• 설비공학논문집
• /
• 제7권4호
• /
• pp.600-610
• /
• 1995

When combustion gas is cooled down below the dew point of sulfuric acid vapor in the heat recovery systems, condensation occurs. Since the condensed sulfuric acid solution causes low-temperature corrosion in materials, it is important to measure the SOx dew point by electric measurement. In this study, two kinds of probes having electric gaps of 1mm or 2mm were used. and experiments were carried out by the parameters of sulfuric acid vapor and water vapor concentration. The changes of electric current caused by sulfuric acid condensed on the surface of probe according to the cooling rate and the probe head surface temperature were sudied. The opimum cooling rate was decreased with the increasing of water vaper concentration regardless of sulfuric acid concentration. The sensitivity of electric current is improved for the narrower gap(1mm) of ring electrodes, but it rarely affects the SOx dew point measuring of different probes according to the change of cooling rate.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.16-21
• /
• 2008

The demand for three-dimensional (3D) shape measurements is increasing in a variety of fields, including the manufacture of molds and dies. The most popular technology for 3D shape measurement is the coordinate measuring machine (CMM) with a contact trigger probe. Although a CMM provides a high degree of accuracy, it is inefficient due to its long measuring time. It also has difficulty measuring soft objects that can be deformed by the touch of the contact probe. In addition, a CMM cannot digitize areas that are difficult to reach, and cannot capture very minute details on the surface of complex parts. For these reasons, optical non-contact measurement techniques are receiving more attention since they eliminate most of the problems associated with contact methods. Laser scanning is emerging as one of the more promising non-contact measurement techniques. This paper describes various acquisition considerations for laser scanning, including the accuracy of the 3D scan data, which depends on the charge-coupled device (CCD) gain and noise. The CCD gain and noise of a 3D laser scanner are varied while keeping the other conditions constant, and the measurement results are compared to the dimensions of a standard model. The experimental results show that a considerable time savings and an optimum degree of accuracy are possible by selecting the proper CCD gain and noise.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.178-185
• /
• 2014

This paper describes a fabrication multiplexing sensor probe that employs a fiber Bragg grating(FBG) based on multiple measurements to determine the blade deflection of a wind power generator the reliability analysis of this probe is also presented. To diminish the temperature sensitivity of the FBG sensor, we form multiple CFRPs onto the upper and lower layers of the FBG and package it with an epoxy resin. As a result, the depth of the CFRP is 1mm, and the temperature sensitivity is $2.39pm/^{\circ}C$. We construct a sensor network utilizing the fabricated sensor with a blade beam model. As the number of pendulums is increased on the fore-end of the beam, the strain value is measured. The strain variation is calculated from the measurement of the load on the blade beam model by monitoring the strain of the FBG sensor. When the linear equation is applied, the strain error is 0.4% and when the finite difference method is used, the tip deflection error is 3.3%. The displacement error derived from the strain value of the FBG sensor is 4.39%. The calculated result between the measured value of the dead-end of the beam and the strain is less than 2.46% tip distortion error. Therefore, our proposed multiplexing sensor probe is a low-cost and high-reliability solution for a commercial wind power generator.

• 비파괴검사학회지
• /
• 제14권2호
• /
• pp.83-89
• /
• 1994

고체내를 전파하는 초음파의 지향성과 음압 분포를 아는 일은 초음파탐상시험에 있어서 대단히 중요하다. 초음파의 지향성은 초음파탐상시험에 있어 감도, 주사 간격, 탐촉자의 배치, 결함의 종류 등을 판단하는 지침이 되고 있다. 본 논문에서는 초음파가시화법을 이용해 초음파의 지향성을 측정했다. 사각탐촉자로부터 나온 횡파의 지향성은 초음파의 전파 거리에 따라 변하지 않았다. 2MHz와 4MHz의 사각탐촉자에는 지향성의 차이가 있었다. 지향성의 중심 위치는 사각탐촉자의 입사점으로부터 뒤쪽 및 탐촉자의 내부에 위치하고 있었으며, 초음파의 전파 거리에 따라 변하지 않았다.

