• Transactions of Materials Processing
• /
• v.17 no.3
• /
• pp.197-202
• /
• 2008

The control of springback is very important in sheet metal forming since springback affects the dimensional inaccuracy of product. The object of this study is to design the manufacturing process for the improvement of the performance of seat rail by DP780. The influence of process variables such as bend angle and pad force on the springback has been firstly investigated through the comparison between the results of FE-analysis and trial out for initial design based on designer's experience. The process variables of the initial design have been modified in order to improve the dimensional accuracy of seat rail from the prediction of springback by FE-analysis. It was shown from experiment that the improved design satisfied the required specifications such as the dimensional accuracy and the strength of seat rail.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.6
• /
• pp.618-624
• /
• 1998

The culture conditions for Bacillus sp. DP-152 in the flask were investigated for the production of polysaccharide locculant, DP-152. The optimum pH and temperature for the locculant production were 8.0 and $30^{\circ}C$, respectively. The avorable substrates for flocculant production were soluble tarch and ammonium nitrate. The medium composition was optimized as follows: 30 g soluble starch, 0.75 g $NH_4NO_3,\; 2.0g\; K_2\;HPO_4,\; 0.1\; g KH_2PO_4,\; 0.2g\; MgSO_4.\; 7H_2O,\; and\; 0.2g\; MnSO_4~5H_2O$ in 11 of distilled water. Under this optimized condition, flocculating activity has been improved 4-fold compared with that of the basal medium. In the culture flask, the highest flocculating activity was obtained after 70 h of cultivation and the amount of bioflocculant DP-152 yielded was 12.4 g/$\ell$. The solution of bioflocculant DP-152 showed non-Newtonian characteristics. Bioflocculant DP-152 exhibited apparently higher viscosity at all concentrations compared to that of zooglan (from Zoogloea ramigera), and it was stable over a wide range of temperatures and pHs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.365-372
• /
• 2004

The laser welding and its analysis were carried out using high power 6kW $CO_2$ laser for high strength steels such as DP, TRIP and conventional high strength steels. Bead on plate welding of thin sheet was examined to investigate the effect of weld variables of laser welding, and to obtain optimum welding condition. In order to investigate the formability of welded high strength steels, LDH test was added on this work. At high welding speed, the partial penetration was obtained by low heat input. Meanwhile, porosity was formed in the bead at low weld speed because of extremely higher heat input. The optimum welding condition of welding was derived from bead width, penetration and hardness property. It was shown that the DP steels had lower porosity level and smooth bead shape, therefore better laser weldability than TRIP steels and conventional high strength steels. In addition, LDH test shows that the welded DP steels have about $90\%$ formability value of base metal, although TRIP steel and conventional high strength steels have about $80\%$ formability value of its base metal.

• Journal of Korea Water Resources Association
• /
• v.47 no.8
• /
• pp.671-684
• /
• 2014

Change point analysis is a efficient tool to understand the fundamental information in hydro-meteorological data such as rainfall, discharge, temperature etc. Especially, this fundamental information to change points to future rainfall data identified by reasonable detection skills can affect the prediction of flood and drought occurrence because well detected change points provide a key to resolve the non-stationary or inhomogeneous problem by climate change. Therefore, in this study, the comparative study to assess the performance of the 3 change point detection skills, cumulative sum (CUSUM) method, Bayesian change point (BCP) method, and segmentation by dynamic programming (DP) was performed. After assessment of the performance of the proposed detection skills using the 3 types of the synthetic series, the 2 reasonable detection skills were applied to the observed and future rainfall data at the 5 rainfall gauges in South Korea. Finally, it was suggested that BCP (with 0.9 posterior probability) could be best detection skill and DP could be reasonably recommended through the comparative study. Also it was suggested that BCP (with 0.9 posterior probability) and DP detection skills to find some change points could be reasonable at the North-eastern part in South Korea. In future, the results in this study can be efficiently used to resolve the non-stationary problems in hydrological modeling considering inhomogeneity or nonstationarity.

