• Korean Journal of Poultry Science
• /
• v.28 no.1
• /
• pp.7-13
• /
• 2001

This study conducted to investigate the effects of feeding Fermkito 50 on the egg production and egg quality hens. One hundred forty four, 50 weeks old ISA brown commercial layer, were used in a 28 d growth assay. Dietary treatments included 1) control(basal diet), 2) FERMO.5(based diet+0.5% Fermkito), 2) FERM1.0(basal diet+1.0% Fermkito), 3) FERM+YU(basal diet+0.5% Fermkito and 0.05% yucca extract). Overall (d 0 to 28), egg production tended to increase as the concentration of Fermkito 50 in the diets was increased without significant difference(P〈0.05). As adding level of Fermkito 50 increased in the diets, egg weight tended to increase. Laying hens fed FERM+YU diet were higher egg weight than laying hens fed control diet(P〈0.05). Egg shell breaking strength was not influenced by Fermkito 50. As adding level of Fermkito 50 was increased in the diets, yolk color tended to increase. Laying hens fed FERM+YU diet had improved egg yolk index compared to laying hens fed control diet. Total-cholesterol of egg yolk in FERM1.0 and FERM+YU treatments was significantly decreased compared to that in control diet(p〈0.05). Total-cholesterol and triglyceride concentrations in serum tended to increase as the concentration of Fermkito 50 in the diets was decreased(P〈0.05). Also, HDL-cholesterol concentration in serum with FERM1.0 and FEUM+YU treatments was significantly higher than control diet(P〈0.05). However, LDL-cholesterol concentration in serum with FERM1.0 and FERM0.5+YU treatments was significantly lower than control diet(P〈0.05). In conclusion, supplemental Fermkito 50 in laying hen diets can be used to improve egg quality.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.271-277
• /
• 2010

In this paper, a numerical model for a Kevlar/Epoxy and Carbon-Kevlar/Epoxy tube used as an energy absorbing component has been developed and then results have been verified through experiment. The 2D shell element and Chang-Chang failure criterion of LS-DYNA that is commercial explicit FE code was used. Mechanical material properties for the model were obtained by material testing in advance. The numerical results were compared with quasi-static test results under axial compressive loading at 10mm/min. From the results, in the case of the Kevlar/Epoxy tube, load-crushed displacement curves were very close to the experiments and SEA (specific energy absorption) shows a good agreement with experimental one within less than 6%. However, the Carbon-Kevlar/Epoxy tube shows some differences with the experimental results.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.199-205
• /
• 2004

With the main objective to know the feasibility of exploitation of F$_1$ hybrids in semi arid and arid climatic conditions of India, the present study was carried out by utilising RD$_1$ as female parent and six bivoltine silkworm breeds viz., CSR$_2$, CSR$_4$, CSR$_{5}$, CSR$_{17}$, CSR$_{18}$ and CSR$_{19}$ along with NB$_4$D$_2$ as male parents. Different hybrids exhibited their superiority for various economic characters during different seasons. Among F$_1$ hybrids, RD$_1$${\times}$CSR$_{5}$ was adjudicated as the best hybrid in terms of expression of significant positive hybrid vigour over mid parental value for five economic characters namely hatching %, cocoon yield, cocoon weight, cocoon shell weight and filament size, highest multiple trait average evaluation index value of 56.77 and comparatively uniform cocoon size with coefficient of variation (CV%) of 3.80 and Standard Deviation (SD) of 7.99 during September - October 2003. Results of the present study revealed that the F$_1$ hybrid RD$_1$${\times}$CSR$_{5}$ can be successfully exploited on commercial in semi arid and arid climatic conditions in India. India.dia.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.2
• /
• pp.131-136
• /
• 2001

