• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.642-649
• /
• 2010

This study was designed to generate briefs pattern for women in their twenties using 3D parametric body model. 151 women in their 20's were random sampled and measured using Martine's anthropometry. And one subject was chosen as the representative subject for 3D scanning. Parametric model was generated of using CATIA P3, Unigraphics NX4.0, Rapidform 2006. And the 3D surface of parametric body model was flattened onto the 2D plane. 3 downscale ratios(0%, 10%, 15%) were applied to generated pattern to figure out what downscale ratio was suitable to make briefs with stretch fabric. 4 kinds of experimental briefs were made with stretch fabrics(0%, 10%, 15% downscale) and worn on the dressform. Subjective evaluation on the appearance was done and the data was analyzed by ANOVA with post-hoc test. Briefs pattern was generated through the process of flattening the parametric surface and arranging the patches to make briefs pattern by dart manipulation. The different ration of outline and area between 3D surface and 2D pattern were 0.22% and 0.09% respectively. It showed that a parametric model could provide a desirable pattern with minute size error. The results of subjective evaluation on the appearance of 4 experimental briefs showed that stretch briefs with 15% downscale ratio was evaluated most highly in most items. Findings imply that it is feasible to apply 3D parametric model to generate patterns for various items considering various fabric properties.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.1
• /
• pp.6-14
• /
• 2012

For integrated complementary metal oxide semiconductor (CMOS) circuits, the lateral spread for two-dimensional (2-D) impurity distributions are very important for the analyzing the devices. The measured two-dimensional SEM data obtained using the chemical etching-method matched very well with the results of the Gauss model for boron implanted samples. But the profiles in boron implanted silicon were deviated from the Gauss model. The profiles in boron implanted silicon were shown a little bit steep profile in the deep region due to backscattering effect on the near surface from the bombardments of light boron ions. From the simulated 3-D data obtained using an analytical model, the 1-D and 2-D data were compared with the experimental data and could be verified the justification from the experimental data. The data of 3-D model were also shown good agreements with the experimental and the simulated data. It can be used in the 3-D chip design and the analysis of microelectro-mecanical system (MEMS) and special devices.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.3
• /
• pp.234-242
• /
• 2010

3D CAD technology has been extended to a medical area including dental clinic beyond industrial design. The 2D images obtained by CT(Computerized Tomography) and MRI(Magnetic Resonance Imaging) are not intuitive, and thus the volume rendering technique, which transforms 2D data into 3D anatomic information, has been in practical use. This paper has focused on a method and its implementation for forming 3D geometric surface model from laminated CT images of the pubis. The implemented system could support a dental clinic to observe and examine the status of a patient's pubis before implant surgery. The supplement of 3D implant model would help dental surgeons settle operation plans more safely and confidently. It also would be utilized with teaching materials for a practice and training.

• Journal of Digital Contents Society
• /
• v.9 no.2
• /
• pp.363-369
• /
• 2008

In this paper, we have proposed 3D shape reconstruction using superquadrics and single z-buffer Constructive Solid Geometry (CSG) rendering algorithm. Superquadrics can obtain various 3D model using 11 parameters and both superquadrics and deformed-superquadrics play a role of primitives which are consisted of CSG tree. In addition, we defined some effective equations using z-buffer algorithm and stencil buffer for synthesizing 3D model. Using this proposed algorithm, we need not to consider the coordinate of each 3D model because we simply compare the depth value of 3D model.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.10 no.3
• /
• pp.11-18
• /
• 2010

Cost estimation through fast and correct quantity take offs are crucial in the process of construction project. The existing methods for cost estimation are mainly based on 2D-based drawings and the estimation result tends to be different according to the estimator's experience, the quality and quantity of used information and estimation time. To solve these problems, the domestic construction industry have recently tried to use the data extracted from 3D data modeling based on BIM(Building Information Modeling) in order to achieve more accurate and objective cost estimation. However it tends to increase dramatically the quantity of information that can be used in cost estimation by estimators. Therefore in order to achieve quality information data from 3D data modeling, the characteristics of the project should be reflected on the 3D model and it is most important to extract information only for cost estimation from the whole 3D model fast and accurately. Thus this study aims to propose the 3D modeling method through Data Normalization which maximizes the usability of 3D Data modeling in cost estimation process.

• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.142-150
• /
• 2009

It is very important to generate a simplified model from a complex 3D character in computer game. We propose a new method of extracting feature lines from a 3D game character. Given an unstructured 3D character model containing texture information, we use model feature map (MFM), which is a 2D map that abstracts the variation of texture and curvature in the 3D character model. The MFM is created from both a texture map and a curvature map, which are produced separately by edge-detection to locate line features. The MFM can be edited interactively using standard image-processing tools. We demonstrate the technique on several data sets, including, but not limited to facial character.

• Journal of KIISE:Databases
• /
• v.29 no.2
• /
• pp.110-118
• /
• 2002

This paper presents a 3-D graphic database system based on XML that supports content-based retrievals of 3-D images, Most of graphics application systems are currently centered around the processing of 2-D images and research works on 3-D graphics are mainly concerned about the visualization aspects of 3-D image. They do not support the semantic modeling of 3-D objects and their spatial relations. In our data model, 3-D images are represented as compositions of 3-D graphic objects with associated spatial relations. Complex 3-D objects are mode]ed using a set of primitive 3-D objects rather than the lines and polygons that are found in traditional graphic systems. This model supports content-based retrievals of scenes containing a particular object or those satisfying certain spatial relations among the objects contained in them. 3-D images are stored in the database as XML documents using 3DGML DTD that are developed for modeling 3-D graphic data. Finally, this paper describes some examples of query executed in our Web-based prototype database system.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.390-397
• /
• 2003

A three-dimensional (3D) inversion technique has been developed for interpretation of magnetotelluric (MT) data. The inversion method is based on the linearized least-squares (Gauss-Newton) method with smoothness regularization. In addition to the underground 3D resistivity distribution, static shifts are also treated as unknown parameters in the inversion. The forward modeling is by the staggered-grid finite difference method. A Bayesian criterion ABle is applied to search the optimum trade-off among the minimization of the data misfit, model roughness and static shifts. The method has been applied to several MT datasets obtained at geothermal fields in Japan and other Asian countries. In this paper, two examples will be discussed: one is the data at the Ogiri geothermal area, southwestern Japan, and the other is at the Pohang low-enthalpy geothermal field, southeastern Korea. The inversion of the Ogiri data has been performed stably, resulting in a good fitting between the observed and computed apparent resistivities and phases. The recovered 3D resistivity structure is generally similar to the two-dimensional (2D) inversion models, although the deeper portion of the 3D model seems to be more realistic than that of the 2D model. The 3D model is also in a good agreement with the geological model of the geothermal reservoirs. 3D interpretation of the Pohang MT data is still preliminary. Although the fitting to the observed data is very good, the preliminary 3D model is not reliable enough because the station coverage is not sufficient for a 3D inversion.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.1
• /
• pp.66-74
• /
• 2019

In the field of shipbuilding design, the use of 3D CAD is becoming commonplace, and most of the large shipyards are conducting 3D design. However at the production site, workers are still working on 2D drawings rather than 3D models. This tendency is even worse in small-scale shipyards and block manufacturing shops. Particularly, in a manufacturing shop that is engaged in the outsourcing of blocks, it may not be possible to provide 3D model. However, the demand for 3D models in the production field is steadily increasing. Therefore, it would be helpful if 3D model could be generated from a 2D drawing. In this paper, we propose a method to extract template and unfolded surface shape information from shell template offset drawing using computer vision technology. Also a 3D surface model was reconstructed and visualized from the extracted information. The result of this study is thought to be helpful in the work environment where 3D model information can not be obtained.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.53-56
• /
• 2005

In this study, the material characterization and the dynamic behavior of 3D orthogonal woven composite materials has been studied under transverse central low-velocity impact condition by means of the micromechanical model using finite elements. To build up the micromechanical model considering tow spacing and waviness, an accurate unit structure is stacked in x-y-z direction repeatedly. First, the mechanical properties of 3D orthogonal woven composites arc obtained by means of virtual experiment using full scale Finite Element Analysis based on the DNS concepts, and the computed elastic properties arc validated by comparison to available experimental results. Second, using the implementation of this validated micromechanical model, 3D transient finite-clement analysis is performed considering contact and impact, and the impact behavior of 3D orthogonal woven composite is investigated. A comparison study with the homogenized model will be carried out in terms of global and local behaviors.