• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.3-6
• /
• 2007

In this paper, a hybrid dual band LNA(Low Noise Amplifier) with a tunable matching circuit using varactor is designed for 433MHz and 912MHz RFID reader. The operating frequency is controlled by the bias voltage applied to the varactor. The measured results demonstrate that S21 parameter is 16.01dB and 10.72dB at 433MHz and 912MHz, respectively with a power consumption of 19.36mW. The S11 are -11.88dB and -3.31dB, the S22 are -11.18dB and -15.02dB at the same frequencies. The measured NF (Noise Figure) is 15.96dB and 7.21dB at 433MHz and 912MHz, respectively. The NF had poorer performance than the simulation results. The reason for this discrepancy was thought that the input matching is not performed exactly and a varactor in the input matching circuit degrades the NF characteristics.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.157-158
• /
• 2008

In this paper, a dual band microstrip patch Antenna is designed for RFID Application. The antenna shows a good performance at the frequencys, 433MHz and 2.45GHz for the radiation characteristics and input impedance matching as well. The reflection factor is lower than 15dB and a good directivity higher than 3dB is achieved for both frequency.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.167-168
• /
• 2023

본 논문에서는 저전력 433MHz 주파수 RF 신호가 여러 종류의 벽을 투과할 시 신호에 일어나는 감쇠를 비교한다. 국내에서 기존의 와이파이, 블루투스 같은 고주파수 대역의 RF 신호에 관한 연구 및 실험은 많이 행해지었지만, 한국의 전파 관리법에 의해 성능이 제한된 비면허 주파수인 433MHz 대역의 RF 신호에 관한 연구는 매우 적게 이루어져 있다. 이러한 저주파수 대역 신호의 가장 큰 장점은 장거리 통신에 능하고 벽 투과특성이 뛰어나다는 것이다. 본 논문에서는 실험을 통해 433MHz 대역 RF 신호가 여러 종류의 장애물을 통과 시 신호 세기가 어떻게 변하는지 각각 비교하고 이를 통해 비가시 영역에서 저전력 주파수 통신의 사용 가능성을 확인한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.135-140
• /
• 2008

In this paper, the spiral antenna with the center frequencies of 315MHz, 433MHz, and 447MHz for RKE system of a vehicle is designed on PCB. The antenna is microstrip line-fed, and applied PIFA concept near the feeding part to easily tune center frequency and input impedance. The PIFA-type spiral antenna with the size of $30mm{\times}20mm$ is designed on printed PCB by considering the effect of circuits and components on PCB, ECU case and vehicle body. Also chip inductor inserted dual-band spiral antenna of 315MHz and 447MHz is designed. We found that the antenna designed on PCB satisfied the antenna specifications through measurement and field test.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.768-773
• /
• 2010

In this paper, we study on an optimal design of a triple-band PIFA (Planar Inverted-F Antenna) of 433 MHz, 912 MHz and 2.45 GHz by using evolution strategy. Generally, the resonant frequency of the PIFA is determined by the width and length of a U-type slot used. However the resonant frequencies of the multiple U slots are varied by the mutual effect of the slots. Thus the optimal width and length of U-type slots are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonant frequencies of initial model are 439.5 MHz, 981.5 MHz and 2.563 GHz. However, the resonant frequencies of the triple-band PIFA yielded by the optimal design program are 430.5 MHz, 907 MHz and 2.4515 GHz. Measured resonant frequencies are 433.5 MHz, 905.5 MHz and 2.454GHz, which show a good agreement with the simulation results.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.264-265
• /
• 2007

In this paper, we deal with a hybrid dual band low noise amplifier with tunable matching circuits for a Radio Frequency Identification(RFID) reader operating at 433MHz and 912MHz. The tunable matching circuit consists of the microstrip line, SMD component and varactor. Simulation results show that the S21 parameter is 17dB and 7.91dB at 433MHz and 912MHz, respectively. The noise figure is also determined to 3.56dB and 5.58dB at the same frequencies with a power consumption of 19.36mW.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.869-876
• /
• 2001

In modern wireless communication, it has been regarded as a important problem for the spectrum efficiency to utilize the limited frequency-resource efficiently. In addition, the system architecture has been designed for low cost, low power consumption and ultra-lightweight. In this paper, we directly modulated the BCPFSK with a superior spectrum efficiency using the DDS and applied the direct conversion to the system architecture. Finally, we designed a transceiver which has the 433 MHz BCPFSK output and evaluated the system performance. In the measured result, we know that as for spectrum and the power efficiency, BCPFSK method is better than conventional one. Also, the results of the designed system is 433.92 MHz in center frequency and about 33 dBc in carrier suppression ratio. And we get the better results in local oscillator leakage and the spurious of the ISM out-band the same as -69dBc and under 60dBc.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.97-100
• /
• 2005

An orthogonal antenna is presented for reader application of radio frequency identification (RFID) at 433 MHz. Two 1x2 sub-arrays are orthogonally placed on a ground plane and two different feeding networks are applied to control horizontal and vertical radiation current flows for each sub-array, respectively. Inverted-F structures are used as radiation elements and can generate two linear polarizations by relative current distribution of radiators forming sub-arrays. Antenna gains are 2.7 and 0.4 dBi and isolation between two input ports is less than 25dB.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.343-346
• /
• 2005

유비쿼터스 시대의 도래로 인해 많은 IT업체는 유비쿼터스 핵심기술을 기반으로 발전하고 있다. 이러한 유비쿼터스 핵심기술의 상당부분은 무선통신기술 RF를 이용한 것이며 이를 활용하여 RFID 시스템 및 Ubiquitous Sensor Network 등을 구축할 수 있다. 본 논문에서는 이에 적합한 400/800MHz ISM/SRD 밴드대역을 사용하는 무선 트렌시버 단일 칩인 CC1020을 이용하여 하드웨어를 구성 하였다. CC1020칩을 사용하면 저전력, 고감도, 적은 주변회로 구성 등 많은 이점이 있으며 주파수원 고정과 필터링 및 전원공급상태 그리고 PC와의 interface등의 하드웨어를 쉽게 구현할 수 있다. 따라서 이러한 각 주변회로 구성에 대해 설명하고 실제 구현을 통해 DATA의 송수신실험을 통해 하드웨어의 특성을 확인 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.721-724
• /
• 2005

미국, 유럽에서는 315MHz, 433.92MHz를 아마추어 무선국과 공유하여 차량용 주파수로 활용하고 있다. 참고로, 미국 고속도로 안전위원회는 TPMS(Tire Pressure Monitoring System)를 2003${\sim}$2006년 까지 미국 내 생산 차량 및 수입차량에 대해 TPMS 센서 장착을 100% 의무 적용하고 있다. 433.92MHz는 국내에서 이미 아마추어 무선 업무용 주파수로 할당되어 사용되고 있으며, 현재 TPMS 수입차량의 국내 도입을 위한 주파수 분배 및 기술 기준이 마련되어 있지 않은 상황이다. 향후 해외 수입차량의 국내 도입 및 국내 차량의 해외 수출을 고려할 경우 국제 기준에 부합하면서 국내 전파환경에 적합한 주파수 분배 및 기술 기준의 마련이 필요하다.