Relative growth and composition of larval development stages in brood pouch of the melania snail, Semisulcospira libertina libertina were investigated based on monthly field samples for a year. Total number of specimens examined was 1,200. Size values (mean$\pm$S. D.) of shell height (SH), shell diameter (SD), total weight (TW), meat weight (MW) and shell weight (SW) were $15.96\pm3.41\;mm$, $7.82\pm1.38\;mm$, $0.55\pm0.31\;g$, $0.24\pm0.15\;g$ and $0.39\pm0.23\;g$, respectively, Water temperature (WT) of the sampling site varied from $1.3^{\circ}C\;to\;22.5^{\circ}C$. Relative growth equations among SH, SD, TW, MW and SW of S. libertina libertina specimens pooled were as follows: SD=0,3583SH+2.1648 $(R^2=0.8391)$, $TW=0.0005SH^{2.4853}\;(R^2=0.8391)$,$MW:\;0.0005SH^{2.849}\;(R^2= 0.8391)$ and $SW=0.0004SH^{2.3798}\;(R^2=0.7057)$. Female S. libertina libertina had larvae in its brood pouch throughout the year, Average number of larvae in the brood pouch varied from $91\pm33(July)$ to $396\pm174\;(November)$, decreasing in spring and increasing in autumn. In the monthly composition of larval stage in the brood pouch, trochophore, pre-veliger, veliger and juvenile showed maximum as $66.7\%$ in May, $70.7\%$ in November, $60.9\%$ in February and $13.9\%$ in January, respectively. Percent composition of the juveniles decreased in spring and autumn. In conclusion, S. libertina libertina is likely to have two main parturition periods, March to May and September and October.

• Food Science of Animal Resources
• /
• v.32 no.1
• /
• pp.13-17
• /
• 2012

Two experiments were conducted to investigate the dietary effect of chlorella vulgaris on egg production and lutein incorporation into chicken eggs. In Exp. 1, a total of three hundred, 70 wk-old Hy-Line brown layers were divided into six groups with five replicates and fed each experimental diet (corn-SBM based control diet and diets with 0.1, 0.3 or 0.5% chlorella powder and with 0.8 or 2.4% chlorella cultured media) for 6 wk, respectively. The egg production in the groups fed diets containing the chlorella powder and chlorella cultured media were higher than that of the control group (p<0.001). As dietary chlorella levels increased, the yolk color linearly increased. However, there were no significant differences in egg-shell qualities. The layers fed diet with 2.4% chlorella cultured media showed the highest Haugh unit value. In Exp. 2, a total of one hundred-eight 80 wk-old Hy-Line brown layers were assigned into four groups with three replicates per group (9 birds per replicate). The birds were fed one of four experimental diets (0, 0.5, 1.0 or 2.0% chlorella powder) for 4 wk, followed by a 14 d feeding of a withdrawal diet devoid of chlorella powder. At 2 wk, the lutein greatly increased with increasing levels of chlorella powder in birds fed diets containing more than 1%. The maximum incorporation of lutein into eggs was reached after 2 or 3 wk of feeding diets with chlorella powder. After a 7 d withdrawal, the lutein contents of egg yolks in the groups fed diets with more than 1% chlorella powder were still higher than that of control group (p<0.05). No significant differences in the lutein levels were found among groups after a 14 d withdrawal period. These results indicated that the use of chlorella in layer diets was effective in improving egg production and egg quality and for the production of lutein fortified eggs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.5
• /
• pp.791-795
• /
• 1996

Toha-jeot(salt-fermented Toha shrimp) is a traditional fermented food in Korea. Toha-jeot is fermented for 90 days at $4\pm1^{\circ}C$ with 20%(w/w) salt per live Toha shrimp. We expect that the high polymer chitin of Toha shell will be hydrolyzed by chitinase during the fermentation of Toha-jeot and that the low molecular weight of chitin oligosaccharides will be produced. We experimented 7 samples which were taken at the interval of 15 days during the total 90 days of fermentation. We also measured molecular weight of Toha-chitin, viscosity and molecular weight distribution of chitin during fermentation of Toha-jeot, The decrease of viscosity and average molecular weight of chitin were observed as fermentation proceeds. Chitin oligosaccharide with $10^3molecular$ weight was low until 60 days fer-mentation. However, chitin oligosaccharide with $10^3molecular$ weight was high after 75 days fer-mentation. And chitin oligosaccharide with $10^2molecular$ weight were observed after fermenting Toha for 75 days and 90 days, but chitin oligosaccharide with 10'molecular weight did not appear up to 60 days of fermentation.ation.

