• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1-5
• /
• 2010

The Hyundai Rotem company is due to be conducted the main line Speed Qualification Test as regulated by CFR for SEPTA EMU and SCRRA Bi-level coach project. The regulated test items per 49CFR213.345 are wheel/rail interaction forces and carbody/truck accelerations during running on main line. Therefore the special two sets of instrumented wheelset (IWS) per each project have been made for measuring the interaction forces between wheel and rail at four wheels of one truck during running on main line. In this paper, regarding Speed Qualification Test, the required test items and data analysis method per 49CFR213.345 and the preparation status of instrumented wheelsets (IWS) are introduced.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.1109-1112
• /
• 2017

The precise prediction of radiation embrittlement of aged reactor pressure vessels (RPVs) is a prerequisite for the long-term operation of nuclear power plants beyond their original design life. The expiration of the operation licenses for Korean reactors the RPVs of which are made from SA533B-1 plates and welds is imminent. Korean regulatory rules have adopted the US Nuclear Regulatory Commission's transition temperature shift (TTS) models to the prediction of the embrittlement of Korean reactor pressure vessels. The applicability of the TTS model to predict the embrittlement of Korean RPVs made of SA533B-1 plates and welds was investigated in this study. It was concluded that the TTS model of 10 CFR 50.61a matched the trends of the radiation embrittlement in the SA533B-1 plates and welds better than did that of Regulatory Guide (RG) 1.99 Rev. 2. This is attributed to the fact that the prediction performance of 10 CFR 50.61a was enhanced by considering the difference in radiation embrittlement sensitivity among the different types of RPV materials.

• 자동차안전학회지
• /
• 제7권4호
• /
• pp.31-38
• /
• 2015

In the United States, when NHTSA initiates the vehicle defect investigation, the most of automotive manufactures voluntary start their vehicle's recall campaign immediately. However, in the domestic market, NGOs, medias and even the National Assembly complaint the attitude of domestic and foreign makers tendencies of retardation of recall campaign. Also there were criticism for the manufacturer's concealing or downsize of their vehicle defects to the publics. In general, the manufactures may wait until MLIT's decision to recall orders. Therefore, in this study, from the survey of foreign countries legal recall systems and it is recommended reinforcement of the current vehicle management law to promote more frequent voluntary recall campaign from makers. In this study, it is also includes summarize all previous recall related research works and proposes the more stringent regulations to punish of concealing or downsize their vehicle safety defects.

• Journal of Radiation Protection and Research
• /
• 제26권3호
• /
• pp.225-229
• /
• 2001

In Korea, an advanced reactor system of 330MWt power called SMART (System integrated Modular Advanced ReacTor) is being developed by KAERI to supply energy for seawater desalination as well as electricity generation. A shielding design of the SMART core with 49 CEDM is established by a two-dimensional discrete ordinates radiation transport analyses. The DORT two-dimensional discrete ordinates transport code is used to evaluate the SMART shielding designs. Three axial regions represent the SMART reactor assembly, each of which is modeled in the R-Z geometry. The BUGLE-96 library is used in the analyses, which consists of 47 neutron and 20 gamma energy groups. The results indicate that the maximum neutron fluence at the bottom of reactor vessel is $5.89 {\times} 10^{17}\;n/cm^2$ and that on the radial surface of reactor vessel is $4.49 {\times} 10^[16}\;n/cm^2$. These results meet the requirement, $1.0 {\times} 10^{20}\;n/cm^2$, in 10 CFR 50.61 and the integrity of SMART reactor vessel during the lifetime of the reactor is confirmed.