• Progress in Medical Physics
• /
• v.27 no.2
• /
• pp.64-71
• /
• 2016

We develop a manufacture procedure for the production of a patient specific customized bolus (PSCB) using a 3D printer (3DP). The dosimetric accuracy of the 3D-PSCB is evaluated for electron beam therapy. In order to cover the required planning target volume (PTV), we select the proper electron beam energy and the field size through initial dose calculation using a treatment planning system. The PSCB is delineated based on the initial dose distribution. The dose calculation is repeated after applying the PSCB. We iteratively fine-tune the PSCB shape until the plan quality is sufficient to meet the required clinical criteria. Then the contour data of the PSCB is transferred to an in-house conversion software through the DICOMRT protocol. This contour data is converted into the 3DP data format, STereoLithography data format and then printed using a 3DP. Two virtual patients, having concave and convex shapes, were generated with a virtual PTV and an organ at risk (OAR). Then, two corresponding electron treatment plans with and without a PSCB were generated to evaluate the dosimetric effect of the PSCB. The dosimetric characteristics and dose volume histograms for the PTV and OAR are compared in both plans. Film dosimetry is performed to verify the dosimetric accuracy of the 3D-PSCB. The calculated planar dose distribution is compared to that measured using film dosimetry taken from the beam central axis. We compare the percent depth dose curve and gamma analysis (the dose difference is 3%, and the distance to agreement is 3 mm) results. No significant difference in the PTV dose is observed in the plan with the PSCB compared to that without the PSCB. The maximum, minimum, and mean doses of the OAR in the plan with the PSCB were significantly reduced by 9.7%, 36.6%, and 28.3%, respectively, compared to those in the plan without the PSCB. By applying the PSCB, the OAR volumes receiving 90% and 80% of the prescribed dose were reduced from $14.40cm^3$ to $0.1cm^3$ and from $42.6cm^3$ to $3.7cm^3$, respectively, in comparison to that without using the PSCB. The gamma pass rates of the concave and convex plans were 95% and 98%, respectively. A new procedure of the fabrication of a PSCB is developed using a 3DP. We confirm the usefulness and dosimetric accuracy of the 3D-PSCB for the clinical use. Thus, rapidly advancing 3DP technology is able to ease and expand clinical implementation of the PSCB.

• Journal of Veterinary Clinics
• /
• v.18 no.4
• /
• pp.402-410
• /
• 2001

This study was performed to investigate the hemodynamic changes which occur after occlusion of coronary artery and relation to reperfusion arrhythmias(RA) which occur when occlusion materials were removed form coronary artery in dogs. The occlusion of coronary artery was designed by temporary ligation of left circumflex branch of coronary artery during 30 minutes in 16 dogs. During occlusion of coronary artery, cardiac output(CO), mean aortic pressure (mAP), aortic systolic pressure(ASP), aortic diastolic pressure(ADP). left ventricular systolic pressure(LVSP), left ventricular maximum dp/dt (LV max. dp/dt) and left ventricular end-diastolic pressure (LVEDP) were measured. The occurrence of RA were observed for 5 minute after reperfusion by explained of ligation. As a results, cardiac arrest occurred in 4 dogs during occlusion of coronary artery, and RA was not observed in 5 dogs while it was seen in 5 dogs when explained ligation(reperfusion) after 30 minutes, the rest 2 dogs occurred temporary tachycardia. In hemodynamics changes, LVSP decreased by 10.9% and LV max. dp/dt by 5.4 % in comparison to control value which not ligated coronary artery, and LVEDP increased by 73.3%. The CO/min and mAP also decreased by 10.7% and by 11.3% expectedly. In the relationship to occurrence RA and hemodynamics changes, the LVSP and LV max. dp/dt at the time of occlusion in the RA group decreased by 11.9% and 0.8% in comarison to the control value while the decrease was 7.7% and 10% in the non-RA group. But the LVEDP in creased by 109.1% in the RA group while the decreased was 44.6% in the non-RA group. Referring CO/min, the drop was 8.8% in the RA occurrence group and 12.9% in the non-occurence group. These parameters of LVEDP, LV max. dp/dt, and CO were significant difference(p<0.05). The mAP also decreased by 11.9 in the RA group and by 9.8% in the non-RA group, but these defference were not the significant difference.

• Journal of Welding and Joining
• /
• v.31 no.1
• /
• pp.58-64
• /
• 2013

The following results were obtained, microstructures and tensile properties in arc brazed joints of DP(dual phase) steel using Cu-5.3wt%Sn insert metal was investigated as function of brazing current. 1) The Fusion Zone was composed of ${\alpha}Fe+{\gamma}Cu$ and Cu23Sn2. The reason for the formation of these solid solutions. Despite, Fe & Cu were impossible to solid solution at room temperature. It's melting & reaction to something of insert metal & Base Metal (DP Steel) by Arc. Brazing Process has faster cooling rate then Cast Process, Supersaturated solid solution at room temperature. 2) The increase Hardness of Fusion Zone was directly proportional to the rise of welding current. Because, ${\alpha}Fe+{\gamma}Cu$ phase (higher hardness than the Cu23Sn2.(104.1Hv < 271.9Hv)) Volume fraction was Growth, due to increasing the amount of base metal melting by High current. 3) The results of tensile shear test by Brazing, All specimens happen to fracture in Fusion Zone. On the other hand, when Brazing Current increasing tend to rise tensile load. but it was very small, about 26-30% of the base metal. 4) The result of fracture analysis, The crack initiate at Triple Point for meet to Upper B.M/Under B.M/Fusion Zone. This Crack propagated to Fusion zone. So ruptured by tensile strength. The Reason to in the fusion zone fracture, Fusion zone by Brazing of hardness (strength) was very lower then the base metal (DP steel). In addition the Fusion Zone's thickness in triple point was thin than the base metal's thickness in triple point.

