• Spatial Information Research
• /
• v.20 no.4
• /
• pp.1-16
• /
• 2012

There is no doubt that the urban heat island (UHI) is a mounting problem in built-up environments, due to energy retention by the surface materials of dense buildings, leading to increased temperatures, air pollution, and energy consumption. To investigate the UHI, three-dimensional (3-D) information is necessary to analyze complex sites, including dense building clusters. In this research, 3-D building geometry information is combined with two-dimensional (2-D) urban surface information to examine the relationship between urban characteristics and temperature. In addition, this research introduces spatial regression models to account for the spatial spillover effects of urban temperatures, and includes the following steps: (a) estimating urban temperatures, (b) developing a 3-D city model, (c) generating urban parameters, and (d) conducting statistical analyses using both Ordinary Least-Squares (OLS) and Spatial Regression Models. The results demonstrate that 3-D urban characteristics greatly affect temperatures and that neighborhood effects are critical in explaining temperature variations. Finally, the implications of the results are discussed, providing guidelines for policies to reduce the UHI.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.E
• /
• pp.357-370
• /
• 1994

This paper introduces an Eulerian long- range transport model coupled with a mesoscale atmospheric model. The model has been applied to the simulation of tracer distribution during two cases of Cross Appalachian Tracer Experiment (CAPIEX). Meteorological fields are Predicted by CSU RAMS with four-dimensional assimilation and tracer transport is computed from an Eulerian dispersion model. The atmospheric model with a four-dimensional assimilation has produced meteorological fields that agree well with observation and has proved its high potential as a generator of meteorological data for a long-range transport model. The Present transport model Produces reasonable simulations of observed tracer transport although it was partially successful in the case with complicated structure in observed concentration. Model with Bott's 2nd-order scheme performs as well as that with Bott's 4th-order scheme and increased explicit horizontal diffusivity. Diagnosis of the model results indicates that the Present long-range transport model has a good potential as a framework for the acid deposition model with detailed cloud and chemical processes.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.59-69
• /
• 2013

The numerical simulations were performed to analyze the advection-diffusion processes of dredging-induced turbidity plume using RMA2 and RMA4 models in Bunam reservoir, Seosan, Chungnam. Field survey was also performed to measure the turbidity using the multi water quality monitoring system (YSI6600EDS). In the field survey, the vertical and horizontal distributions of the turbidity were measured during the dredging operation in Bunam reservoir. RMA2 model was used to simulate the velocity distributions in both the whole domain and the 2nd part of Bunam reservoir. RMA4 model was also used to simulate the concentration distribution in only the 2nd part of Bunam reservoir, where the dredging work were conducted. The comparison of the simulation results with the field data for the advection-diffusion of the turbidity plume using the concentration ratio concepts shows that the numerical model can be applied to analyze the environmental impact of dredging works.

• Information Systems Review
• /
• v.20 no.1
• /
• pp.41-59
• /
• 2018

This study analyzed the factors that affect acceptance of online direct marketing in agricultural companies. Empirical analysis was conducted using the research model based on the individual's technology acceptance model (TAM) and the information technology adoption models in organizations. These models have four dimensions: 1) technology characteristics, which include perceived usefulness and perceived ease of use of TAM 2) CEO characteristics, which including the innovativeness and IT capability of CEOs; 3) organizational readiness, which include financial, technological, and human resources capabilities and 4) environment and external pressure, which include government support and changes to the Internet environment. These concepts were empirically tested. A total of 209 valid data were collected through questionnaires and analyzed using confirmatory factor analysis and path analysis through the application of structural equation modeling. Results show that perceived usefulness, IT capability of CEOs, and changes to the Internet environment have significant effects on the adoption intention of online direct marketing. However, perceived ease of use, CEO innovativeness, government support, and the variables of organizational readiness dimension did not have significant effects on adoption intention. This study suggests practical implications for adoption of online direct marketing in agricultural companies.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.587-587
• /
• 2012

