• 한국분무공학회지
• /
• 제11권1호
• /
• pp.39-47
• /
• 2006

In-cylinder flows in a motored 3.5L four-valve SI engine were investigated quantitatively using three-component LDV system, to determine how engine configuration affects the flow field. The purpose of this work was to develop quantitative methods which correlate in-cylinder flows to engine performance. For this study, two distinct intake/piston arrangements were used to examine the flow characteristics. Quantification of the flow field was done by calculating two major parameters which are believed to characterize adequately in-cylinder motion. These quantities were turbulent kinetic energy(TKE) and tumble ratio in each plane at each crank angle. The results showed that in-cylinder flow pattern is dominated by the intake effects and two counter rotating vortices, developed during the intake stroke, produced relatively low tumble ratio. Therefore, the applicability of these quantities should be carefully considered when evaluating characteristics resulting from the complex in-cylinder flow motions.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.825-830
• /
• 2004

A numerical analysis based on two-dimensional and three-dimensional incompressible Navier-Stokes equations has been carried out for double-circular-arc (DCA) compressor cascades. Two types of double-circular-arc cascades were used in this analysis. The appropriate turbulence model for compressor analysis was selected among the conventional turbulence models such as Baldwin-Lomax, k-$\varepsilon$ and k-$\varepsilon$ models. The results of current study were compared with available experimental data at various incidence angles. The 2-D and 3-D computational codes based on SIMPLE/PWIM algorithm for collocated grid and hybrid scheme for the convective terms were the main features of numerical tools. As commonly known, turbulence modeling is very important for the prediction of cascade flows, which are extremely complex with separation and reattachment by adverse pressure gradient. For selection of turbulence model, 2-D analysis was performed. And then, k-$\varepsilon$ turbulence model with wall function chosen as the reasonable turbulence model for 3-D calculation was used to increase the efficiency of computation times. A reasonable result of 3-D flow pattern passing through the double-circular-arc cascade was obtained.

• Korean Chemical Engineering Research
• /
• 제45권1호
• /
• pp.93-102
• /
• 2007

본 연구에서는 직접 메탄올 연료전지의 전기 화학 반응에 의해 발생하는 이산화탄소와 물의 조절을 위해 기체 발생과 흐름 현상을 관찰할 수 있는 3차원 모델을 개발하였다. 산화극 쪽에 발생한 기체의 조절은 직접 메탄올 연료전지를 설계하는데 중요한 문제이며, 연료 전지의 성능에 커다란 영향을 준다. 유로는 기체의 조절과 아주 밀접한 관계가 있으나 다양한 유로를 설계하고 실험하여 최적의 디자인을 찾는 것은 어렵고 바이폴라 플레이트의 높은 가격 때문에 많은 비용이 필요하다. 이 문제를 해결하기 위해 전산 유체역학 모델링 기법을 도입하였다. 전산 유체역학을 기반으로 하여 개발된 two-fluid 모델을 이용하여 유체의 흐름 패턴을 시각화 하여 분석함으로써 실험의 횟수를 줄일 수 있었고, 대표적인 4가지 연료전지 유로인 serpentine, zigzag, parallel, semi-serpentine 형태에 개발된 모델을 적용하여 속도, 압력, 메탄올 몰분율, 기체 몰분율 등을 계산하였다. 계산 결과를 이용하여 각 형태의 특성과 장단점을 파악하였고, 이를 바탕으로 가스를 효율적으로 제거할 수 있는 최적 유로를 설계 하였다.

