• Journal of radiological science and technology
• /
• v.1 no.1
• /
• pp.15-24
• /
• 1978

The characteristics of the rare earth phosphors intensifying screen (LM-6, Grenex-8) as compared with $CaWO_4$ intensifying screen had been studied utilizing several common x-ray films, and found the following results. 1. Compared with the conventional CaWO4 intensifying screen, the rare earth phosphors intensifying screen was found to be more sensitive over to 1.26-3.47 times. So the radiation exposure could be reduced to 1/1.26 -1/3.47. 2. Sharpness as well as the film speed were both increased. So the motion blurring and geometrical unsharpness could be decreased. 3. In spite of that the film speed was increased, photographic contrast was kept up. Therefore, the more ideal film of greater latitude could be obtained. 4. The effects of the rare earth phosphors intensifying screen would be much increased as using with orthochromatic x-ray films.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.50-56
• /
• 1972

This study has been carried out to observe the driving and the intercepting effects of air screen on some sea-water fishes ; Chrysophrys major, Mylio macrocephalus, Fugu pardalis. 1. By perforating fine holes on the compressed air pipes, air screen was formed in the water, and this screen was set at $45^{\circ}$, and $90^{\circ}$ against the fish passage to observe the reactions on the part of the fish. 2. Changes were given to the location of the air screen in the water to observe how the air screen drived the fish to its direction. 3. The effective distance between holes on the air piprs was determined by a series of experiments of setting up two air screens of various types in hole distance, by moving a screen to-ward the other, and of observing the distance between two screens when fish eseape through the space. The results of the above experiments observed as follows were : 1. The passage of fish was effectively intercepted by setting up the air screens at 45 degrees against the fish passage and it was also intercepted when the screen was set at 90 degrees against the passage. 2. Fish could be driven by moving the air screen toward the fish. 3. The air screen formed from the pipe above than 0.3mm in diameter was effective, but less than 0.2mm was not sufficiently effective. 4. The strength of the air pressure in the pipe should be higher than $0.087kg/cm^2$. 5. The fish holding ability to obtain effective air screen was ranged as following when the air pressure was $0.160kg/cm^2$. and the hole diameter was 0.3mm on the 12.6mm pipe, depending upon the intervals of the holes on the pipe: The shortest distance which could hold fish between two screens was 59.4cm when the holes were perforated at every 40cm; 33.5cm when at every 30cm; 28.75cm when at every 10cm: and 27.25cm when at every 5cm. Thus, no significant change was at served when the holes were perforated more densely than 30cm intervals. Therefor the hole intervals should be 30cm in designing fishing gear employing air screen.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.590-598
• /
• 1988

Viscous flows through a screen normal to an uniform flow are numerically simulated. A .kappa.-.epsilon. model is adopted for evaluation of the Reynolds stresses. The existence of a screen is regarded as extra sources in the momentum equations. The amount of extra sources is related to the resistance coefficient and the refraction coefficient of the screen. Flows are numerically simulated for various resistance coefficients and heights of the screen and Reynolds numbers. The present method has been verified to reasonably simulate viscous wakes and shear layers of the screen, for which the inviscid theory is quite limitted. As the fluids approach the screen, the velocity is reduced and the pressure is raised to satisfy the Bernoulli equation. After passing the screen, the velocity shows its minimum value at the down-stream, but static pressure is slowly recovered. A detached separation-bubble from the screen appears as the resistance coefficient is increased to a certain level. Such results are qualitatively in agreement with limitted experimental data available. The turbulent kinetic energy shows its maximum value at further down stream and decrease thereafter.

• Journal of Korea Game Society
• /
• v.16 no.3
• /
• pp.117-126
• /
• 2016

Screen climbing is a kind of screen sports. In screen climbing, the software program is executed in a computer system and climbing is progressed by the interaction between a climber and the content of the screen. We implemented a screen climbing game with the ancient cave exploration considering the development of children and the children's motivation to sports climbing. The content of the game is projected to the artificial climb wall and the interaction between a user and the game is done by a user's input of Kinect's depth data. The game is popular with the children in the children's exhibition event. There should be implemented more screen climbing game.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.23-31
• /
• 2021

