• 한국정밀공학회지
• /
• 제26권10호
• /
• pp.47-55
• /
• 2009

In this study, a robot foot having toes for firm stepping on uneven surface is proposed. The toes are connected to the lower leg by parallel links so that the lower leg can rotate in the rolling and pitching directions during stance phase without ankle joint. The landing performance of the foot on uneven surface was evaluated by relative comparison with that of the most common foot making point contact with the walking surface, since the test conditions considering real uneven surface could be hardly defined for its objective evaluation. Anti-slip margin(ASM) was defined in this study to express the slip resistance of a robot foot when it lands on a projection with half circular-, triangular- or rectangular cross section, assuming that uneven surface consists of projections having these kind of cross sections in different sizes. Based on the ASM analysis, the slip conditions for the two feet were experimentally confirmed. The results showed that the slip resistance of the new foot is not only higher than that of the conventional point contact type foot but also less sensitive to the surface friction coefficient.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.498-500
• /
• 2016

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.138-147
• /
• 1999

For autonomous navigation, a legged robot should be able to walk over irregular terrain and adapt itself to variation of supporting surface. Walking through slope is one of the typical tasks for such case. Robot needs not only to change foot trajectory but also to adjust its configuration to the slope angle for maintaining stability against gravity. This paper suggests such adaptation algorithm for stable walking which uses feedback of reaction forces at feet. Adjusting algorithm of foot trajectory was studied with the estimated angel of slope without visual feedback. A concept of virtual slope angle was introduced to adjust body configuration against slope change of the supporting terrain. Regeneration of foot trajectory also used this concept for maintaining its stable walking against unexpected landing point.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.446-449
• /
• 2002

Quadruped walking robot requires dynamic control to keep its stability in high speed walking. To keep its walking stability by control of only legs' Joint angle lowers energy efficiency. It is known that an animal or a human use the moving of the mass center of one's upper body to keep the stability. We have developed a quadruped walking robot with weight balancing oscillator that have high energy efficiency. In this study, walking tests are performed for the robot to verify the validity of the weight balancing oscillator.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.843-848
• /
• 2007

Quadruped robot is very useful mechanism for a various area. Recently, home entertainment and military robots adapted quadruped platform and useful function have been introduced. Our goal is the development of quadruped robot locomotion for any type of ground included to sloping one and irregular terrain. This paper, as a first step, deals with design and construction of quadruped robot walking on the flat ground. The most important factor of quadruped robot is stability of locomotion. At first, we introduce the developed quadruped robot based on dynamic simulation and experimental study of general gait algorithm. Finally, propose unique locomotion proper to our mechanism. Future work of this study is the performance test and analysis on the ground of various conditions and proposes the improved mechanism and gait algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.7-10
• /
• 2000

Inadequate footholds selection may result in deadlock state where the walking vehicle can not anymore to the desired direction. This paper concerns about the footholds selection for quadruped v, vehicle to walk with the leg lifting sequence of crawl gait which is desired for straight motion. supporting states for lifting a leg are defined and the proper supporting condition for quadruped c: also proposed. When selecting a footholds of swing leg within the proposed footholds searching are; supporting states after the swing legs are placed, satisfy the proper supporting condition. So it can I for quadruped to execute continuous walking with the lifting sequence of crawl gait.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.118-126
• /
• 2005

There are many types of walking robots in the world. For dynamic walking of the robots it is necessary to keep its dynamic stability. The dynamic stability is influenced by the position of ZMP (zero moment point). In this paper we study the control of the ZMP position of walking robot. For experiment we developed a quadruped robot and analyzed the dynamic stability of the robot. Developed robot has 2 joints at each leg and WBO (weight balancing oscillator) on the body of the robot. The WBO is designed to move linearly from side to side when the robot walks dynamically. Walking test was performed to verify the validity of the proposed methods. Especially we showed that the dynamic stability of the robot can be improved without sacrifice of the walking speed by control the WBO.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.83-91
• /
• 2000

During static walking of a quadruped walking robot, stability of the robot depends on whether the projection of the mass center is located within the supporting area that is varying with leg motion and formed by standing legs. In this paper, force margin instead of the mass center was used to determine stability and body-tilting method was used to enhance it. On-line control of body tilting was realized with simple reaction feedback based on force margin of the static walking model of the robot instead of complicated calculation. Model reference on-line control where the model searches stable pose for predefined force margin also gave good walking performance.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2015년도 추계학술발표대회
• /
• pp.1772-1775
• /
• 2015

본 논문에서는 쿼드콥터와 4족이동 로봇을 결합 하여 임베디드 보드를 이용한 실시간 영상처리를 활용하고 환경 탐지용 센서를 부착하여 재난극복 및 재난현장에서의 인명구조, 신원확인을 하는 지능로봇을 제안한다. 쿼드콥터는 비행이동을 하면서 임무를 수행하고 4족이동 로봇은 지상 임무수행을 하는 로봇이다. 본 논문에서는 쿼드콥터와 4족 이동로봇의 결합으로 인해 로봇의 무게 고려를 하여 설계를 하여, 비행과 지상을 이동하며 영상처리를 이용하여 임무를 수행 할 수 있는 로봇을 제작 했다.

• 한국시뮬레이션학회논문지
• /
• 제20권1호
• /
• pp.51-59
• /
• 2011

본 논문은 다양한 지면에 적응 가능한 견형 4족 로봇의 위치 이동에 관한 것으로 정 보행과 동 보행의 구현 방법 및 특성을 주로 다루었다. 이를 위하여, 총 12 자유도의 로봇을 자체 제작하였으며, 몸통과 발의 운동궤적을 생체 모방 방식으로 생성한 후 역기구학에 의하여 그에 해당하는 각 다리의 관절각을 해석적으로 구하였다. 이러한 관절각 데이터를 상기 로봇의 ADAMS 모델에 적용하여 컴퓨터 시뮬레이션을 수행한 결과, 계획된 걷기 및 속보 걸음새가 동력학적으로 안정함을 확인하였다. 그러나 그 이전의 속보 패턴의 경우에는 시뮬레이션 결과와는 달리 실험 중 불안정한 거동을 보였다. 그에 따라 원인 분석을 하는 과정 중, 속보와 같은 동 보행의 경우 ZMP보다는 WSM의 개념을 적극적으로 활용하고 보행 주기를 최대한 단축시키는 것이 안정성 확보에 매우 중요함을 발견하였다.