2020

Unreinforced masonry (URM) walls present low shear strength and are prone to brittle failure when subjected to inplane seismic overloads. This paper discusses the shear strengthening of URM walls with Textile Reinforced Mortar (TRM) jackets. The available literature is thoroughly reviewed and an extended database is developed including available brick, concrete and stone URM walls retrofitted and subjected to shear tests to assess their strength. Further, the experimental results of the database are compared against the available shear strength design models from ACI 549.4R-13, CNR DT 215 2018, CNR DT 200 R1/2013, Eurocode 6 and Eurocode 8 guidelines as well as Triantafillou and Antonopoulos 2000, Triantafillou 1998, Triantafillou 2016. The performance of the available models is investigated and the prediction average absolute error (AAE) is as high as 40%. A new model is proposed that takes into account the additional contribution of the reinforcing mortar layer of the TRM jacket that is usually neglected. Further, the approach identifies the plethora of different block materials, joint mortars and TRM mortars and grids and introduces rational calibration of their variable contributions on the shear strength. The proposed model provides more accurate shear strength predictions than the existing models for all different types of the URM substrates, with a low AAE equal to 22.95%.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권4호
• /
• pp.405-411
• /
• 2020

In this paper, we designed the COS MEMS system for sensing the falling detection and explosive noise of fuse link in COS (Cut Out Switch) installing on the power distribution. This system analyzed the failure characteristics and an instantaneous breakdown of power distribution. Therefore, our system strengths the industrial competence and guaranties the stable power supply. In this paper, we applied BLE (Bluetooth Low Energy) technology which is suitable protocol for low data rate, low power consumption and low-cost sensor applications. We experimented with LSM6DSOX which is system-in-module featuring 3 axis digital accelerometer and gyroscope boosting in high-performance mode and enabling always-on low-power features for an optimal motion for the COS fuse holder. Also, we used the MP34DT05-A for gathering an ultra-compact, low power, omnidirectional, digital MEMS microphone built with a capacitive sensing element and an IC interface. The proposed COS MEMS system is developed based on nRF52 SoC (System on Chip), and contained a 3-axis digital accelerometer, a digital microphone, and a SD card. In this paper of experiment steps, we analyzed the performance of COS MEMS system with gathering the accelerometer raw data and the PDM (Pulse Data Modulation) data of MEMS microphone for broadcasting the failure of COS status.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권3호
• /
• pp.112-118
• /
• 2001

In the near future, the voltage of power system for passenger vehicle will be changed to 42V from existing 14V./ Because of increasing power and voltage ratings used in the vehicle the motor drive system has high switching dv/dt and it generates electromagnetic interference (EMI) To solve these problems multi-level inverter system may be used The feature of multi-level inverter is the output voltage to be synthesized from several levels of voltage Because of this feature high switching dv/dt and EMI can be reduced in the multi-level inverter system But as the number of level is increased manufacturing cost is getting expensive and system size is getting large. Because of these disadvantages the application of multi-level inverter has been restricted only to high power drives. The method to reduce manufacturing cost and system size is to integrate circuit of multi-level inverter into a few chips But isolated power supply and signal isolation circuit using transformer or opto-coupler for drive circuit are obstacles to implement the integrated circuit (IC) In this paper a drive circuit of 4-level inverter suitable for integration to hybrid or one chip is proposed In the proposed drive circuit DC link voltage is used directly as the power source of each gate drive circuit NPN transistors and PNP transistors are used to isolate to transfer the control signals. So the proposed drive circuit needs no transformers and opto-couplers for electrical isolation of drive circuit and is constructed only using components to be implemented on a silicon wafer With th e proposed drive circuit 4- level inverter system will be possible to be implemented through integrated circuit technology Using the proposed drive circuit 4- level inverter system is constructed and the validity and characteristics of the proposed drive circuit are proved through the experiments.

