• ETRI Journal
• /
• v.37 no.4
• /
• pp.743-751
• /
• 2015

Cloud gaming services are heavily dependent on the efficiency of real-time video streaming technology owing to the limited bandwidths of wire or wireless networks through which consecutive frame images are delivered to gamers. Video compression algorithms typically take advantage of similarities among video frame images or in a single video frame image. This paper presents a method for computing and extracting both graphics information and an object's boundary from consecutive frame images of a game application. The method will allow video compression algorithms to determine the positions and sizes of similar image blocks, which in turn, will help achieve better video compression ratios. The proposed method can be easily implemented using function call interception, a programmable graphics pipeline, and off-screen rendering. It is implemented using the most widely used Direct3D API and applied to a well-known sample application to verify its feasibility and analyze its performance. The proposed method computes various kinds of graphics information with minimal overhead.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1254-1259
• /
• 2010

In this paper, Low Computational Adaptive Expanded Block Search Motion Estimation Method is proposed. Proposed method classifies ME blocks as Average Motion Block(AMB) and Local Motion Block(LMB) according to correlation of reference frame. It could reduce the computational complexity with performing Modified Fast Search(MFS). And accuracy of MV is also increased by 4 sub-blocks on LMB and Block Expansion(BE). The experimental results show that the proposed method has better performance that increased 1.8dB than Diamond Search and 0.6dB than Full Search with 7.5 % computation of Full Search. The proposed method could be applied to video compression and Frame Rate Conversion(FRC).

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.30-37
• /
• 2012

This paper presents the performance investigation and design technology of a Line Start-up Permanent Magnet Synchronous Motor (LSPMSM) with super premium efficiency, including a design consideration and evaluation for motor start-up, key performance, and advanced finite element analysis FEA) for the design, improvement and verification, prototype build and test, design and test data comparison with a $Premium^{(R)}$ Efficient Induction Motor (PEIM). To assess the design technology, the LSPMSM prototype was built amended from a PEIM with the same frame, stator punching and rated output. Based on the prototype test, two novel design improvements and analyses have been done to eliminate noise and vibration. Additionally, the comparisons with the PEIM on the power factor, efficiency, frame size and active material consumption indicated that a significant performance improvement and active material cost reduction can be achieved by the LSPMSM.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.305-313
• /
• 2020

Telemetry system is a system that transmits status information data acquired from the aircraft to the ground station. PCM encoder needs memory to store channel information in order to generate a frame format using the acquired data. Generally, telemetry systems in large aircraft require much larger memory for the increased acquisition channel information due to the increased sensors and subsystems. However, they have difficulty to store all channel information in limited memory. In this paper, we suggests and implements an advanced PCM encoder that can efficiently manage memory by minimizing duplicated channel information. This novel PCM encoder allocates duplicated channel information to memory only once. And, sub commutation channels having different information for each minor frame are allocated to the memory by multiples of sub commutation channels. Finally, the suggested PCM encoder was proved by simulation that composed channels of various measurement cycles.

• Communications of Mathematical Education
• /
• v.21 no.1 s.29
• /
• pp.81-105
• /
• 2007

We need questions that have various answers, not one answer by just mechanical calculation, to improve students' creativity. Such questions usually require inquiry, presumption, logical inference and a variety of problem solving tactics. These questions will be even more effective when they can provide students with multiple experiences by making them engage in lots of activities. We have to make use of diverse teaching aids and tools, or teaching materials in order to get these results. This research searches for teaching materials which improve gifted students' creativity as well as the ways to utilize 4D Frame. Furthermore we intend to present the ways to put such materials and 4D frame into practical use.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.315-322
• /
• 2002

In this paper, a new temporal decomposition method is proposed. which takes into consideration not only spectral distortion but also bit rates. The interpolation functions, which are one of necessary parameters for temporal decomposition, are obtained from the training speech corpus. Since the interval between the two targets uniquely defines the interpolation function, the interpolation can be represented without additional information. The locations of the targets are determined by minimizing the bit rates while the maximum spectral distortion maintains below a given threshold. The proposed method has been applied to compressing the LSP coefficients which are widely used as a spectral parameter. The results of the simulation show that an average spectral distortion of about 1.4 dB can be achieved at an average bit rate of about 8 bits/Frame.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.2
• /
• pp.194-201
• /
• 1995