• Journal of fish pathology
• /
• v.19 no.1
• /
• pp.45-54
• /
• 2006

The immunogenicity of Edwardsiella tarda was surveyed under two different culture conditions. In SDS-PAGE patterns of the outer membrane proteins (OMPs) extracts of E. tarda, grown under Trypic soy broth (TSB) and TSB supplemented iron chelate 2,2‘-dipyridyl iron-restricted condition, were examined. The results showed that the iron-regulated outer membrane protein (IROMPs) with molecular masses of 68 and 73 kDa were expressed by bacteria grown in iron-chelate TSB.The pathogenicity was examined by intraperitoneal injection with live E. tarda grown under TSB, iron-chelate TSB and iron-supplemented TSB. The result of pathogenicity test showed significantly high mortality in the group of live E. tarda grown under iron-chelate TSB.The effect of formalin killed cell (FKC) of TSB cultured bacteria and 2,2'-dipyridyl FKC (DP-FKC) of cultured bacteria on the iron-chelate TSB on the development of protective immunity in olive flounder was studied. The level of immune response was evaluated with immunized fish at 1, 2, 3 and 4 weeks after immunization. The numbers of specific antibody secreting cells (SASCs) showed significantly increased level at 2 week after immunization in each group. The agglutination titre of immunized fish was significantly high level at 3 weeks after immunization.The level of protection in olive flounder at 1, 2, 3 and 4 weeks after vaccination was examined by intraperitoneal challenge test with live E. tarda.

• Journal of Chest Surgery
• /
• v.29 no.10
• /
• pp.1055-1065
• /
• 1996

This experiment was undertaken to assess the effect of nitric oxide, isosorbide dinitrate, and sodium nitroprusside, which are known to increase coronary flow by vasodilation and to improve the cardiac function of an ischemic heart The experiment was carried out to investigate the effect of nitric oxide on the coronary artery of an ischemic rat myocardium using isolated constant pressure Langendorfr system. The experimental parameters were lactate and CK-MB for the frozen myocardium and coronary flow. the quantity of coyonary flow, left ventricular developed pressure (LVDP), and dp/dt. The experimental groups were decided as control group (Group I), nitric oxide group (Group II), Iso orbide dinitrate group (Group III) and sodium nitroprusside group (Group IV). Statistical analysis was performed using repeated measured analysis of variance and 2tudent t-test The results were as follows: 1 . The lactic acid contents of group II and IV were less than other groups for the frozen myocardium at preischemic state (p< 0.0025), whereas the determined coronary flows were higher. 2. In the ratio of produced lactic acid between the preischemia and reperfusion for the coronary flow, group II and IV exhibitrod less value than others (p< 0.005). 3. Group II and III were less than others in the coronary flow for the quantity of CK-MB, but or the frozen myocardium, group II and IV were less. 4. Group II and IV showed higher coronary flow compared to others throughout entire experimental period (p< 0.005). 5. Group II was highest at the preischemic state for the left ventricular developed pressure. 6. The +maximal dp/dt of group II was highest compared to others. 7. Group I exhibi ed the highest recovery rate of coronary flow between prelschemla and reperfusion. 8. The(-dp/dt)1(+dp/dt) ratio was 116%, 100%, 100%, and 55% for the 4 groups, respectively And the recovery rate of total dp/dt was 34%, 67%, 51%, and 76% for the four groups, respectively.

• Solar Energy
• /
• v.15 no.3
• /
• pp.105-117
• /
• 1995

Heat transfer coefficients on a single spiral coil tube in the furan foundry sand fluidized bed have been investigated. Heat transfer coefficients(ho) to an immersed single spiral coil tube were measured in the bed. The bed diameter was 0.21 m. The following quantities were varied: (l)bed temperature, (2)mean particle diameter, (3) fluidization rate, (4)the ratio of heated coil tube pitch to diameter(p/Do), and (5)the ratio of heated coil tube pitch to mean particle diameter(p/dp). In addition, the experimental values of maximum Nusselts number were compared with the values of maximum Nusselts number predicted by the existing correlations. The values of heat transfer coefficient increase with the increase in bed temperature and fluidization rate, but decrease with increase in particle diameter. An empirical formulus of maximum Nusselts number which is applicable in the furan foundry sand fluidization bed is as follows: $$Nu_{max}=1.01\;Re^{0.48}Prg^{0.4}(p/dp)^{0.28}(p/Do)^{0.05}$$.