• 대한소아치과학회지
• /
• 제3권1호
• /
• pp.52-62
• /
• 1976

The purpose of this paper is to present the clinical findings obtained from the fourth year epidemiological study on dental caries prevalence in Korean children and to compare them with those from the first year study made in 1973 by Paik. The oral examination was performed for this study on 1,451 children, composed of 808 boys and 643 girls, at "K" elementary school located in Seoul, Korea. The following conclusions are drawn: 1. The df person rate of primary teeth is 90.30% for boys, 90.67% for girls, and 90.43% for all, which is 7.41% higher than the first year value. 2. The dft index per child of primary teeth is 4.26 for boys, 4.30 for girls, and 4.28 for all, which is 0.42 higher than the first year value. The dt index is 2.49 for boys, 2.44 for girls, and 2.47 for all, which is 0.59 lower than the first year value. The ft index is 1.77 for boys, 1.86 for girls, and 1.81 for all, which is 1.01 higher than the first year value. 3. The DMF person rate of permanent teeth is 70.24% for boys, 73.05% for girls, and 71.49% for all, which is 16.28% lower than the first year value. 4. The DMFT index per child of permanent teeth is 2.08 for boys, 2.50 for girls, and 2.27 for all, which is 1.31 lower than the first year value. The DT index is 1.44 for boys, 1.64 for girls, and 1.53 for all, which is 1.53 lower than the first year value. The FT index is 0.61 for body, 0.85 for girls, and 0.71 for all, which is 0.21 higher than the first year value. The MT index is 0.02 for all, which is statistically the same as the first year value.

• Journal of Korean Neurosurgical Society
• /
• 제29권12호
• /
• pp.1563-1569
• /
• 2000

Objective : Delayed ischemic neurologic deficit(DIND) is one of the major complications following aneurysmal subarachnoid hemorrhage(SAH). However, the correlation between angiographic vasospasm(AV) and DIND after SAH is not precisely known. The authors investigated the timing, incidence, characteristics of DIND, and analyzed correlation between AV and DIND. Patients and Methods : A series of 126 patients with SAH and performed cerebral angiography which, confirmed anterior circulation aneurysm, admitted to between January 1996 to December 1998, were studied retrospectively. A comparative analysis between group 1(G1) in which AV patients presented with DIND, and group 2(G2) patients did not DIND, were done. AV was graded according to location, distribution and degree. Location of vasospasm was classified as basal type(BT), distal type(DT). BT was involved horizontally and include the bilateral carotid systems, proximal middle cerebral artery(MCA) and proximal anterior cerebral artery(ACA). DT was involved vertically and include the MCA branches as they become vertically or posteriorly oriented and the ACA distal to the anterior communicating artery. BT and DT all defined ether as localized type(LT) or combined type(CT). Distribution of vasospasm was classified as type I, type II and type III. Type I represents the involvement of bilateral carotid systems and bilateral anterior cerebral artery, type II was designed as one carotid system without involving anterior cerebral artery, and type III when only some portions of the anterior cerebral artery were involved, bilaterally. Degree of vasospasm was classified as mild(less than 25%), moderate(between 25-50%), severe(greater than 50%), and those were determined by comparing the caliber of the artery in vasospasm to that of the nearest area of apparently normal vessel. Results : The incidence of AV & DIND was 57/126(45.2%), 29/126(23.0%), and timing of DIND was 9 days(${\pm}4.1$) after initial hemorrhage. As for the location, BT was seen in 12 cases(40.0%), DT 11 cases(36.7%) and CT 7 cases (23.3%), respectively. Where as G1, BT was seen 5 cases(18.5%), DT 5 cases(18.5%) and CT 17 cases(63.0%), respectively in G2. CT AV was more correlated with DIND than LT AV(p<0.05). For distribution, type I was seen in 16 cases(59.2%), type II 4 cases(14.8%), type III 7 cases(25.9%) in G1 where as type I was seen in 7 cases(23.3%), type II 10 cases(33.3%), type III 13(43.3%) in G2. Type I AV was well correlated with DIND unlike to type II or type III(p<0.05). As for the degree, mild was seen in 4 cases(14.8%), moderate 14 cases(51.9%), severe 9 cases (33.3%) in G1, and mild 16 cases(18.5%), moderate 11 cases(36.7%) and severe 3 cases(10.0%) in G2. Moderate to severe type AV was well correlated with DIND(p<0.05). Conclusion : These results indicate that it may be possible to predict DIND according to careful analysis of location, distribution, degree of AV in patients with aneurysmal SAH.