We propose a wheel screen type Lamina 3D display, which realizes a 3D image that can satisfy the accommodation cue by projecting volumetric images encoded by varying polarization states to a multilayered screen. The proposed system is composed of two parts: an encoding part that converts depth information to states of polarization and a decoding part that projects depth images to the corresponded diffusing layer. Though the basic principle of Lamina displays has already been verified by previous studies, those schemes suffered from a bottleneck of inferior resolution of the 3D image due to the blurring on the surfaces of diffusing layers in the stacked volume. In this paper, we propose a new structure to implement the decoding part by adopting a form of the wheel screen. Experimental verification is also provided to support the proposed principle.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.2
• /
• pp.137-143
• /
• 2015

This thesis focuses on the 3D interface tab page type and mode of screen that affect the usability of the small screen devices such as smartphone. The experiments examined eight 3D UI designs, combinations of two modes (Portrait, Landscape) of screen, and four types (Vertical data mountain, Horizontal data mountain, Vertical carousel, Horizontal carousel). Twenty-six participants participated in the experiment. The completion time, preference and fun score were measured. The results showed that the vertical data mountain type provide the best performance in terms of the all conditions. The results of this study suggest a practical approach for the 3D UI tab page design for the small screen devices.

• The Pure and Applied Mathematics
• /
• v.16 no.3
• /
• pp.271-276
• /
• 2009

We study the geometry of screen conformal light like hypersurfaces M of a semi- Riemannian manifold M. The main result is a characterization theorem for screen conformal lightlike hypersurfaces of a semi-Riemannian space form.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.921-925
• /
• 2000

Characteristics of Pb(Mg, Nb)O$_3$-Pb(Zr, Ti)O$_3$system thick films fabricated by a screen printing method were investigated. The buffer layer were coated with various thickness of Ag-Pd by screen printing to investigate the effect as a diffusion barrier and deposited Pt as a electrode by sputtering on Ag-Pb layer. The printed thick films were burned out at 650$\^{C}$ and sintered at 950$\^{C}$ in O$_2$condition for each 20, 60min after printing with 350mesh screen. The thickness of piezoelectric thick film was 15∼20㎛ and Ag-Pb layer acted as a diffusion barrier above 3㎛ thickness. The PMN-PZT thick films were screen printed on Pt/Ag-Pb(6m) and sintered by 2nd step (650$\^{C}$/20min and 950$\^{C}$/1h) using paste mixed PMN-PZT and binder in the ratio of 70:30, and the remnant polarization of thick film was 9.1$\mu$C/㎠ in this conditions.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.1018-1023
• /
• 2012

Smartphone is integrated into the daily lives of all types of people not even young generation. A touch screen display is a primary input device of a smart phone, a tablet computer, etc. While there are many tough technologies in existence, resistive and capacitive are dominant and currently lead the touch screen panel industry. And a capacitive touch screen panel widely used in smart phones is coated with a material that stores electrical charges. In this study, we tried to manufacture gloves produced with electro-conducting leather as a tool to operate a touch panel screen. Therefore, electrically conductive materials, Polyaniline(PANI), Poly(3,4-ethylenedioxythiophene) (PEDOT), and Carbon nanotubes (CNT) were applied to the surface of leather to be used as a touching operator for capacitive touch screen panel. The leather samples were treated by simple painting method; firstly, they were painted with aqueous solution containing each of the electrically conductive materials and then dried. This cycle was repeated three times. Consequently, the treated leather samples showed electrical conductivity and reasonable working performance to the capacitive touch screen. And, PANI showed the best performance and highest electrical conductivity, and then PEDOT and, CNT in decreasing order. This is because the solubilities of PANI and PEDOT show higher than dispersibility of CNT. Thus, the concentration of conducting polymers was greater than that of CNT in the treating solutions.

• Journal of Multimedia Information System
• /
• v.3 no.4
• /
• pp.111-118
• /
• 2016

Today, the proliferation of various mobile devices, such as smart phones and tablet PC, brought changes in the existing TV viewing behavior. People use smart devices as secondary device while watching TV. Researches on a wide range of services linked with second-screen devices around the smart TV in the home network have been actively conducted. While there exist several Web-related technologies for connections between devices, specialized techniques for a second screen service are quite insufficient. There are still some problems related to the display of contents from multiple devices and the efficient transfer of these contents. Considering the characteristics of broadcasting systems In this study, we focus on a second screen service that permits a dynamic transfer of contents by connecting a television (TV) with mobile devices. Here, we propose a second screen service model to enable the personalization of TV contents by combining the existing broadcasting and Web-related techniques.