• Restorative Dentistry and Endodontics
• /
• v.37 no.1
• /
• pp.24-28
• /
• 2012

Objectives: The aim of this study was to test the hypothesis, that the effectiveness of irrigation in removing smear layer in the apical third of root canal system is dependent on the depth of placement of the irrigation needle into the root canal and the enlargement size of the canal. Materials and Methods: Eighty sound human lower incisors were divided into eight groups according to the enlargement size (#25, #30, #35 and #40) and the needle penetration depth (3 mm from working length, WL-3 mm and 9 mm from working length, WL-9 mm). Each canal was enlarged to working length with Profile.06 Rotary Ni-Ti files and irrigated with 5.25% NaOCl. Then, each canal received a final irrigation with 3 mL of 3% EDTA for 4 min, followed by 5 mL of 5.25% NaOCl at different level (WL-3 mm and WL-9 mm) from working length. Each specimen was prepared for the scanning electron microscope (SEM). Photographs of the 3mm area from the apical constriction of each canal with a magnification of ${\times}250$, ${\times}500$, ${\times}1,000$, ${\times}2,500$ were taken for the final evaluation. Results: Removal of smear layer in WL-3 mm group showed a significantly different effect when the canal was enlarged to larger than #30. There was a significant difference in removing apical smear layer between the needle penetration depth of WL-3 mm and WL-9 mm. Conclusions: Removal of smear layer from the apical portion of root canals was effectively accomplished with apical instrumentation to #35/40 06 taper file and 3 mm needle penetration from the working length.

• Journal of Periodontal and Implant Science
• /
• v.26 no.4
• /
• pp.779-797
• /
• 1996

The present study investigated the effects of variations in decalcification time of demineralized freeze-dried bone on the osteogenic potential of DFDB. Sixteen 3-wall intrabony defects with 4mm depth were surgically created in the mesial aspect of upper and lower anterior teeth of 4 dogs. Following the flap procedure, three test groups with 4 defects each received either freeze-dried bone graft (Group I), demineralized freeze-dried bone graft decalcified for 12hours (Group II), or demineralized freeze-dried bone graft decalcified for 24hours(Group III). The rest of the four defects received the flap procedure-only as the control group. The healing was histologically analyzed after 14 weeks on the length of connective tissue adhesion, new bone formation and new cementum formation. The results were as follows: 1. The length of connective tissue adhesion showed no statistically significant difference in all groups with $0.62{\pm}0.14mm$ for Control, $0.42{\pm}0.11mm$ for Group I, $0.63{\pm}0.43mm$ for Group II and $0.52{\pm}0.11mm$ for Group III. 2. The new bone formation showed no statistically significant difference in all groups with $3.17{\pm}0.24mm$ for Control. $3.15{\pm}0.56mm$ for Group I. $3.22{\pm}0.36mm$ for Group II, and $3.28{\pm}0.74mm$ for Group III. 3. The new cementum formation showed no statistically significant difference in all groups with $4.19{\pm}0.46mm$ for Control, $3.23{\pm}0.64mm$ for Group I, $4.13{\pm}1.82mm$ for Group II. and $3.13{\pm}0.62mm$ for Group III.

• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.93-100
• /
• 2011

This study was conducted to verify the applicability of robot milking system through acquisition and analysis of model teat's position information using scanning range finder (SRF). Model teats, same size and shape as real teats, were designed to analyze the properties according to the material, distance error and angle error of the sensor. In addition, 2-dimensional distance information of each teats was obtained at same time with 4 teat models and the result were as follows. 1. In the case of the fingers on the experiment for selection of materials for teat model, the distance error was from 4.3 mm to 1.3 mm, average was 2.8 mm as a minimum record. In the case of rubber material, average distance error was 4.3 mm. So, this material was considered to be a most suitable model. 2. The distance error was maximum at 100 mm distance. The more distance increased, the less error increased up to 300 mm. Then the error increased after 300 mm and decreased again. 3. The maximum angle error of 10.1 mm was measured at $170^{\circ}$, in case of $70^{\circ}$ the error was 0.2 mm as a minimum value. There was no specific tendency to error of angle. 4. In the 2-dimensional location error for 4 teat models, distance error was 3.8 mm as minimum and 7.2 mm as maximum. The angle error was $1.2^{\circ}$ as maximum. All of errors were included within the accuracy of sensor, the robot milking system was considered to be applicable to measure the distance of teats due to the measuring velocity of SRF and the hole size of teat-cup.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.120-125
• /
• 2000

