• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.535-536
• /
• 2006

4단자 방법과 van der Pauw 측정방법으로 자성금속(Fe)과 비자성금속(SUS316)에 대한 전기 비저항을 시험한 결과 van der Pauw 방법에 의한 측정결과를 기준값으로 비교하였을 때, 전극 간격이 시료 단위면적 총길이의 3배에 해당하는 위치에서 비저항 값이 일치하였으며, 이를 도전율로 환산하였을 때 전극 간격이 좁을 수 록 도전율은 크게 나타났다.

• Journal of Sericultural and Entomological Science
• /
• v.30 no.1
• /
• pp.25-32
• /
• 1988

In order to examine a physiological role of juvenile(JH) binding proteins in the hemolymph of the silkworm larva, Bombyx mori, [3H] JH I incubated hemolymph was separated by polyacrylamide gel electrophoresis in the fifth-instar larva and the activity of the binding protein was analyzed using charcoal binding assay. The results obtained were as follows; 1. The JH was bound by two protein fractions in the hemolymph of the fifth-instar larva; One was JH binding lipoprotein(JH-LP), the other was JH speific binding protein(JHBP). Their relative mobility values(Rm) were 0.3∼0.33 and 0.81∼0.84, respectively. There were no valid differences in those values from developmental stages of both male and female silkworms. 2. Total protein contents of the hemolymph were gradually increased during the fifth-instar larva, while at the prepupa decreased. The maximum ones were observed at the spinning period and the contents from female were much higher than those from the male. 3. JH binding activity per ml of the hemolymph was low in the early stage of the fifth-instar larva and its activity was maximized at the psinning period and at the prepupa slightly decreased. 4. There was a similar pattern between changes of the JH binding activity per ml of the hemolymph and of the total protein contents of the hemolymph. 5. The JH binding activity per mg of the hemolymph proteins was high in the early stage of the fifth-instar larva, while from the 6th day of the fifth-instar larva to the prepupa its activity showed the lowest levels.

• Tunnel and Underground Space
• /
• v.20 no.4
• /
• pp.292-298
• /
• 2010

The purpose of this study is to evaluate an effect of ground vibration caused by blasting on the concrete brick structure. For the purpose, dynamic response time-history of the structure assumed single degree of freedom (SDOF) system and vibration time-history directly measured from the structure were examined, using Newmark $\beta$ method based on data measured at ground. The time-history was interpreted from the measured data of ground and structure in single hole blasting. Vibration magnitude between ground vibration and structure in single hole blasting and 20 ms interval blasting was about three times and was shown larger vibration on the structure. By time-history analysis of structure dynamic response, the value was almost the same one with the data measured from the structure. It indicates that the vibration characteristics of structures may be predicted on the basis of the ground vibration data measured from the sub-ground of structure.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2124-2125
• /
• 2011

금속의 비저항 측정방법은 4단자 방법, van der Pauw 방법, Four-Point Probe(FPP) 방법, eddy current 방법 등이 있다. 이들의 측정방법은 다르지만 동일한 시료에 대해 평가한 비저항은 측정 불확도 범위 내에서 일치하여야 한다. 이에 따라 균질한 비자성 금속(STS 316)을 선정한 후 비저항을 평가한 결과 4단자와 van der Pauw 방법에 의한 비저항(도전율)은 각각 75.86 ${\mu}{\Omega}{\cdot}cm$(2.273 %IACS)과 75.84 ${\mu}{\Omega}{\cdot}cm$(2.273 %IACS)로서 거의 동일한 결과를 나타냈으며, Four Point Probe(FPP) 방법은 75.91 ${\mu}{\Omega}{\cdot}cm$(2.271 %IACS), eddy current 방법은 76.63 ${\mu}{\Omega}{\cdot}cm$(2.25 %IACS)으로 나타났다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1798-1802
• /
• 2013

We present a technique for measuring low resistance ranges of a decade resistor with a 4-Terminal connection. With the technique the accuracy of 0.8 % was obtained for a 1 $m{\Omega}$ resistance of the decade resistor. We suggested a proper pattern 4-Terminal measurement results with several 4-Terminal pattern and adapters. Additionally, we should that precise measurements for low resistance can be made usung a digital multimeter(DMM) only.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.895-903
• /
• 2007