• 천문학회보
• /
• 제36권2호
• /
• pp.103.1-103.1
• /
• 2011

Recent observations by Hinode show weakly-attenuated coronal loop oscillations in the presence of background flow (Ofman & Wang 2008, A&A, 482, L9). We study the vertical kink oscillations in solar coronal loops, considering field aligned flows inside the loops as well as surrounding the loops environment. The two dimensional numerical model of straight slab is used to explore the excitation and attenuation of the impulsively triggered fast magnetosonic standing kink waves. A full set of time dependent ideal magnetohydrodynamics equations is solved numerically taking into account the value of flow of the order of observed flows detected by SOT/Hinode. We find that relaxing the assumption of the limited flows within the loops enhances the damping rate of the fundamental mode of the standing kink waves by 2 - 3 % as compared to flow pattern which is basically localized within the loops. We further notice that extending the flow pattern beyond the loop thickness also enhances the strength of the shock associated with slow magnetoacoustic waves, recognized as an addition feature detected in the numerical simulation. The wider out-flow pattern destroys the oscillation patterns early as compared to narrower flow pattern, in other words we can say that it affects the durability of the oscillation. However, for the typical coronal loops parameters we find that the observed durability periods of the SOT/Hinode observation can be achieved with an out-flow Gaussian patterns for which half-width is not greater than factor 2.0 of the loop-half-width. explain a possible relation between electric current structure and sigmoid observed in a preflare phase.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.44-51
• /
• 2014

Considering the importance of the detailed resolution of the reacting flow field inside a gasifier, the objective of this study lies on to investigate the effect of important variables to influence on the reacting flow and thereby to clarify the physical feature occurring inside the gasifier using a comprehensive gasifier computer program. Thus, in this study the gasification process of a 1.0 ton/day gasifier are numerically modeled using the Fluent code. And parametric investigation has been made in terms of swirl intensity and aspect ratio of the gasifier. Doing this, special attention is given on the detailed change of the reacting flow field inside a gasifier especially with the change of this kind of design and operation parameters. Based on this study, a number of useful conclusions can be drawn in the view of flow pattern inside gasifier together with the consequence of the gasification process caused by the change of the flow pattern. Especially, swirl effect gives rise to a feature of a central delayed recirculation zone, which is different from the typical strong central recirculation appeared near the inlet nozzle. The delayed feature of central recirculation appearance could be explained by the increased axial momentum due to the substantial amount of the presence of the coal slurry occupying over the entire gasifier in gasification process. Further, the changes of flow pattern are explained in detail with the gasifier aspect ratio. In general, the results obtained are physically acceptable in parametric study.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.239-243
• /
• 2005

Fully three-dimensional Large Eddy Simulation calculations of the flow past 2D cavity are conducted to study the purging of neutrally buoyant or dense miscible contaminants introduced instantaneously inside the cavity. The length to depth ratio(L/D) is 2 and Reynolds number based on the depth is 3,360. Fully developed turbulent inflow are fed at the inlet from precursor simulation of channel flow. Mean flow pattern and unsteady features are investigated based on the experimental data of Pereira and Sousa. From the study of mass exchange processes, it is found that the mechanism of removal of the contaminant is very different between the non-buoyant and buoyant cases. In the buoyant case, internal wave motion which interacts with a strong cavity vortex is dominant in the ejection mechanism of the contaminants.

