• The Korea Journal of Herbology
• /
• v.23 no.3
• /
• pp.27-32
• /
• 2008

Objectives : In this paper, we describe that $^1H-NMR$ spectroscopy may be superior to the conventional HPLC for the quantitative analysis of hesperidin from Citrus unshiu. Methods : $^1H-NMR$ spectra (400 MHz) were recorded in $DMSO-d_6$ using a Varian UNITY Inova AS 400 FT NMR spectrometer. One hundred milligram of powdered Citrus unshiu was weighed out and mixed with 1 ml of $DMSO-d_6$ with sonication for 30 min (room temperature). The extracts were filtrated through a 0.45 ${\mu}m$ PVDF filter and 0.5 ml of filtrated extract used for quantitative $^1H-NMR$ measurement (added 1 mg of dimethyl terephthalate as internal standard). The quantity of hesperidin was calculated by the ratio of the intensity of the compound to the known amount of internal standard. For HPLC analysis, the half gram of plant material was extracted with 60 ml of MeOH for 2 hours. The extracts were made 100 ml volume and analyzed by a Waters HPLC system using a YMC ODS column. The total flow rate was 1.0 ml/min with a sample volume 10 ${\mu}l$ and UV detection at 280nm. Results : The contents of hesperidin in Citrus unshiu was determined $5.33{\pm}0.06$% in the quantitative $^1H-NMR$ method and $5.15{\pm}0.12%$ in HPLC method. Using the quantitative $^1H-NMR$ the contents of hesperidin can be determined in much shorter time than the conventional HPLC measurements. Conclusions : From those results, the advantages of quantitative $^1H-NMR$ analysis are that can be analyzed to identify and quantify, and no reference compounds required for calibration curve. Besides, it allows rapid and simple quantification for hesperidin with an analysis time for only 10 min without any pre-purification steps.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.145-150
• /
• 2002

본 연구는 국내에서의 지역별 풍력자원을 조사하여 자연에너지인 풍력을 활용하고자 기상청의 기상 관측소 자료를 이용하여 분석하였던 바, 다음과 같이 요약 할 수 있다. 가. 평균풍속의 분포를 보면 제주고층이 10.8m/s로 가장 높았고, 순천이 0.6m/s로 가장적게 나타난 것으로 일반적으로 해안가나 내륙고산지대에서 높은 풍속을 보였다. 나. 풍속지속시간을 보면 대부분의 지역에서 3.0m/s 이상, 연간 5,000시간이상으로 나타나 풍력의 이용가능성을 알 수 있었다. 다. 풍력 에너지 밀도는 인천 142kWh/m$^3$, 제주도 400kWh/m$^3$, 대관령 280kWh/m$^3$, 울릉도 140kWh/m$^3$, 목포 200kWh/m$^3$및 군산 180kWh/m$^3$높게 나타났다.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.686-693
• /
• 1992

In order to investigate the mechanism of dissolutin of nickel from a matte composed essentially of heazlewoodite and ferronickel, the leaching in an aqueous solution of hydrochloric was carried out at $50-90^{\circ}C$, 0.5-3.ON HCl, and with the particle sizes between $100-160{\mu}m$ and $400-500{\mu}m$. The leaching rate of heazlewoodite was much rapider than that of ferronickel, and the two components were simultaneously dissolved with different reaction rates. Within the experimental range, NiS, an intermediate, was not formed. However a possibility to form a thin layer of NiS on particle surface upon saturating the reaction mixture with $H_2S$ was not excluded. At the initial stage, the activation energy was about 10 kcal/g mol. The reaction occurred at the particle surface, and consequently the particle size decreased with time. The rate of dissoultion for nickel was linearly proportional to the concentration of HCl up to 1.0N.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.55-62
• /
• 2017

A Lahar on the volcanic area is one of the important hazard that can cause the loss of life and property damage. In order to estimate lahar hazard area at Ulleung Island, we simulated lahar inundation area using Laharz_py. We assumed 400 m of additional elevation for DEM to draw proximal hazard zone of Ulleung Island that H/L ratio were selected 0.45 and 0.5. And lahar volumes for simulation were estimated to 30,000, 50,000, 70,000, $100,000m^3$, respectively. In the results, 5 streams are located near a proximal hazard zone, Jeodong (east), Sadong and Okchon (southeast), Namyang (southwest), and Chusan (north), Nari basin is also considered that has a possibility of lahar during downpour. The results of this study can be used as basic data to make a hazard map for reduce the damage that can be caused by volcanic hazards occurred on Ulleung Island.

• Microbiology and Biotechnology Letters
• /
• v.16 no.2
• /
• pp.163-167
• /
• 1988

The conditions for the protoplast fusion of auxotrophic mutants of Penicillium verruculosum were determined. A preparation of commercial enzyme Novozym 234 was used to successfully isolate protoplast from the 20hr old mycelium of P. verruculosum. Under optimal condition, the protoplast yield ranged from 2.4$\times$10$^7$ to 3.0$\times$10$^7$ protoplasts from 400mg of damp mycelia of various auxotrophic mutant strains. The regeneration frequency ranged from 26.6 to 42.4% and the spontaneous reversion frequency of the protoplasts on the regeneration minimal medium was less than 10$^7$. The optimal concentration of PEG 6000 was 20%, and exposure of protoplasts to PEG for 10 min was found to be sufficient for protoplast fusion. Optimal pH of fusion mixture was deter-mined as 5.5 and l0mM of calcium chloride in fusion mixture effectively enhanced the protoplast fusion frequency. Under optimal condition, the fusion frequency between various auxotrophs ranged from 1.8$\times$10$^{-3}$ to 3.5$\times$0$^{-3}$.