현재 대부분 하천관리의 흐름해석에서 주가 되었던 1차원 분석은 하천 단면에 따른 횡적인 수면차, 유속분포를 분석할 수 없다는 단점을 가지고 있으며, 특히 유량 및 유속이 급속도로 늘어나는 홍수시에는 그 오차가 더욱 커질 수 있다. 반면에 2차원 모형의 흐름해석은 사행하천의 흐름 특성과 만곡부에서의 종 횡방향 수면경사 및 양안의 수면차와 합류지점의 횡방향 흐름 등의 영향을 고려할 수 있으며 1차원 해석과는 달리 전 단면에 걸쳐 유속 및 수위 분포를 나타낼 수 있어 실제흐름에 가까운 수리량을 얻을 수 있다. 본 연구를 위해 적용된 해석모형인 SMS는 미국 Brigham Young 대학의 환경모형연구실과 미공병단(USACE)의 수로실험국(WES) 등에서 개발한 프로그램으로서 RMA2, RMA4, SED2D 모형 등으로 구성되어 있다. 각각의 모형은 수리 동역학적 해석, 오염물 이송확산 해석, 유사의 이송 및 퇴적 해석이 가능하며 이 중 RMA2를 이용한 2차원 흐름해석을 통하여 보다 적합한 하천관리에 이용가능하도록 하고자 한다. 연구대상 지역은 제주도 한천 하류부로서 제주도 하천 특성상 평상시 건천의 상태를 이루고 있으나 태풍 및 집중호우시 홍수유출이 발생하여 수위가 급격하게 상승하는 양상을 보인다. 대표적인 예로 태풍 '나리'시 최대 일강우량 420mm로 인한 인근 지역에 0.5 ~ 1.5m의 침수흔적을 보이고 있다. 본 연구에서는 2011년 최고수위를 기록한 태풍 '무이파'를 대상으로 하였으며 대상지역의 Kalesto를 이용한 수위-유속 자료를 이용하여 산출된 유량을 경계조건으로 사용하였고 격자망 형성을 위한 지형 데이터는 지형도 및 측량자료를 이용하여 구축하였다. 사용된 대표적인 매개변수는 하상의 조도계수를 나타내는 Manning의 n값과 유체의 밀도, 속도구배, 구조 등 여러 가지의 유체조건에 따라 변하는 성질인 와점성계수(eddy viscosity)로 요약할 수 있으며 Manning의 n값은 하천설계기준에 따른 하천기본계획의 조도계수를 사용하였고 와점성계수는 적합한 흐름 분포를 결정하기 위해 흐름이 안정될 때까지 변화시켜 해석을 시행하였다. 해석결과 만곡부에서는 급한 흐름을 보이고 있으며 최대하폭 구간에서는 완만한 흐름이 나타나 사행하천의 흐름특성과 횡적인 하천단면에 따른 변화, 하상고 차이로 인한 유속분포를 확인할 수 있으며 이는 보다 유용한 하천관리에 이용가능할 것으로 사료된다.

• Water for future
• /
• v.21 no.2
• /
• pp.183-192
• /
• 1988

The previous two-dimensional non-linear tidal model of the East China Sea(Choi, 1980) has been further refined to resolve the flow over the ocntinental shelf in more detail. The mesh resolution of the present finite-difference grid system used is 4 minutes latitude by 5 minutes longitude over the entire shelf. The developed fine grid two-dimensional model was utilized to reproduce the $M_2$ tide and $M_4$ tide for the East China Sea contnental shelf. There is general agreement between the model results and the current observation made in the Eastern Yellow Sea, which supports the calculated tidal regime over the shelf. Some preliminary results on maximum bottom stress and tidally-induced residual current were also examined and discussed.

• Culinary science and hospitality research
• /
• v.15 no.4
• /
• pp.227-244
• /
• 2009

This study was conducted to develop a multiple-item scale for measuring the food service quality in the restaurant industry. For developing the scale, Kelly Repertory Grid Methods were conducted. Collected data of food service quality were analyzed with the reliability analysis and the factor analysis of SPSS 12.0 and the 3rd-order confirmatory factor analysis of LISREL 8.70. The food service quality model of this study is conceptually based on the Brady and Cronin(2001)'s hierarchical approach to the service quality model. The hierarchical model of the food service quality which comprises three constructs of the physical environment quality, the interaction quality and the food quality as a primary dimension. The hierarchical approaches to the food service quality help overcome the limitations of the SERVQUAL model for which some arguments have been made that it lacks a clear division between the dimensions and its subsequent overlapping between them.