This study analyzes agricultural water demand nationwide which calculated by the estimation system for agricultural water demand(ESAD) with the data are observed in the other Studies. The results are as follows. Maximum, minimum and average values of annual evapotranspiration in paddy in 1,767 boundaries covering all the country are estimated as 819.2mm, 595.2mm and 702.9mm respectively. In the case of transplant seeding, the annual effective rainfall is estimated as 834.7mm to 464.3mm, while the average is 635.3mm. The amount of effective rainfall is largest in case of transplant seedlings and then come watered direct seeding and dry direct seeding regardless of region. Maximum, minimum and average values of annual evapotranspiration in upland in 1,767 boundaries are estimated as 659.97mm, 129.3mm and 411.8mm respectively. The annual effective rainfall is estimated as 607.2mm to 68.3mm while the average is 257.4mm. infiltration ratio in paddy in 1,767 boundaries applied in ESAD is 5.06mm/day in average, varying from 12.0mm/day to 2.0mm/day. Applied conveyance loss is 12.8% in average, varying from 18.0% to 8.0%.

• Journal of Embryo Transfer
• /
• v.16 no.3
• /
• pp.183-191
• /
• 2001

This study was designed to establish the superior method for IVF embryos from DNA marker-proved Hanwoo cattle. DNA markers related to marbling score were identified using DNA fingerprinting with Ml3 probe and restriction enzyme Hae III. Oocytes were aspirated from unstimulated. immature ovarian follicles using a combined method of rectal ovarian-palpation and transvaginal ultrasound-guidance(6.5MHz) under local abesthesia. The aspirated oocytes were washed twice with fresh D-PBS containing 5% FBS and were rewashed 4 to 5 times with TCM-199 containing 5% FBS. A morphological grade of I to IV was assigned to each oocyte. Data were analysed using the GLM procedure of SAS. Mean number of follicles identified on ultrasound was 5.5 $\pm$2.9 in right and 4.3 $\pm$2.8 in left ovaries, respectively. The highest follicles(16.6$\pm$2.6) were found in 5101 cow compared to others. Recovery rate of follicular oocytes in individual cow was highest in 5101 cow with 89.3% in > 2mm and 94.0% in $\leq$ 2mm follicles. Total recovery rate was significantly(P<0.01) higher in $\leq$ 2mm(85.7%, 130/154) than > 2mm follicles(74.2%, 201/271). Significantly more oocytcs of Grade IV were recovered from > 2mm follicles. Mean number follicles recovered was 4.8$\pm$3.7. 3.0$\pm$3.4 and 0.3$\pm$0.6 in $\leq$2mm, 2~6mm and $\geq$6mm follicles. respectively. Our results imply that the more fertilizablc oocytes can be recovered from invisible-immature follicles by the combination of simultaneous rectal ovarian-palpation and ultrasound-guided approach in Hanwoo cattle.

• Resources Recycling
• /
• v.3 no.1
• /
• pp.38-43
• /
• 1994

The separation of valuable metals from IC chip scrap generated by domestic electronic company was carried out using the mechanical beneficiation such as shredding, crushing, screening and magnetic separation. The distribution of metals in various sizes of crushed IC chip scrap was investigated and metals present in crushed products was separated with the magnetic separator. The particle size distribution of crushed IC chip scrap was 7.5% for +3mm, 17.0% for 3~1mm and 75.5% for -1mm. The weight loss of crushed IC chip scrap was 18% when roasted at $700^{\circ}C$. The content of metals was 96% for +3~1mm, 13% for 1~0.595mm, 3.7% for 0.95~0.5. Au of 99% was present in -1mm crushed IC chip scrap. Ni, Fe, Cu, Sn and Pb were separated from crushed IC chip scrap by the magnetic separator under 700 and 2, 500 Gauss.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.3
• /
• pp.193-203
• /
• 2001