• Microbiology and Biotechnology Letters
• /
• v.42 no.4
• /
• pp.339-346
• /
• 2014

A bacterial strain was isolated from homemade doenjang (Korean fermented soybean paste) as a producer of the extracellular ${\beta}$-galactosidase, capable of hydrolyzing lactose to liberate galactose and glucose residues. The isolate YB-1414 has been identified as Bacillus licheniformis on the basis of its 16S rDNA sequence, morphology and biochemical properties. The production of ${\beta}$-galactosidase by B. licheniformis YB-1414 reached maximum levels of 6.2 U/ml in culture medium containing wheat bran (1%) and yeast extract (2.5%) as carbon and nitrogen sources, respectively. Particularly, the insoluble fraction was more effective for ${\beta}$-galactosidase production than the soluble extract of wheat bran. The enzyme exhibited maximum activity for hydrolysis of para-nitrophenyl-${\beta}$-D-galactopyranoside (pNP-${\beta}Gal$) under reaction conditions of pH 6.0 and $55-60^{\circ}C$. Its hydrolyzing activity for pNP-${\beta}Gal$ was drastically decreased by the addition of low concentrations of galactose, but only slightly decreased by glucose, with 85% of maximal activity in the presence of 400 mM glucose.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.297-300
• /
• 1988

Ammonium p-methylbenzenesulfonate, $C_7H_11NO_3S$, Mr = 189.23, orthorhombic, space group $Pna2-1$, a = 20.406(4), b = 6.271(1), c = 7.067(2)${\AA}$, V = 904.19 ${\AA}^3$, Z = 4, $D_x$ = 1.39, $D_m =1.38g{\cdot}cm^{-3}$, ${\lambda}(M_o K_{\alpha})$ = 0. 71069 ${\AA}$, ${\mu}=3.1 cm^{-1}$, T = 298K, F(000) = 400, final R = 0.057 for 994 unique observed reflections with I > $16{\sigma}(I)$. The methylbenzene portion including the sulfur atom is nearly planar. Between the $SO_3$ groups and the ammonium ion, there are three unique hydrogen bonds; two of which make the anions linked along the c-axis and the remaining one along the b-axis. These hydrogen bonds make two-dimensionally hydrogen-bonded molecular layers. Among these hydrophilic layers, the methylbenzene moieties cluster together to form hydrophobic layers.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.615-620
• /
• 1996

Chromium-Molybdenum steel was plasma-nitrided at 823 K for 10.8 ks in an atmosphere of 30% $N_2$-70% $H_2$ gas under 665 Pa without and with a subsidiary cathode of $MoS_2$ to compare ion-nitriding and plasma-sulfnitriding using subsidiary cathode. When the steel was ion-nitrided without $MoS_2$, iron nitride layer of 4$\mu\textrm{m}$ and nitrogen diffusion layer of 400mm were formed on the steel. A compound layer of 15$\mu\textrm{m}$ and nitrogen diffusion layer of 400$\mu\textrm{m}$ were formed on the surface of the steel plasma-sulfnitrided with subsidiary cathode of $MoS_2$. The compound layer consisted of FeS containing Mo and iron nitrides. The nitrides of $\varepsilon$-$Fe_2$, $_3N$ and $\gamma$-$Fe_4N$ formed under the FeS. The thicker compound layer was formed by plasma-sulfnitriding than ion-nitriding. In plasma-sulfnitriding, the surface hardness was about 730 Hv. The surface hardness of the steel plasma-sulfnitrided with $MoS_2$ was lower than that of ion-nitrided without $MoS_2$. This may be due to the soft FeS layer formed on the surface of the plasma-sulfnitrided steel.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.165-165
• /
• 2010

AZO:H films were prepared by RF magnetron sputtering system with a AZO (2wt% $Al_2O_3$) ceramic target at a temperature of $150^{\circ}C$. The annealing treatments were carried out in hydrogen ambient for 1hr at a temperature of $400^{\circ}C$. The AZO:H films were etched with 1 % HCl. The influence of the properties of AZO:H films deposited in various working pressures is investigated. As a result, the AZO:H film deposited in 4mTorr showed excellent electrical property of $\rho=5.036{\times}10^{-4}{\Omega}cm$ and strongly oriented (002) peak. The transmittance in the wavelength of 450nm was above 80%. It can be used as front electrode for increasing efficiency of GaN LED.

• Journal of Powder Materials
• /
• v.18 no.3
• /
• pp.244-249
• /
• 2011

Spherical nanosized cobalt powder with an average size of 150-400 nm was successfully prepared at room temperature from cobalt sulfate heptahydrate ($CoSO_4{\cdot}7H_2O$). Wet chemical reduction method was adopted to synthesize nano cobalt powder and hypophosphorous acid ($H_3PO_2$) was used as reduction agent. Both the HCP and the FCC Co phase were developed while $CoSO_4{\cdot}7H_2O$ concentration ranged from 0.7 M to 1.1 M. Secondary phase such as $Co(OH)_2$ and $CO_3O_4$ were also observed. Peaks for the crystalline Co phase having HCP and FCC structure crystallized as increasing the concentration of $H_3PO_2$, indicating that the amount of reduction agent was enough to reduce $Co(OH)_2$. Consequently, a homogeneous Co phase could be developed without second phase when the $H_3PO_2/CoSO_4{\cdot}7H_2O$ ratio exceeded 7.