• Child Health Nursing Research
• /
• v.20 no.4
• /
• pp.350-358
• /
• 2014

Purpose: The purpose of this study was to define and clarify the concept of developmental care for preterm infants. Methods: The hybrid model method was used to identify the main attributes and indicators. In the field work stage, data were collected in Seoul and Cheonan, Korea. The participants were 5 nurses working in the NICU. Results: The concept of developmental care was found to have six attributes and ten indicators in 2 dimensions. For the nursing practice dimension, four attributes were derived. They were being like intrauterine state, individualization, interaction, and integrative care with awareness of development. For the family centeredness dimension, supporting parental attachment and professional alliance were attributes of developmental care. Conclusion: Developmental focused care can facilitate the identification of behavioral responses of newborns and provide individualized interventions for fostering growth and development. This concept analysis could provide guidelines for "developmental care" nursing practice and be useful for research in the neonatal field.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.617-623
• /
• 2012

This study was performed to measure the accuracy of different gypsum materials by a white light dental scanner. A master model with the prepared lower full arch tooth was used. The type IV and scannable stone were used for 20 stone casts (10 casts each) duplicated a master model of mandible. The distance between the reference points were measured and analyzed by the Delcam $Copycad^{(R)}$ (Delcam Plc, UK) 3D graphic software. The t-student test for paired samples were used for statistical analysis. The mean differences to master model for type IV stone and scannable stone model were 0.29~0.56 mm, and 0.17~0.35 mm, respectively. There were statistical differences in dimensional accuracy for full arch impression between the master model and type IV/scannable stone (p<0.05). Two different gypsum materials showed clinically acceptable accuracies of full arch digital impression produced by them. Besides, in both gypsum materials, the differences to the master model detected appear to provide enough accuracy for clinical application.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2100-2104
• /
• 2008

현재 전국적으로 하천을 횡단하는 보에 어도시설이 되어 있는 곳은 4.6%에 불과하고, 기존에 설치된 어도의 경우에도 설계단계에서부터 회유성 어류의 통로로 부적합하거나, 시공 후 관리부실로 하상이 세굴되거나 퇴적되어 어도로서의 기능을 상실한 경우가 많은 실정이다. 또한 어도의 위치는 통수장애 및 퇴적을 고려하여 하천의 유심(流心)과 연결되는 위치에 설치해야 함에도 불구하고 엄밀한 수리계산 없이 어도의 설계가 이루어지는 경우가 많다. 따라서 본 연구에서는 1차원 및 2차원 흐름해석을 통해 어도 효율을 높일 수 있는 방안을 강구하였다. 흐름해석 대상구간은 왕숙천의 퇴계원 수위표 지점부터 상류 약 4km 구간이며, 이 구간에 3개의 보가 존재한다. 상하류 연속성 확보를 위해 어도 설치시 고려 대상 종으로 왕숙천 중류에만 출현하는 긴몰개를 삼았다. 보에 어도가 없는 상태에서 흐름 및 하상변동 해석을 수행하여 이를 바탕으로 어도를 설치하기에 적정한 위치를 도출하였다. 2차원 흐름모형의 하나인 RMA-2를 사용하여 유심선을 파악하였으며, 하상변동 해석 모형인 SED-2D를 이용하여 홍수시 어도 입,출구에 예상되는 세굴 및 퇴적양상을 확인하였다. 갈수시 설치된 어도에 충분한 유량이 확보되는가를 확인하기 위해 HEC-RAS를 이용하여 1차원 흐름해석도 병행하였다. 2차원 흐름해석 결과 대상구간의 좌안쪽으로 유심선이 발생하므로 어도는 이를 따라 보체의 좌안쪽에 설치함이 타당하다. 그러나 홍수시 하상변동해석 결과, 좌안쪽에 상당량의 퇴적이 발생하는 경우에는 퇴적이 진행되지 않는 보의 중앙부에 어도를 설치함이 타당하다고 사료된다.