• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.249-250
• /
• 2002

In this paper, the relationship among the 3-D surface topography parameters are studied. Several surface topography parameters that are important in tribology are calculated against various surface topography data. 3-D surface data with desired properties are generated by using the non-causal 2-D auto-regressive (AR) model. The non-causal 2-D AR model is a random 3-D surface topography model that can generate 3-D surface topography data with specified parameters.

• 한국시뮬레이션학회논문지
• /
• 제17권2호
• /
• pp.1-12
• /
• 2008

자동차 엔진을 구성하는 주요부품은 실린더블록, 실린더헤드, 크랭크샤프트, 커넥팅로드, 캠샤프트 등으로 구성되는데 이들의 영문명을 따서 5C라고 부른다. 따라서 일반적으로 엔진공장은 5C를 생산하는 라인과, 엔진 조립라인을 포함하는 6개의 라인으로 구성이 된다. 엔진공장은 소품종대량생산의 특성을 가지기 때문에 장비의 배치형태는 흐름라인의 형태를 따른다. 본 논문에서는 국내 자동차 회사 엔진공장의 크랭크샤프트라인 설계를 위한 시뮬레이션 사례를 소개한다. 크랭크샤프트 라인은 기계가공을 중심으로 하는 라인이다. 따라서 라인설계에 영향을 미치는 요인들에 대해 소개하고, 라인 효율에 미치는 영향을 $QUEST^{(R)}$라는 3차원 시뮬레이션 도구를 이용하여 분석하였다. 기술팀에서 제시한 초기배치안에 대해 시뮬레이션 모델을 구축한 후 실험을 통하여 시스템 효율을 개선시키기 위한 방법을 제시하였다.

• 한국안전학회지
• /
• 제22권2호
• /
• pp.41-46
• /
• 2007

This paper considers the electrical shock risk of the human body due to underwater leakage current in such places of public baths. Many submerged electric facilities in a public bath may create a severe electric shock hazard for the human body, since wet body in an accidentally energized bathtub can result in low electrical resistance through the human body for leakage or fault currents. Therefore a major consideration, in the context of electrical safety underwater, is the shock risk to the bather as a result of electric current flowing through the water in bathtub. To assess the electric shock risk and to analyze the potential distribution in a bathtub, 2 different situation cases are set up, then experimental and simulation methods are adopted. The validity of 2 cases of simulation and experiment data in a bathtub for electric distribution underwater are compared and analyzed. Also electric shock risk assessment underwater in a real public bathtub by simulation program package, Flux 3D, was conducted herein, and the results are presented and discussed.

• Wind and Structures
• /
• 제22권1호
• /
• pp.17-41
• /
• 2016

To address the uncertainty of the flight trajectories caused by the turbulence and gustiness of the wind field over the roof and in the wake of a building, a 3-D probabilistic trajectory model of flat-type wind-borne debris is developed in this study. The core of this methodology is a 6 degree-of-freedom deterministic model, derived from the governing equations of motion of the debris, and a Monte Carlo simulation engine used to account for the uncertainty resulting from vertical and lateral gust wind velocity components. The influence of several parameters, including initial wind speed, time step, gust sampling frequency, number of Monte Carlo simulations, and the extreme gust factor, on the accuracy of the proposed model is examined. For the purpose of validation and calibration, the simulated results from the 3-D probabilistic trajectory model are compared against the available wind tunnel test data. Results show that the maximum relative error between the simulated and wind tunnel test results of the average longitudinal position is about 20%, implying that the probabilistic model provides a reliable and effective means to predict the 3-D flight of the plate-type wind-borne debris.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.75-81
• /
• 2021