Orthognathic surgery of the mandibular prognathism and the retrognathism is tend to be performed on the mandibular ramus to prevent inferor alveolar nerve injuries. The purpose of this study is to find a safe and accurate reference point on mandibular ramus for orthognathic surgery by comparative anatomical study of dentofacial deformity patients. We use 38 Korean Cadavers with normal occlusion(Group 1), 3-dimensional simulation of computerized tomogram of 23 patients with retrognathism (Group 2), 27 patients with mandibular prognathism (Group 3). Following results are obtained : 1. The maximum thickness of the mandibular ramus is $8.78{\pm}1.15mm$ for Group 2, $7.61{\pm}1.26mm$ for Group 1, $6.95{\pm}0.82mm$ for Group3 respectively (P=0001). The minimum thickness is $5.51{\pm}1.08mm$ for Group 1, $5.06{\pm}0.40mm$ for Group 2, $4.56{\pm}0.78mm$ for Group3, respectively (p=0.0001). But, the thickness at the level of 5mm above the lingular is $0.78{\pm}0.65mm$ for Group 2, $5.63{\pm}1.28mm$ for Group 1, $5.32{\pm}0.91mm$ for Group 3, respectively. There is no significant difference between these groups(P=0.0510). 2. The horizontal location from the midwaist point to lingular is $0.18{\pm}1.57mm$ for Group 1, $0.69{\pm}1.33mm$ for Group 2, $0.66{\pm}1.66mm$ for Group 3, and there is no significant difference between these groups(p=0.0835). But the vertical location from the midwaist point to lingular is $1.45{\pm}2.64mm$ for Group 1, $0.63{\pm}1.44mm$ for Group 2, $0.34{\pm}1.81mm$ for Group 3, and there is significant difference between these groups(p=0.0030). 3. The horizontal location from the midwaist point to mandibular foramen is $0.29{\pm}1.75mm$ for Group 1, $0.63{\pm}1.44mm$ for Group 2, $0.34{\pm}1.81mm$ for Group 3, and there is no significant difference between these groups(p=0.5403). But the vertical location from the midwaist point to mandibular foramen is $-3.33{\pm}4.43mm$ for Group1, $-4.79{\pm}2.26mm$ for Group 2, $-6.06{\pm}2.99mm$ for Group 3, and there is significant difference between these groups(P=0.0001). 4. The horizontal length from the disto-buccal cusp tip of mandibular second molar to lingula is $30.97{\pm}4.17mm$ for Group 3, $28.29{\pm}2.65mm$ for Group 1, $25.48{\pm}0.77mm$ for Group 2 (p=0.0000), and also vertical length is $7.72{\pm}3.22mm$ for Group 3, $6.38{\pm}1.83mm$ for Group 1, $5.89{\pm}2.30mm$ for Group 2 (P=0.0014). 5. The location of lingular is 0.50 from anterior border of mandibular ramus in all groups, if it assumed the length from anterior border to posterior border is 1. And it is almost 0.33 from the sigmoid notch, if it assumed the length from sigmoid notch to antegonial notch is 1. 6. In Group 1, Antilingular prominence is located on ($1.12{\pm}1.43mm,\;4.01{\pm}2.36mm$) from the midwaist point, and there is no correlation between antilingular prominence and lingular, mandibular foramen.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.273-280
• /
• 2014

