• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.3
• /
• pp.259-268
• /
• 2022

Molten salt consisting primarily of eutectic LiCl-KCl is currently being used in electrorefiners in the Fuel Conditioning Facility at Idaho National Laboratory. Options are currently being evaluated for storing this salt outside of the argon atmosphere hot cell. The hygroscopic nature of eutectic LiCl-KCl makes is susceptible to deliquescence in air followed by extreme corrosion of metallic cannisters. In this study, the effect of occluding the salt into a zeolite on water sorption/desorption was tested. Two zeolites were investigated: Na-Y and zeolite 4A. Na-Y was ineffective at occluding a high percentage of the salt at either 10 or 20wt% loading. Zeolite-4A was effective at occluding the salt with high efficiency at both loading levels. Weight gain in salt occluded zeolite-4A (SOZ) from water sorption at 20% relative humidity and 40℃ was 17wt% for 10% SOZ and 10wt% for 20% SOZ. In both cases, neither deliquescence nor corrosion occurred over a period of 31 days. After hydration, most of the water could be driven off by heating the hydrated salt occluded zeolite to 530℃. However, some HCl forms during dehydration due to salt hydrolysis. Over a wide range of temperatures (320-700℃) and ramp rates (5, 10, and 20℃ min^-1), HCl formation was no more than 0.6% of the Cl^- in the original salt.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.387-392
• /
• 1996

Natural zeolite/epoxy resin composites were prepared and the cure kinetics was studied by dynamic DSC analysis. With the increments of natural zeolite content, the reaction starting temperature and the exothermic peak temperature were decreased. When diglycidyl ether of bisphenol A(DGEBA)/4,4'-methylene dianiline(MDA)/malononitrile(MN, 10phr) was filled with 20phr of zeolite, DSC thermogram had one peak and when it was filled with 30phr of zeolite, a shoulder appeared on the DSC thermogram. With the filling of 40phr of zeolite, DSC thermogram was separated into two peaks and the activation energy of the first peak, $Ea_1$ was 12.30 kJ/mol and that of the second peak, $Ea_2$ was 12.70 kJ/mol.

• Journal of Environmental Science International
• /
• v.31 no.1
• /
• pp.99-102
• /
• 2022

The aim of this study was to investigate the effect of manure additives mixed with probiotics and zeolite on harmful gas production generated by pig slurry. A total of 180 crossbred pigs ([Yorkshire × Land race] × Duroc, live weight 70±3.21 kg) were allotted to a completely randomized design with 3 treatments and 3 replications (20 heads per replicate). The treatments consisted of 0% (control), 0.05% (T1), or 1% (T2) of manure additives mixed with probiotics and zeolite. Manure additives were added weekly to pig slurry pits (2 m × 4.5 m × 1.2 m) on a volumetric basis. For ammonia measured at both 10 cm and 90 cm above the pig slurry pit, a statistical significance (p<0.05) was found in probiotics and zeolite-treated manure additives at weeks 1 - 3, except for week 0. In addition, hydrogen sulfide levels measured at 10 cm above the pig slurry pit were not affected by the manure additive at weeks 0 and 1, but showed a significant statistical difference at weeks 2 and 3 (p<0.05). Therefore, supplementing pig slurry with 0.05% and 0.1% manure additives mixed with probiotics and zeolite was found to be effective in reducing environmental pollution in pig facilities.

• Korean Journal of Materials Research
• /
• v.11 no.12
• /
• pp.1009-1013
• /
• 2001

The effects of coupling agent on the interface characteristics between epoxy resin and natural zeolite were studied by SEM, optical microscope and universal testing machine (UTM). Epoxy resin as a matrix was diglycidyl ether of bisphenol A (DGEBA)/4,4'-methylene dianiline (MDA)/malononitrile (MN) system and natural zeolite as an inorganic fillet was produced in Korea. With the increment of zeolite content, tensile strength decreased and it was due to the different elastic moduli of two materials. When external stress was loaded on the composites, the stress concentrated on the weakly bonded interface and crack grew easily. To improve the interface characteristics, the surface of the natural zeolite was treated with the silane coupling agent and it was found that the tensile strength was increased. The morphology of the interface showed that the bonding characteristics were modified by coupling agent.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.443-450
• /
• 2004

We have studied the effects that inorganic zeolite powder have on structurally different copolymer [poly(propylene-co-ethylene)] and terpolymer [poly(propylene-co-ethylene-co-l-butene)] systems and the possibility of preparing suitable porous composite films. The impact strength and yield stress of the composites did not improve upon any further loading of zeolite, but the modulus increased gradually with respect to the filler loading. The experimental modulus of each of the two systems was compared with theoretical models. We performed a morphological study of the filler mixing efficiency and image analysis. The number-, weight-, and z-average air hole diameters were compared with respect to the draw ratio as well as the zeolite loading. The experimental results suggest that these two matrices can provide a new choice for preparing future multiphase polymeric porous films by stretching them unidirectionally. In particular, we suggest that a 40 wt% zeolite loading at a draw ratio of 4 is useful for porous film applications.

