• 제목/요약/키워드: 4-PBA

검색결과 47건 처리시간 0.021초

P(VDF/TrFE)/PBA 블렌드의 스피노달 상분리 및 상용해가 결정화거동에 미치는 영향 (Effect of Spinodal Phase Separation and Phase Dissolution on a Succeeding Crystallization in P(VDF/TrFE)/PBA Blends)

  • 김갑진;이종순
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.207-210
    • /
    • 2002
  • PVDF는 측쇄에 C=O기를 갖는 고분자인 PMMA와 PVAc와의 블렌드 및 주쇄에 C=O기를 갖는 poly(1,4-butylene adipate) (PBA)와의 블렌드에서 PVDF의 융점보다 상당히 높은 온도에서 LCST거동을 보이고 있음이 알려져 있다. 그런데 PVDF/PMMA와 PVDF/PVAC 블렌드계에서는 LCST가 고분자의 열분해온도와 유사하여 LCST거동을 실험적으로 관찰하기 어려웠다. 그런데 PVDF/PBA 블렌드계에서는 실험적으로 측정할 수 있을 정도로 LCST가 낮아지긴 하였지만 PBA의 열분해를 완전히 배제하기엔 아직도 높은 온도이다.[1] (중략)

  • PDF

Imaging the Enzymatic Reaction of Urease Using Liquid Crystal-Based pH Sensor

  • Hu, Qiong-Zheng;Jang, Chang-Hyun
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권12호
    • /
    • pp.4377-4381
    • /
    • 2011
  • In this study, real-time and label-free methods for monitoring the enzymatic reaction of urease, which releases ammonia through the hydrolysis of urea in an aqueous solution, were developed using a liquid crystal (LC)-based pH sensor. Nematic liquid crystal 4-cyano-4'-pentylbiphenyl (5CB), doped with 4'-pentyl-biphenyl-4-carboxylic acid (PBA), exhibited a shift in optical appearance from bright to dark when it was in contact with ammonia generated from the enzymatic reaction between urease and urea. This optical change was attributed to the anchoring transitions of LCs caused by hydrophobic interactions between the tails of deprotonted PBA ($PBA^-$) molecules and the LCs at the aqueous/LC interface. This novel technique holds great promise for the sensitive detection of urease along with its substrates and inhibitors.

요중 3-phenoxybenzoic acid 미량 분석 및 pyrethroid계 살포자 노출 평가 (Determination of 3-phenoxybenzoic Acid in Urine and Exposure Assessment of Pyrethroid Insecticides to Human Being)

  • 서종철;송재석;최홍순
    • 농약과학회지
    • /
    • 제11권2호
    • /
    • pp.87-94
    • /
    • 2007
  • 본 연구는 Pyrethroid계 살충제인 deltamethrin의 작업자 노출을 평가하기 위해 약제살포 환경의 공기중 농도분석과 아울러 인체내에 흡수되어 요중으로 대사되는 산물인 3-PBA의 최적 분석법을 확립하였고, deltamethrin과 3-PBA간의 상관성을 분석하였다. 3-PBA의 가수분해 최적 조건은 시료에 HCl을 첨가하여 pH1 로 조절한 후 $90^{\circ}C$에서 60분 동안 반응시켰을 때 이었다. 요 시료는 Amberlite XAD-16에 흡착시킨 후 acetone을 0.1 mL $min^{-1}$의 속도로 3mL에서 최고의 회수율을 나타내었다. 공기중 deltamethrin의 농도는 N.D. ${\sim}0.00079\;mg\;m^{-3}$이었고, 요중 3-PBA 농도는 $467.5{\pm}2.4\;{\mu}g\;g^{-1}$ creatinine이었다.

P(VDF-co-HFP)/PBA 및 P(VDF-co-HFP)/P(BA-co-Bs) 블렌드의 상분리 거동 (Phase separation Behavior of P(VDF-co-HFP)/PBA and P (VDF-co-HFP)/P(BA-co-BS) Blends)

  • 홍성돈;김영호;김갑진
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.193-194
    • /
    • 2003
  • 전기활성 고분자인 poly(vinylidene fluoride)(PVDF)를 전기 비활성 고분자와 블렌드시키는 경우 어떤 블렌드계에서는 용융 온도 이상에서 LCST(lower critical solution temperature) 상분리 거동을 나타내는데[1,2], 이때 외부 전장을 가해주면 이들의 상분리 거동에 영향을 미칠 수 있다[3]. PVDF와 블렌딩시켰을 때 LCST 상분리 거동을 나타내는 고분자로는 poly(methyl methacrylate), poly(ethyl methacrylate), poly(1,4-butylene adipate) (PBA) 등이 있다[l,3]. (중략)

  • PDF

붕소/실리콘 졸 화합물로 도포된 편백 목재의 연기유해성 평가 (Smoke Hazard Assessment of Cypress Wood Coated with Boron/Silicon Sol Compounds)