• 한국수자원학회논문집
• /
• 제54권11호
• /
• pp.985-998
• /
• 2021

일반적으로 상류의 댐은 하류 유황을 자연 상태에서 발전방류 조건으로 심각하게 변화시킨다. 본 연구에서는 물리서식처모의를 통하여 국내 조절하천에서 자연유황 패턴이 하류의 어류 서식처에 미치는 영향을 조사하였다. 연구 대상하도는 금강의 용담댐 하류 13.4 km 구간으로 설정하였다. 현장조사 결과, 대상하도에서 피라미, 쉬리, 그리고 끄리가 우점하고 있는 것으로 나타났으며, 이들이 전체의 70%를 차지하고 있는 것으로 파악되었다. 이중 끄리는 금강에 서식하는 토착어종이다. 이들 3종을 물리서식처모의를 위한 대상어종으로 선정하였다. 수리해석과 서식처모의를 위하여 2차원 천수방정식에 기반한 Nays2D 모형과 HIS 모형을 각각 사용하였다. 자연 유황에 따른 영향을 검토하기 위하여, 본 연구에서는 댐 유입 유량과 발전유량을 이용하였다. 물리서식처모의 결과, 자연유황 조건에서 대상하도의 복합서식처지수가 크게 증가하는 것으로 나타났다. 그리고 BBA 방법을 이용하여 대상하도에 자연유황에 대한 댐 운영 시나리오를 제시하였다. 시나리오 1을 위하여 유입유량의 양과 지속기간을 고려하는 수문학적 방법을 이용하였고, 시나리오 2는 유입유량을 월별로 평균하여 구축하였다. 시나리오 1과 시나리오 2를 통해서 구현된 자연유황 조건이 발전방류에 비해 가중가용면적을 크게 증가시키는 것으로 나타났다. 결과적으로 댐 운영을 자연유황 조건으로 변환시켜 방류하였을 때 하류의 어류 서식처를 개선하는데 도움이 되는 것으로 확인되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1876-1878
• /
• 1999

Developed was a 5kW-class polymer electrolyte membrane fuel cell(PEMFC) system comprised of fuel cell stack, fuel processing, thermal and water management subsystems and ancillary equipments. Several large single cells have been fabricated with different gas flow field patterns and paths, and the gas flow field pattern for the stack has been determined based on the single cell performance of thin film membrane electrode assembly (MEA). The PEMFC stack was consisted of 100 cells with an electrode area of $300cm^2$, having serpentine flow pattern. Fuel processing was developed including an autothermal methanol reformer and two preferential CO oxidation reactors. The fuel processing was combined to PEMFC operation system consisted of air compressor and thermal and water management subsystems. The PEMFC stack showed performance of 5kW under the supply of $H_2$ and air, but its performance was lowered to 3.5kW under the supply of reformed gas.

• 대한기계학회논문집B
• /
• 제30권12호
• /
• pp.1218-1227
• /
• 2006

In this paper a parametric study using an immersed boundary method has been carried out to investigate the effects of stable density stratification on the wakes past two identical three-dimensional hills aligned in tandem. The Reynolds number based on the uniform inlet velocity and twice the hill height was fixed at Re=300 while the Froude number based on the inlet velocity and the hill height was retained at Fr=0.2. Neutral flow without density stratification was also computed for comparison. Under a strong stratification, vertical motion of fluid particles over the three-dimensional hills is suppressed and the wake structures behind the hills become planar. Depending on the distance between the two hills, the flow pattern of each wake is significantly affected by the stratification. There is a critical hill distance at which flow characteristics drastically change. Qualitative and quantitative features of the wake interaction are reported.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.264-270
• /
• 2011

본 연구는 직렬배열 상태에 놓인 3원주 주위의 유동장 특성을 PIV를 이용하여 파악한 것이다. 실험은 레이놀즈수 Re=$3.0{\times}10^3{\sim}5.0{\times}10^3$ 범위 내에서 수평간격비(P/D)를 P/D=1.25~3.75로 변화시켜가며 행하였다. 각각의 실험 파라메터에서 Strouhal 수, 와도변화, 순간 및 평균 속도벡터 및 속도분포를 측정하였으며 그 결과를 요약하면 다음과 같다. 3번째 원주 후방에서 측정한 Strouhal 수는 수평간격비 P/D에 따라 크게 3가지 영역으로 구분되며, 각 원주의 후류에서의 흐름 패턴은 이들 영역에 따라 달랐다. 각 원주 후방에서 시간평균 흐름은 거의 정체상태에 있었으며, 그 정체영역의 크기는 1번째, 2번째, 3번째 원주 순으로 작았다. 2번째 원주 전, 후방 영역에서는 받음각 미소 (${\alpha}= {\pm}5^{\circ}$)에 따라 서로 반대방향의 볼텍스가 형성했다.