• 한국치위생학회지
• /
• 제1권2호
• /
• pp.213-225
• /
• 2001

Objectives: This study was taken to investigate factors related to dental caries in deciduous teeth of preschool children. Methods : this study was completed by oral examination on 623 kindergarten pupils and questionnaire on their mothers in Sangju city from April 1 to May 20, 2001. Study design is Cross-sectional Study. Results: The mean values for decayed teeth indexed(dt index), filled teeth index(ft index), and decayed and filled teeth index(dft index) was 2.46, 1.85, and 4.30 respectively. 2.05 for girl was significantly lower than 2.77 of boy in gender (p<0.01). As child ren got older, values were higher(0.7 and 2.84 of three years old, 1.6 and 4.01 of four, 2.42 and 5.02 of five) in ft and dft index(p<0.001). Also, Mother age was almost same, that is, 4.12 dft value for 30~34 years was smaller than 6.17 for above forties(p<0.001). 2.07 and 4.68 for mothers who graduated from high school were higher than 1.36 and 3.34 for university in the ft and dft index(p<0.05), that is, the more they had a high educational level, the lower they got a values. Value 2.76 for children who had non cariogenic food was lower than 5.11 for those who had cariogenic food in dft index(p<0.001). In dft index, 3.82 of children who have learned the education on oral health from mother frequently have lower than 45 of children who have never learned (p<0.05). The ft value of children who had a snack food with mother(1.29) was a smaller than children had it at out of home(1.97)(p<0.05). The variables related 10 dft index were children and mothers age, educational level, and kinds of snack food (p<0.05). Conclusion : This study reveals that younger girl, younger mother, higher educational level, and non cariogenic foods showed lower dft index.

• 대한화학회지
• /
• 제38권7호
• /
• pp.509-515
• /
• 1994

고리(12C4, 15C5, 18C6, DT18C6, DA18C6) 및 비고리$(Q_2O_5)$ 폴리에테르와 11가지의 1차 및 2차 알킬암모늄 이온과의 상호작용을 NMR 적정과 전기전도도법으로 조사하였다. 모든 알킬암모늄 이온은 크라운 에테르 및 비고리 폴리에테르와 수소결합에 의해 비교적 안정한 1:1 착물을 형성하였다. 알킬암모늄 이온과 동공의 크기가 다른 동일계열 호스트와의 상호작용의 세기는 18C6 > 15C5 > 12C4 순이었으며, 알킬암모늄 이온에 대한 호스트 주개원자의 세기는 N > O > S 순이었다. 18C6는 2차 알킬암모늄 이온에 비해 1차 알킬 암모늄 이온과 더 강한 상호작용을 하는 반면, DA18C6는 2차 알킬암모늄 이온과 더 강한 상호작용을 하였다. 또한 25$^{\circ}C$ 메탄올에서 18C6와 알킬암모늄 이온과의 착물형성에 대한 안정도 상수를 전기전도도법에 의해 구하였다. 착물의 안정도는 주로 알킬암모늄의 차수(또는 수소결합 수), 알킬기의 길이, 알킬기의 구조에 의한 입체장애 등에 의해 크게 영향을 받았다.

• The Korean Journal of Ecology
• /
• 제17권3호
• /
• pp.367-378
• /
• 1994

돌피(Echinochloa crus-galli (L.) Beauv.) 종자는 산포 직후 상온에서 휴면상태로 발아가 억제되고 있으나 저장기간이 지나면서 휴면이 타파되어 7~17개월후에 16~40$^{\circ}C$의 온도에서 85~95%의 최대발아율을 나타내었다. 돌피종자가 10~70% 발아하는데 요구되는 적산온도는 539~1,279Kh (degree kelvinXhours)이며 적산온도 분포함수인 F($\theta$)=1-[3D-3($\theta$-m+D)3+1]-1/2와 일치하였고 m과 D의 값은 각각 935Kh와 555kh로 나타났다. 2$^{\circ}C$에서 냉습처리한 후, 16~40$^{\circ}C$의 항온 조건하에 4$^{\circ}C$ 간격으로 처리한 돌피종자는 최종발아율과 발아속도가 대조구에 비해 증가하였다. IT regime에 있어서는 12$^{\circ}C$부터 발아속도가 증가하여 24$^{\circ}C$에서 최종발아율이 80%가 되었으며, DT regime은 24$^{\circ}C$에서 0$^{\circ}C$로 하강하는 동안 12$^{\circ}C$에서부터 발아가 시작되었으며(발아율 10%), 8$^{\circ}C$에서 20%의 최종발아율을 나타내었고 4$^{\circ}C$부터는 2차 휴면이 유도되었다. 돌피종자는 비교적 넓은 발아기능 온도범위를 가지고 있으며 개체군내의 발아시기조절에 의해 다양한 환경변화에서도 잘 적응할 수 있으며 변온과 겨울의 저온에 의해 휴면이 타파되고 봄의 기온상승과 함께 발아하는 봄발아형 종자임을 알 수 있었다.