  • 진의;정영진
    • 한국화재소방학회논문지
    • /
    • 제34권1호
    • /
    • pp.1-10
    • /
    • 2020
  • 본 연구는 건축 및 내구재용 목재인 편백 목재에 붕소/실리콘 졸 화합물을 처리한 후 화재위험성을 연기 유해성에 대하여 연기성능지수(SPI), 연기성장지수(SGI)와 연기강도(SI)를 중심으로 조사하였다. 화합물은 Tetraethoxyorthosilicate를 Boronic acid와 Boric acid 유도체와 반응시켜 합성하였다. 연기 특성은 편백목재에 대하여 Cone calorimeter (ISO 5660-1) 장비를 이용하여 조사하였다. 화재강도는 50 kW/㎡의 외부 열 유속(External heat flux)으로 고정시켰다. 연소 반응 후 측정된 연기성능지수는 편백목재와 비교하여 13.4~126.7% 증가하였다. 연기성능지수에 의한 화재위험성은 편백목재, PBA/Si, IBBA/Si, BA/Si 순서로 감소하였다. 연기성장지수는 편백목재와 비교하여 12.0~57.5% 감소하였다. 연기성장지수에 의한 화재위험성은 편백목재, PBA/Si, IBBA/Si, BA/Si 순서로 낮아졌다. 연기강도에 의한 화재위험성은 3.2~57.8% 감소하였으며 편백목재, PBA/Si, IBBA/Si, BA/Si 순서로 낮아졌다. COpeak 농도는 85~93 ppm였으며 공시편과 비교하여 37~43% 감소하였다. 화재위험성을 연기유해성에 대해 종합적으로 평가하면 편백목재, PBA/Si, IBBA/Si, BA/Si순서로 낮아졌다.

Deltamethrin에 노출된 흰쥐의 뇨 중 3-PBA 검출 및 노출상관성 (The Correlation Between Deltamethrin Exposure and Urinary 3-PBA Concentrations in Rats)

  • 김아름누리;전경미;박경훈;문병철;노진호;백민경
    • 한국환경농학회지
    • /
    • 제36권4호
    • /
    • pp.293-298
    • /
    • 2017
  • BACKGROUND: Pyrethroids (PYRs) are a widely used insecticide in agriculture and household area. In mammals, PYRs such as deltamethrin is metabolized to 3-phenoxybenzoic acid (3-PBA) in liver that is mainly excreted in urine. This study is designed to single exposure of deltamethrin to rats in a dose-dependent manner and identify the correlation between deltamethrin exposure and its metabolite (3-PBA) in urine. METHODS AND RESULTS: Exposure levels of deltamethrin were control (0 mg/kg bw), low (0.0705 mg/kg bw), medium (0.705 mg/kg bw) and high (7.05 mg/kg bw) dose. Low concentration was derived by ussing Korea predictive operator exposure model (KoPOEM). Dermal exposure persisted for 6 h, and urine specimens were collected for 24 h. The urine matrix was removed after a series of procedures and 3-PBA was analyzed by gas chromatography/mass spectrometry. CONCLUSION: There was a strong correlation ($R^2=0.83$) between the amount of oral exposure to delta me thrin and urinary levelof3-PBAexcreted. In dermal exposure groups of deltamethrin except high-dose, also there was a good correlation between urinary 3-PBA and deltamethrin exposure, but not stronger than in oral deltamethrin exposure groups. Based on these results, therefore, the amount of 3-PBA in urine can be used as a good monitoring indicator that reflexing the exposure level of deltamethrin to human body.

고장물리 기반 수중 매설형 PBA에 대한 신뢰성 설계 연구 (Reliability Design Analysis for Underwater Buriend PBA Based on PoF)

  • 김지영;이기원;윤홍우;이승진;허준기;권형안
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제17권4호
    • /
    • pp.280-288
    • /
    • 2017
  • Purpose: PBA buried in underwater requires high reliability because of its mission critical characteristic and harsh operational environment during its life cycle. Therefore, various reliability improvement activities are necessary. The defect on PBA manufacturing process have been studied, as a result, many activities and standards have been presented. However, there are less studies regarding failure pattern on physical features based on design. In this paper, we studied a possible failure patten based on physical features that is related with manufacturing process of PBA. And reliability improvement design based on PoF (Physical of Failure) were intruduced in this paper. Methods: A reliability prediction simulation were performed on the components A and B of the H system using Sherlock Software which is a PoF commercial tool from DFR solution. Solder fatigue and PTH fatigue analysis based on thermal cycling profiles and random vibration was analyzed on three earthquake response spectrum. Result: It was validated that life time and reliability improvement design through solder fatigue and PTH fatigue analysis in case of component. For compoenet B, random vibration fatigue was additionally analyzed and validated reliability for earthquakes profile. Conclusion: In design stage prior to manufacturing, PoF can be analyzed, and it is possible to make a reliability improvement/validated design using design data. This study can be applied in every design step and contribute to make more stable development product.