• Smart Structures and Systems
• /
• 제7권4호
• /
• pp.319-328
• /
• 2011

In this study, the measurements of the dielectric constants of soil at 900 MHz and 1 GHz were made to relate those properties to the moisture content of the soil. This study's intention was to use the relationship between the dielectric constant and the moisture content to develop a landslide prediction system. By monitoring the change of the moisture content within the soil using ground penetrating radar (GPR) systems in the field, the possibility of a landslide is expected to be detected. To establish a database for the dielectric constants and the moisture content, the measurements of soil samples were made using both an open-ended dielectric coaxial probe and the GPR. Based on the measurement results, correlations between the GPR and reflector for each frequency at 900 MHz and 1 GHz were found for the dielectric constants and the moisture content. Finally, the mechanism of the measurement device to be implemented in the field is suggested.

• 동력기계공학회지
• /
• 제12권4호
• /
• pp.18-25
• /
• 2008

This paper investigated the new calibration algorithm of a straight-type five-hole pressure probe necessary for calculating three-dimensional flow velocity components. The new data reduction method Includes a look-up, a geometry transformation such as the translation and reflection of nodes, and a binary search algorithm. This new calibration map was applied up to the application angle, ${\pm}55^{\circ}$ of a probe. As a result, this data reduction method showed a perfect performance without any kind of interpolation errors In calculating yaw and pitch angle from the calibration map.

• Design & Manufacturing
• /
• 제13권4호
• /
• pp.51-56
• /
• 2019

Due to industrial development, the importance of GD&T tolerance is growing day by day. Roundness measurement means the size deviated from the ideal circle. Roundness evaluation methods include LSCI, MZCI, MCCI, and MICI. Generally, A is used a lot at industrial evaluation. In this experiment, we studied the variations in table velocity, filter values, and detector angles, which can cause errors in roundness measurements. The measurement conditions were table speeds of 10, 30 and 60 mm/s, probe angles of 10, 20 and 30 degrees and frequency filter settings of 15, 150 and 500 upr and The number of experiments was measured 30 and the average value was chosen as a representative value. The hypothesis test showed that the p-value for the frequency filter was greater than 0.05, and the experiment rejected the null hypothesis and adopted the alternative hypothesis.

• 대한화학회지
• /
• 제30권6호
• /
• pp.500-509
• /
• 1986

새로운 전지의 개발을 위하여$ AgI-Ag_8S_3SO_4$system들을 만들어 이에 대한 전기전도도 측정, 상 연구 및 그 구조를 조사하였다. X-ray powder diffraction method로 20mole% $ Ag_8S_3SO_4$-AgI system의 구조가 단사정계임을 규명하였고 DTA method로 단일상을 이룸을 확인하였다. 4-probe method를 적용시켜 전기전도도를 측정한 결과 20mole% $ Ag_8S_3SO_4$-AgI system이 순수한 $ Ag^+ $이온성 couduct임을 밝힐 수가 있었다.

• Journal of electromagnetic engineering and science
• /
• 제4권3호
• /
• pp.97-101
• /
• 2004

Complex permittivities of reference liquids were measured by a liquid holder of slotted coaxial line with a movable probe at mobile communication frequencies. The validity of the liquid measurement system was checked by experimental tests with the reference liquids proposed in IEEE Std. 1528-200X or IEC 106/61/CDV.

• 펄프종이기술
• /
• 제40권4호
• /
• pp.10-15
• /
• 2008

Flocculation phenomena of the stock mixed with cellulosic fibers, fillers and polymers were investigated by a new turbidity measurement system consisted of a probe-type turbidimeter, data acquisition system and computer. The probe-type turbidimeter allowed to measure the real time flocculation of the stock induced by single polymer and microparticle systems. Flocculation phenomena were evaluated by average and final relative turbidity indices. Turbidity and flocculation showed inverse relationship, i.e. the turbidity decreased with the formation of flocs. Relative turbidity of the stock treated with microparticle system was lower than that of the stock containing single polymer system, which indicated that the microparticle system showed greater floc forming efficiency than single polymer system.