• Textile Coloration and Finishing
• /
• v.33 no.1
• /
• pp.24-30
• /
• 2021

In this study, PET containing 3% silver ion-exchange zeolite was mixed with cotton in a ratio of 6:4 to prepare a spun yarn to evaluate the tensile strength, absorption speed, absorption rate, antibacterial property, and the efficiency of deodorization. As a result, the following conclusions were obtained. First, it can be confirmed that silver ion exchange zeolite is evenly distributed inside and on the surface of the antimicrobial PET-SF through SEM. It was found that the tensile strength between the CVC sample mixed with silver ion zeolite PET and cotton and the normal cotton 100% sample was slightly lower in the CVC sample. Although the absorption speed and water absorption rate were measured to find out the moisture characteristics, it was confirmed that there was no significant difference. The contact angle was slightly larger in the antimicrobial CVC sample, but the time it took for the moisture to completely penetrate into the knit fabric was 0.85 seconds. In addition, it was found that out of the total mixing ratio, 40% of antibacterial PET was spun with regular cotton to produce yarn, which had an excellent bacteria reduction rate of 99.9% and a deodorization efficiency of 85%.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2005

Nitrate reduction with zero valent iron $(Fe^0)$ has been extensively studied, but the proper treatment for ammonium byproduct has not been reported yet. In groundwater, however, ammonium is regarded as contaminant species, and particularly, its acceptable level is regulated to 0.5 mg-N/L. for drinking water. This study is focused on developing new material to reduce nitrate and properly remove ammonium by-products. A new material, Fe-loaded zeolite, is derived from zeolite modified by Fe(II) chloride followed by reduction with sodium borohydride. Batch experiments were performed without buffer at two different pH to evaluate the removal efficiency of Fe-loaded zeolite. After 80 hr reaction time, Fe loaded zeolite showed about $60\%$ nitrate removal at initial pH of 3.3 and $40\%$ at pH of 6 with no ammonium release. Although iron filing showed higher removal efficiency than Fe-loaded zeolite at each pH, it released a considerable amount of ammonium stoichiometrically equivalent to that of reduced nitrate. In terms of nitrogen species including $NO_3-N$ and $NH_4^+-N$, Fe-loaded zeolite removed about $60\%\;and\;40\%$ of nitrogen in residual solution at initial pH of 3.3 and 6, respectively, while the removal efficiency of iron filing was negligible.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.506-513
• /
• 2020

In this study, the mechanical properties, absorption, and reduction performance of NOx in the mortar containing mineral admixture like zeolite and active hwangtoh were evaluated. Zeolite and active hwangtoh were used as binder, and zeolite and active hwangtoh were substituted for cement. The substitution ratio of two types of mineral admixtures was considered as 20 and 30% respectively. As a result of evaluating the compressive strength and flexural strength of each mortar specimen, the highest strength in the plain mixture was evaluated. As the substitution ratio of zeolite and active hwangtoh increased, the compressive and flexural strength decreased. In addition, the difference of compressive and flexural strength between active hwangtoh and zeolite mixing was evaluated to be insignificant. To evaluate the absorption rate, the mixture was designed to lower the W/B ratio of the existing mixture and set the substitution ratio of active hwangtoh and zeolite at 25%. The highest absorption ratio in the mortar with zeolite was evaluated, and the difference in absorption ratio between the remaining two mortar mixtures was small. The assessment of reduction performance of NOx considering the application of photocatalyst showed a clearly decreasing reduction behavior, even if they were the same mortar mixture. Zeolite and active hwangtoh also showed a higher NOx reduction than the Plain mixture, because of their porosity properties. In the case of active hwangtoh, the absorption ratio was lower than that of zeolite mixture, but the reduction of NOx performance was better than the result of zeolite mixture.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.4
• /
• pp.306-312
• /
• 2014

This study was carried out to develop high-performance feed using selenium-sorbed $Ca^{2+}$-exchanged zeolite A. The contents of Se increased with increasing reaction temperature and the content of $Ca^{2+}$ ions in $Ca^{2+}$-exchanged zeolite A. A synthesized high-performance feed (0.306 ppm) was applied to poultry farming for 4 and 7 weeks, respectively. Se contents in chicken meats and eggs were 18.8, 27.2, and 94.1 ppb and 73.7, 14.9, and 64.5 ppb for control (retail chicken meats), 4, and 7 weeks, respectively; Ca contents were 3.8, 9.9, and 11.9 ppm and 48.6, 48.3, and 53.6 ppm, respectively. In conclusion, Se and Ca contents in chicken meats increased as feeding periods increased, but significant differences were not observed in the eggs.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.3
• /
• pp.218-222
• /
• 2000

Wasted${\cdot}$rested mine areas give lots of effect on around-environmental changes after mining development. Leaching water at reclaimed land has been eluted from the solid components through physical, chemical, biological procedures by waters percolated through reclaimed site. The element analysis of waste tungsten ore tailing, leaching water analysis and removal of heavy metal by zeolite were performed to investigate the influent of acid rain on the released contents of H. M. The heavy metal contents in leaching water were determined to be As $1.21\;{\sim}\;1.54\;ppm$, Pb $0.11\;{\sim}\;0.15\;ppm$ and $SO_4\;^{2-}$ was $302\;{\sim}\;378ppm$. As deionized water and simulated acid rain (pH 3,4) were percolated through columns packed tungsten ore tailing, the amount of Mn, Na, Ca which were dissolved by pH4 solution was higher than those by distilled water. However, W and Mo were eluted easily by high pH solution. The change of heavy metal concentration by column experiment packed zeolite was effective a little because heavy metals were adsorved much more by zeolite.