Purpose : To verify the skin dose in Tomotherapy-based radiation treatment according to the change in tumor locations, skin dose was measured by using Gafchromic EBT3 film and compared with the planned doses to find out the gap between them. Materials and Methods : In this study, to measure the skin dose, I'm RT Phantom(IBA Dosimetry, Germany) was utilized. After obtaining the 2.5mm CT images, tumor locations and skin dose measuring points were set by using Pinnacle(ver 9.2, Philips Medical System, USA). The tumor location was decided to be 5mm and 10mm away from surface of the phantom and center. Considering the attenuation of a Tomo-couch, we ensured a symmetric placement between the ceiling and floor directions of the phantom. The measuring point of skin doses was set to have 3mm and 5mm thickness from the surface. Measurement was done 3 times. By employing TomoHD(TomoHD treatment system, Tomotherapy Inc., Madison, Wisconsin, USA), we devised Tomotherapy plans, measured 3 times by inserting Gafchromic EBT3 film into the phantom and compared the measurement with the skin dose treatment plans. Results : The skin doses in the upper part of the phantom, when the tumor was located in the center, were found to be 7.53 cGy and 7.25 cGy in 5mm and 3mm respectively. If placed 5mm away from the skin in the ceiling direction, doses were 18.06 cGy and 16.89 cGy; if 10mm away, 20.37 cGy and 18.27 cGy, respectively. The skin doses in the lower part of the phantom, when the tumor was located in the center, recorded 8.82 cGy and 8.29 cGy in 5mm and 3mm, each; if located 5mm away from the lower part skin, 21.69 cGy and 19.78 cGy were respectively recorded; and if 10mm away, 20.48 cGy and 19.57 cGy were recorded. If the tumor was placed in the center, skin doses were found to increase by 3.2~17.1% whereas if the tumor is 5mm away from the ceiling part, the figure decreased to 2.8~9.0%. To the Tomo-couch direction, skin doses showed an average increase of 11% or over, compared to the planned treatment. Conclusion : This study found gaps between planned skin doses and actual doses in the Tomotherapy treatment planning. Especially to the Tomo-cocuh direction, skin doses were found to be larger than the planned doses. Thus, during the treatment of tumors near the Tomo-couch, doses will need to be more accurately calculated and more efforts to verify skin doses will be required as well.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.137-144
• /
• 2009

The aim of this study was to investigate the shapes and diameters of the physiological foramen and anatomy of the root canal at 3mm from apex in mandibular first molars. Sixty mandibular first molars were randomly selected. The apical anatomy of 60 mandibular first molars was investigated by means of a stereo microscope (60x magnification). The results were as follows; 1. There was a high percentage of two physiological foramina in mesial (61.67%) and one foramen in distal(71.66%) roots of mandibular first molars. 2. There was a high frequency of accessory foramina in mesial roots with one foramen (26.07%). 3. The diameters of physiological foramen was as follows: - 0.329mm in single mesial foramen - 0.266mm in mesiobuccal foramen and 0.246mm in mesiolingual foramen - 0.375mm in single distal foramen - 0.291mm in distobuccal foramen and 0.237mm in distolingual foramen 4. The most common physiological foramen shape was oval (69.93%). 5. The incidence of isthmus in mesial root at 3mm from apex was 55%. The 3mm-sections contained a complete isthmus 31.66% and a partial isthmus 23.34%. 6. 3mm from the apex, the most common canal shape was oval (50.64%). Knowledge of the apical anatomy of mandibular first molar would be necessary for success of surgical and nonsurgical endodontic treatment.

• Journal of Veterinary Clinics
• /
• v.18 no.4
• /
• pp.397-401
• /
• 2001

Blood gas values such as pO$_2$ were studied in common marmosets, crab-eating macaques and Japanese macaques, rhesus macaques and celebes macaque reared in Korea. Blood pH and blood gas values were evaluated in both arterial and venous blood. pH, p$CO_2$, and pO$_2$, of arterial blood in common marmosets were measured as 7.4$\pm$0.1, 29.2$\pm$3.6 mmHg and 81.5$\pm$8.9 mmHg, respectively. Corresponding values in one crab-eating macaque were 7.3, 41.3 mmHg and 46.5 mmHg, respectively. In case of venous blood, pH, p$CO_2$, and pO$_2$, in common marmosets were observed as 7.2$\pm$0.2, 64.9$\pm$18.3 mmHg and 23.5$\pm$5.4 mmHg, respectively. On the while, pH, p$CO_2$, and pO$_2$, of venous blood in crab-eating macaques showed 7.2$\pm$0.2, 49.9$\pm$8.0 mmHg and 38.3$\pm$8.8 mmHg, respectively. Venous pH, p$CO_2$, and pO$_2$, in Japanese macaques were 7.1$\pm$0.2, 56.4$\pm$5.3 mmHg and 40.1$\pm$9.3 mmHg, respectively. Those values in one rhesus macaque were 7.2, 61.1 mmHg and 24.9 mmHg, and in celebes macaque were 7.1, 54.3 mmHg and 31.8 mmHg, respectively.