• 무역상무연구
• /
• 제49권
• /
• pp.3-41
• /
• 2011

In this article, the author have studied on main revisions and some recommendations of the Incoterms(R) 2010. Main revisions are as belows. 1. Two new Incoterms rules -DAT and DAP- have replaced the Incoterms 2000 rules DAF, DES, DEQ and DDU. 2. New classification of the Incoterms(R) 2010 are adopted. First class is Rules for any mode or modes of transport(EXW, FCA, CPT, CIP, DAT, DAP and DDP belong to this class.) and second class is rules for sea and inland waterway transport(FAS, FOB, CFR and CIF belong to this class.). 3. Incoterms(R) 2010 rules formally recognizes that they are available for application to both international and domestic sale contracts. 4. The Guidance Notes and Introduction are not part of the actual Incoterms(R) 2010 rules. 5. Under the FOB, CFR and CIF, all mention of the ship's rail as the point of delivery has been omitted in preference for the goods being delivered when they are "on board" the vessel. 6. Incoterms(R) 2010 rules include the obligation to 'procure goods shipped' as an alternative to the obligation to ship goods in the relevant Incoterms rules. 7. Incoterms(R) 2010 rules give electronic means of communication the same effect as paper communication. 8. Incoterms(R) 2010 rules have allocated obligations between the buyer and seller to obtain or to render assistance in obtaining security-related clearances. such as chain-of custody information. Some recommendations are as belows. 1. The parties must incorporate the Incoterms(R) 2010 rules into their contract of sale. 2. The parties must choose the appropriate Incoterms(R) 2010 rules. 3. Specify the place or port as precisely as possible in their contract of sale. 4. Remember that Incoterms(R) 2010 rules do not give the parties a complete contract of sale. 5. Incoterms(R) 2010 rules do not prohibit alteration of Incoterms rule, but there are dangers in so doings. In order to avoid any unwelcome surprises, the parties would need to make the intended effect of such alterations extremely clear in their contract.

• 한국가스학회지
• /
• 제18권5호
• /
• pp.12-19
• /
• 2014

매설배관의 부식위험성을 최소화하고 음극방식의 효율극대화를 위해 다양한 비굴착 간접검사기법들이 수십년 전부터 이용되고 있으며, 미국에서는 굴착을 통한 매설배관 외면부식 직접평가법을 CFR 코드에서 규정하고 있다. 국내의 경우에는 도시가스사업법 관련 4개의 기준(KGS Code)에서 배관의 손상여부를 측정할 수 있는 장비를 이용하여 배관의 상태를 점검, 측정하고 이상부위에 대하여 누출검사를 한 경우 매설배관의 기밀시험을 한 것으로 보고 있을 뿐 배관외면부식 직접평가에 대한 규정은 없다. 본 논문에서는 미국, 영국 등 국외의 매설배관 건전성 관리 기준 및 방법을 조사하고, 국내의 매설배관 방식관리 실태 및 피복손상탐지 장치 이용실태 등을 조사한 후 국내 실정에 맞는 매설배관 외면부식 직접평가법을 제시하였다. 본 논문에서 제시한 매설배관 외면부식 직접 평가법은 국내에서 중압배관의 정밀안전진단 제도를 도입하는데 기초 자료로 활용되었다.

• 한국압력기기공학회 논문집
• /
• 제20권1호
• /
• pp.7-15
• /
• 2024

Environmental qualification is required for safety related electrical equipment under harsh environments located in nuclear power plants according to 10 CFR 50.49 and RG 1.89. As analog technology has recently been replaced by digital technology, NRC established RG 1.209 as a regulatory guideline for environmental qualification of safety related computer-based I&C system located in mild environments, requiring evaluation for electromagnetic compatibility, smoke exposure and type test for actual service conditions such as temperature and humidity. In this paper, the trend of environmental qualification for digital equipment is analyzed by comparing the environmental qualification requirements between digital and analog equipment.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.843-850
• /
• 2020