Paclitaxel-Coated Balloon versus Plain Balloon Angioplasty for Dysfunctional Autogenous Radiocephalic Arteriovenous Fistulas: A Prospective Randomized Controlled Trial

  • Jong Woo Kim;Jeong Ho Kim;Sung Su Byun;Jin Mo Kang;Ji Hoon Shin
    • Korean Journal of Radiology
    • /
    • 제21권11호
    • /
    • pp.1239-1247
    • /
    • 2020
  • Objective: To report the mid-term results of a single-center randomized controlled trial comparing drug-coated balloon angioplasty (DBA) and plain balloon angioplasty (PBA) for the treatment of dysfunctional radiocephalic arteriovenous fistulas (RCAVFs). Materials and Methods: In this prospective study, 39 patients (mean age, 62.2 years; 21 males, 18 females) with RCAVFs failing due to juxta-anastomotic stenosis were randomly assigned to undergo either both DBA and PBA (n = 20, DBA group) or PBA alone (n = 19, PBA group) between June 2016 and June 2018. Primary endpoints were technical and clinical success and target lesion primary patency (TLPP); secondary outcomes were target lesion secondary patency (TLSP) and complication rates. Statistical analysis was performed using the Kaplan-Meier product limit estimator. Results: Demographic data and baseline clinical characteristics were comparable between the groups. Technical and clinical success rates were 100% in both groups. There was no significant difference between the groups in the mean duration of TLPP (DBA group: 26.7 ± 3.6 months; PBA group: 27.0 ± 3.8 months; p = 0.902) and TLSP (DBA group: 37.3 ± 2.6 months; PBA group: 40.4 ± 1.5 months; p = 0.585). No procedural or post-procedural complications were identified. Conclusion: Paclitaxel-coated balloon use did not significantly improve TLPP or TLSP in the treatment of juxta-anastomotic stenosis of dysfunctional RCAVFs.

Ni3[Co(CN)6]2 PBA 나노큐브를 통한 단분산된 3차원 구조의 NiO/NiCo2O4 제조 및 특성 평가 (Synthesis and characterization of three-dimensional monodispersed NiO/NiCo2O4 via Ni3[Co(CN)6]2 PBA nanocubes)

  • 곽성훈;이영훈;김민섭;이철우;강봉균;윤대호
    • 한국결정성장학회지
    • /
    • 제27권3호
    • /
    • pp.110-114
    • /
    • 2017
  • $Ni_3[Co(CN)_6]_2$ PBAs의 하소과정을 통해 단분산된 $NiO/NiCo_2O_4$ 나노큐브를 성공적으로 합성했다. 단분산된 $Ni_3[Co(CN)_6]_2$ PBAs 나노큐브는 수열합성 반응 시 생성된 핵 들의 '자기조립'에 의해 형성된다. 이때 입자의 자기조립 속도는 온도와 계면활성제인 SDBS(Sodiumdodecylbenzenesulfonate)의 양에 의해 영향을 받으며, FESEM 분석을 통하여 SDBS: 0.25 g, 온도: $60^{\circ}C$에서 단분산된 200 nm의 PBA 나노큐브들을 얻을 수 있었다. 최적의 하소 조건을 결정하기 위해 Thermogravimetric-Differential Thermal Analysis(TG-DTA)를 통해 열적 거동을 확인하였다. 그리고 PBA 전구체 및 $NiO/NiCo_2O_4$ 입자의 형상과 결정성을 확인하기 위해 Field emission scanning electron microscopy(FESEM)과 X-ray diffraction(XRD) 분석을 진행하였다.

수중 환경에서 효율적인 무선 통신을 위한 매체접근제어 메커니즘 (Media Access Control Mechanism for Efficient Wireless Communication in Underwater Environments)

  • 정유진;신수영;박수현
    • 한국시뮬레이션학회논문지
    • /
    • 제15권4호
    • /
    • pp.79-86
    • /
    • 2006
  • 수중과 같은 에러의 변동이 크고 무선 통신에 제약이 따르는 환경에서 데이터 전송을 실행하게 되는 경우에는 상당히 심각한 지연율과 에러 발생률을 고려하지 않을 수 없다. 따라서 이러한 환경에서 사용되는 메커니즘은 가능한 한 효율적이면서 간단해야만 한다. 본 논문에서 제안하는 Pervasive Block ACK(PBA) 기법은 각 프레임마다 전송되던 ACK를 Set 단위로 묶어서 한꺼번에 보내주는 방법으로, 수중 등 열악한 환경에서 ACK 전송으로 인해 발생하는 트래픽 발생빈도 감소를 위해 제안되었다. Pervasive Block ACK 기법은 전송 횟수를 최소로 줄임으로써 오버헤드를 감소시켜 네트워크의 효율성을 높여 지연율은 줄일 뿐만 아니라 그에 부가적으로 전력 소비 절감의 효과까지도 기대할 수 있다. 본 논문에서는 Numerical Result를 통하여 제안에 관한 효율성 및 연구 가치를 증명하였다.

  • PDF