In order to make clear the resistance of bag nets, the resistance R of bag nets with wall area S designed in pyramid shape was measured in a circulating water tank with control of flow velocity v and the coefficient k in $R=kSv^2$ was investigated. The coefficient k showed no change In the nets designed in regular pyramid shape when their mouths were attached alternately to the circular and square frames, because their shape in water became a circular cone in the circular frame and equal to the cone with the exception of the vicinity of frame in the square one. On the other hand, a net designed in right pyramid shape and then attached to a rectangular frame showed an elliptic cone with the exception of the vicinity of frame in water, but produced no significant difference in value of k in comparison with that making a circular cone in water. In the nets making a circular cone in water, k was higher in nets with larger d/l, ratio of diameter d to length I of bars, and decreased as the ratio S/S_m$ of S to the area $S_m$ of net mouth was increased or as the attack angle 9 of net to the water flow was decreased. But the value of ks15m was almost constant in the region of S/S_m=1-4$ or $\theta=15-90^{\circ}$ and in creased linearly in S/S_m>4 or in $\theta<15^{\circ}$ However, these variation of k could be summarized by the equation obtained in the previous paper. That is, the coefficient $k(kg\;\cdot\;sec^2/m^4)$ of bag nets was expressed as $$k=160R_e\;^{-01}(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$ for the condition of $R_e<100$ and $$k=100(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$ for $R_e\geq100$, where $S_n$ is their total area projected to the plane perpendicular to the water flow and $R_e$ the Reynolds' number on which the representative size was taken by the value of $\lambda$ defined as $$\lambda={\frac{\pi d^2}{21\;sin\;2\varphi}$$ where If is the angle between two adjacent bars, d the diameter of bars, and 21 the mesh size. Conclusively, it is clarified that the coefficient k obtained in the previous paper agrees with the experimental results for bag nets.

• Transactions of Materials Processing
• /
• v.23 no.4
• /
• pp.206-210
• /
• 2014

The metal lead frame, a semiconductor component, has product tolerances in micro units as compared to products made with a larger size mold. Therefore, small deflections of the mold and of the press as well as the press molding process itself have a strong influence on accuracy of the product. Hence, it is necessary for the process design to consider the structural response of the mold and the press during deformation. In the current study, the mold deflection and pressure on the punch is examined using the finite element modeling (FEM) program ABAQUS. The results from the simulation were verified with the dynamic deformation measurement equipment using digital image correlation (DIC).

• ETRI Journal
• /
• v.28 no.5
• /
• pp.574-582
• /
• 2006

In this paper, a new error concealment algorithm is proposed for the H.264 standard. The algorithm consists of two processes. The first process uses a fuzzy logic method to select the size type of lost blocks. The motion vector of a lost block is calculated from the current frame, if the motion vectors of the neighboring blocks surrounding the lost block are discontinuous. Otherwise, the size type of the lost block can be determined from the preceding frame. The second process is an error concealment algorithm via a proposed adapted multiple-reference-frames selection for finding the lost motion vector. The adapted multiple-reference-frames selection is based on the motion estimation analysis of H.264 coding so that the number of searched frames can be reduced. Therefore the most accurate mode of the lost block can be determined with much less computation time in the selection of the lost motion vector. Experimental results show that the proposed algorithm achieves from 0.5 to 4.52 dB improvement when compared to the method in VM 9.0.

• Journal of Microbiology
• /
• v.39 no.4
• /
• pp.334-337
• /
• 2001

The degradative pathway of homoprotocatechuate (HPC) is the bacterial routhe wherby 3,4-dihydrox-yphenylactic acid is catabolized to pyruvate and succinate by a series of sequential reactions . The HPC is catalzed by homoprotocatechuate 2, 3-dioxygenase(HPC-2,3O) to from 5-carboxymethy1-2-hydroxy-muco semialdehyde. In this study, the hha D gene encoding. HPC, 2, 3O was Cloned from the chromo-somal DNA of Pseudomonas sp. DJ-12 and its nucleotide sequence was analyzed. The open reding frame of hpaD gene was found to be composed of 864 nucleotide pairs and to encode a poypetide with 287 amino acide residues. The deduced amino acid sequence of the HPC-2,3O from Pseudomonas. sp. DJ-12 exhibited 60~64% homology with those of the corresponding enzymes from E. coli. Salmonella enterica, and Klebsiella pneumoniae.