첨단 정보통신 기술의 발달에 따라 디지털 문화에 익숙한 Z세대는 미래 패션을 재편할 수 있는 패션 산업의 주요 소비층으로 관심이 집중되고 있다. 본 연구에서는 디지털 기기에 능숙하고 인터넷을 통한 정보 습득 및 모바일 라이프스타일에 친숙한 Z세대를 위한 캐쥬얼웨어를 3D 가상 시뮬레이션에 의해 디자인하여 걸리쉬, 스포티브, 이지, 컨템포러리의 4가지 룩으로 디자인 전개하였다. 의상디자인에 3D 가상 착의 시뮬레이션의 활용은 팬데믹 환경에서 디지털 패션 디자인기획 및 생산 프로세스와의 융합을 통한 미래 패션 산업의 디지털화를 구축하고 온라인 플랫폼의 유통을 강화시킬 수 있다. 언택트 패션 제작 시스템을 도입하여 업무의 효율성 강화를 위한 지속적인 혁신을 시도하고 있는 기업 환경에서 3D 가상의상 기술의 활용은 3D 샘플 제작, 온라인 피팅, 수정과 보정 및 품평을 통해 업무 프로세스에서 소통이 확대되고 인적, 물적 자원의 경감에 따른 긍정적 효과를 통해 지속 가능한 패션의 가치를 확대시킬 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.123-126
• /
• 2005

In this paper, we propose a multiple slotted dual-band square patch antenna with CP(Circular Polarization) characteristic. And we present the simulation and measurement results of the design example. We designed a slotted patch antenna by using computer simulation program, Zeland IE3D, and then some tuning followed with measurements. Measured -10dB bandwidths of $S_{11}$ characteristic are 127MHz($2.346GHz{\sim}2.473GHz$) for the low-band, and 122MHz($3.379GHz{\sim}3.501GHz$) for the high-band, respectively. And measured maximum gains and half-power beamwidths are 6.94dBi, $72.95^{\circ}$ for the low-band at 2.30GHz, 5.78dBi, $76.51^{\circ}$ for the high-band at 3.45GHz, respectively.

• Journal of International Society for Simulation Surgery
• /
• 제1권1호
• /
• pp.41-44
• /
• 2014

The aim of this report is showing the case that we could give exact navigation of perigastric vessels for gastrectomy with 3D CTA. A 74-year-old male patient visited hospital with gastric cancer. Early gastric cancer, type IIb was found at stomach antrum great curvature side. Before surgery, he underwent 3D CT angiography. 3D volume rendering images and MIP images were made by post processing. He had replaced Lt. hepatic artery arising from Lt. gastric artery. Surgeon could get patient's specific vascular anatomy before surgery including surgically relevant anatomical distance and direction and could finish gastrectomy within 4 hours and just 53ml blood loss.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.114-129
• /
• 2004

The 3D simulations for the Rotary Specimen Rack (RSR), the shielding concret, and the reactor core dismantling processes in the Korea Research Reactor-1&2(KRR-1&2) were carried out in the present work. The four main dismantling items, which are the RSR, reactor core, beam tube, and the thermal column and the shield concrete, were selected among the many components in the KRR-2 by consideration of the activation, worker training, difficulty of the work and so on. On the basis of these, we built 3D CAD models, selected the proper dismantling technologies, and reviewed their dismantling processes. In this study, the 3D simulation results of the shielding concrete, and the reactor core dismantling processes are also presented and discussed.

• 한국CDE학회논문집
• /
• 제4권1호
• /
• pp.1-11
• /
• 1999

surface texture denotes set of tiny repetitive geometric features on an object surface. 3D Printing can readily create a surface of controlled macro-textures of high geometric complexity. Designing surface textures for 3D Printing, however, is difficult due to complex macro-structure of the tiny texture geometry since it needs to be compatible with the non-traditioal manufacturing method. In this paper we propose a visual simulation technique involving development of a virtual model-an intermediate geometric model-of the surface texture design prior to fabricating the physical model. Careful examination of the virtual model before the actual fabrication can help minimize unwanted design iterations. The proposed technique demonstrated visualization capability by comparing the virtual model with the physical model for several test cases.

• Journal of Korean Vacuum Science & Technology
• /
• 제1권1호
• /
• pp.1-12
• /
• 1997

A new three-dimensional (3D) Monte Carlo ion implantation simulator, TRICSI, has been developed to investigate 3D mask effects in the typical mask structure for ion implantation into crystalline silicon. We present the mask corner and mask size effects of implanted boron range profiles, and also show the calculated damage distributions by applying the modified Kinchin-Pease equation in the single-crystal silicon target. The simulator calculates accurately and efficiently the implanted-boron range profiles under the relatively large implanted area, using a newly developed search algorithm for the collision partner in the single-crystal silicon. All of the typical implant parameters such as dose, tilt and rotation angles, in addition to energy can be used for the 3D simulation of ion implantation.