Design equations of DC blocks terminated in arbitrary impedances are newly suggested and a microstrip DC block is tested for the perfect matching. The DC block is a two-port passive component and the power excited at a port is transmitted into another port. However, all the excited power at the input can not be delivered to the output and therefore most of the conventional DC blocks can not be perfectly matched with arbitrary termination impedances. To solve the matching problem, its one-port equivalent resonant circuit model, front which design equations can be derived, is newly suggested. Using the derived design equations, any DC block can be designed, perfectly matched without any restriction of coupling coefficients. To verify the derived design equations, measurements were carried out and the results are in good agreement with prediction, showing insertion and return losses at 4.1 GHz are 0.82dB and -31dB, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.323-330
• /
• 2005

We fabricate PIN PD (Positive Intrinsic Negative Photo-Diode) for CWDM optical repeater and optical transmission system, and analyze theoretically the characteristics to verify the capability of device fabricated. Furthermore, we integrate CWDM filter into PD package to enhance the cost and the performance when compared to the conventional system, in which CWDM filter and PD package are linked by optical fusion splicing. The integrated CWDM PD is fabricated by three steps as follows: CWDM filter design, PD packaging, and product assembly and test. The results of measurement for PD fabricated reveal 0.5 dB bandwidth of 17 nm, isolation over 60 dB at transmission port and over 20 dB at reflection port. Also, the IMD3 for wireless communication is over 63 dBc, and the responsivity of PD presents over 0.9 A/W for 20 samples of the total 23 PD. The total insertion loss reduces about 0.4${\~}$0.7 dB due to the integrated assembly of CWDM and PD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.771-783
• /
• 1996

A desing technique of 8 ports variable wave impedance generator (8P-VWIG) is described. The design technique employs not only a numerical algorithm to find the structure with arbitrary characteristic impedance, but also a numerical solution to analyze the uniform elementrognentic fields established inside the generator. The 8P-VWIG so obtained is shown to have good performance with the VSWR of less than 1.4 at any frequency of interest below which higher order mode begin to propagate. The measured first resonant frequency is 152.1 MHz. The 8P-VWIG is designed based on the concept of an expanded multi-transmission line(8 channel). It is especially useful for the electronmagnetic interference(EMI) and electronmagnetic susceptibility(EMS) testing since it maximizes usable test crosssectional area, and its is easy change the polarization, vertical or horizontal, of field.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1191-1194
• /
• 2004

최근 항공우주산업을 비롯한 자동차, 선박, 철강, 건설, 전기, 국방, 금속산업 등 산업의 현장에서 첨단소재들을 널리 사용하고 있으며, 특히 비자성 금속재료에 대한 도전율 특성의 정밀분석이 요구되고 있다. 따라서 본 연구는 비자성 재료의 전기 도전율에 대해 널리 사용되고 있는 3가지의 측정방법을 통하여 정확한 측정과 함께 비교 분석하였으며, 이 측정 방법에 따라 평가된 도전율 측정결과는 0.5 %이내의 정확도에서 일치하고 있는 것으로 나타났다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.417-426
• /
• 2010

This paper describes the 6-way power divider to be used as a feeding structure of the waveguide array antenna generating the plane wave at the near distance. The SMA connector has been connected at the center of the power divider in order to feed the radiating element. The six output ports made of waveguide are positioned on the peripheral of the divider. This paper proposes the method utilizing the inductive post in order to decrease the return loss. The height of the feeding pin, the diameter of the inductive post, and the distance between the feeding pin and inductive post have been investigated, and as a result, the power divider has been optimized. The simulated and measured results show the low return loss of about -40 dB. The calculated and measured transmission coefficients are -7.78 dB and -8.06 dB, respectively. The output power of the six waveguide port show equal-amplitude and equal-phase distribution. Since the power divider proposed in this paper can be expanded to the divider having several output ports, it could be easily applied to the various array antennas.