본 연구의 목적은 국내 위험물 운송용 탱크화차의 충돌안전설계 가이드라인 제안을 위해 해외 충돌안전 기준에 따른 국내 위험물 운송화차에 대하여 비선형 충돌해석을 하여 위험성을 평가하고, 구조적 취약부를 분석하는데 있다. 유럽의 EN 12663-2에서 규정하는 화차의 완충시험 및 북미 49CFR179에서 규정하는 탱크 펑크시험기준을 분석하였으며, 상용 유한요소 해석 솔버인 LS-DYNA를 이용하여 각각 기준에 따른 비선형 유한요소모델을 모델링하였다. EN 규격의 완충시험 해석결과 충돌속도 6 km/h 이하에서는 소성변형이 발생하지 않을 것으로 예측하였지만, 8 km/h 이상의 충돌속도에서 중앙연결기를 통한 하중 전달으로 차체의 센터실 후방 및 탱크 중앙 지지부에서 소성변형을 확인하였다. 북미 법규의 탱크 펑크시험 해석결과 국내 탱크화차는 두부 충돌모드에서 충돌차량의 운동에너지를 4 % 이상 흡수시 두부의 코너부에서 탱크 외벽의 파괴가 발생하였으며, 측면 충돌모드에서 운동에너지 30 % 이상 흡수시에 충격체가 접촉하는 탱크 외벽의 파괴가 발생하여 내부 적재물의 누출을 예상하였다. 국내 유류 운송용 탱크화차의 해외 충돌안전 기준의 만족을 위해서는 차체 구조보강 설계 및 탱크 방호설계 수준을 향상시킬 필요가 있다.

• 정보와 통신
• /
• 제32권11호
• /
• pp.41-49
• /
• 2015

현대 사회는 스마트폰 사용량의 급증으로 인한 모바일 트래픽의 폭발적인 증가와 IoT(Internet of Things)를 비롯한 융복합 유무선 서비스의 확대 등으로 국가적으로 한정적 자원인 주파수의 효율적 사용을 인한 대책 마련이 시급한 실정이다. 이에 미국 및 유럽을 중심으로 다양한 용도의 무선기기들이 한정적 주파수 대역을 효율적으로 이용하기 위한 방안으로 주파수 공동사용에 대한 정책도입 및 연구개발이 지속적으로 추진되고 있다. 본 고에서는 수요 대비 공급 부족 현상이 점차 심각해 지고 있는 한정적 주파수 자원의 효율적 이용을 위한 대안으로 급부상하고 있는 주파수 공동사용 기술에 대한 국내외 관련 정책 및 기술추진 현황에 대해 소개하고자 한다. 특히 본 고에서는 2010년 국가광대역계획(NBP, National Broadband Plan) 발표를 시작으로 전 세계적으로 주파수 공동사용 추진에 있어 가장 적극적인 행보를 보여주고 있는 미국에서의 3.5GHz 대역 주파수 공동사용을 위한 전파규칙인 CFR(Code of Federal Regulation) Part 96의 주요 내용을 자세히 소개하고자 한다. 본 고의 II장에서는 국내외에서 진행되고 있는 대표적인 주파수 공동사용 정책추진 현황에 대해 소개하였으며, III장에서는 올해 4월 최종 전파규칙이 발표된 미국의 SAS(Spectrum Access System) 기반 주파수 공동사용 전파규칙에 대해 소개하였다. 또한 IV장에서는 SAS 기반의 주파수 공동사용 기법 및 기존에 개발되고 있는 다양한 동적 스펙트럼 접속 기법들을 미국 내 주요 도심지역에 적용하기 위한 대규모 테스트베드 프로그램인'Model City'프로그램 소개 및 결론을 통하여 주파수 공동사용 도입의 당위성을 설명하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.199-200
• /
• 2019

Although accidents in the domestic construction industry have been decreased gradually, deaths in the construction sites have been occupied 49.9 percent of the total industry and deaths from fall accident have been accounted for 59.7 percent of the construction industry. In order to prevent fall accident, Occupation Safety and Health Act(OSHA) was enacted for setting management standards and detailed regulations was designed by the Ministry of Employment and Labor. Although government has been pushed for companies and workers to comply the regulations, currently, many domestic construction sites have been violated. On the other hand, in safety-advanced countries such as the United States, Japan, and the EU, industrial accidents have been decreased due to continual application of adapted safety policies according to characteristic in each country. Therefore, it is necessary to analyze laws and polices of advanced countries and apply them to domestic construction sites in order to reduce fall accidents. Therefore, the objective of this study is to compare domestic laws related fall accident with advanced countries laws. In the future, the results of this study will be utilized as a reference to reinforce Occupation Safety and Health Act(OSHA).