• Korean Journal of Poultry Science
• /
• v.35 no.2
• /
• pp.171-176
• /
• 2008

Animal welfare advocates, claim that the induced molting by fasting be avoided. This study was conducted to evaluate the effect of molting induced by various feeding methods on productivity and egg quality in laying hens. We used 400 flocks of 60-week-old leghorn laying hens in four treatments(five replicates of 20 hens each): fasting method (C), feeding single corn grain diet (T1), feeding single wheat bran diet (T2) and feeding single alfalfa meal diet (T3). As the result of the experiment, egg production and daily egg mass significantly decreased only in T1 compared with the control during the $1{\sim}4th$ week after the secondary egg laying (P<0.05). Although the amount of feed intake was significantly less in T1 group during the $1{\sim}4th$ week compared to the control, no significant difference was detected during the total period (P>0.05). In addition, no significant difference of feed conversion was observed between treatment groups. In terms of egg quality, the egg shell thickness was significantly improved in T1 group than the control group by feeding only corn at the 10th and 14th week after the secondary egg laying (P<0.05), but the significant decrease was observed at the corn (T1) and wheat bran (T2) fed treatment groups than the control group at the 26th week of the experiment (P<0.05). The eggshell strength and haugh unit did not show any difference by the molting methods. Egg yolk color was significantly decreased in T1 and T2 group than the control group at the 6th week (P<0.05). However, T1 and T2 group resulted to show significantly high egg yolk color at the 18th week of the experiment (P<0.05). As the result of the experiment, no large difference was observed in the productivity by the feeding molting method and by the fasting induced molting method. In addition, the single diet fed feeding induced molting method by using alfalfa revealed to show more satisfactory trend than the corn or wheat bran single diet fed feeding induced molting methods even if no statistically significant difference was found in terms of egg productivity.

• Earthquakes and Structures
• /
• v.12 no.3
• /
• pp.321-332
• /
• 2017

The reverse fault is a dangerous geological hazard faced by buried steel pipelines. Permanent ground deformation along the fault trace will induce large compressive strain leading to buckling failure of the pipe. A hybrid pipe-shell element based numerical model programed by INP code supported by ABAQUS solver was proposed in this study to explore the strain performance of buried X80 steel pipeline under reverse fault displacement. Accuracy of the numerical model was validated by previous full scale experimental results. Based on this model, parametric analysis was conducted to study the effects of four main kinds of parameters, e.g., pipe parameters, fault parameters, load parameter and soil property parameters, on the strain demand. Based on 2340 peak strain results of various combinations of design parameters, a semi-empirical model for strain demand prediction of X80 pipeline at reverse fault crossings was proposed. In general, reverse faults encountered by pipelines are involved in 3D oblique reverse faults, which can be considered as a combination of reverse fault and strike-slip fault. So a compressive strain demand estimation procedure for X80 pipeline crossing oblique-reverse faults was proposed by combining the presented semi-empirical model and the previous one for compression strike-slip fault (Liu 2016). Accuracy and efficiency of this proposed method was validated by fifteen design cases faced by the Second West to East Gas pipeline. The proposed method can be directly applied to the strain based design of X80 steel pipeline crossing oblique-reverse faults, with much higher efficiency than common numerical models.

• Geotechnical Engineering
• /
• v.13 no.3
• /
• pp.33-52
• /
• 1997

A three dimensional nonlinear finite element analysis is used to study the influence of various design decisions for tieback walls. The numerical model simulates the soldier piles and the tendon bonded length of the anchors with beam elements, the unbonded tendon with a spring element, the wood lagging with the shell elements, and the soil with solid 3D nonlinear elements. The soil model used is a modified hyperbolic model with unloading hysteresis. The complete sequence of construction is simulated including the excavation, and the placement and stressing of the anchors. The numerical model is calibrated against a full scale instrumented tieback wall at the National Geotechnical Experimentation Site (NGES) on the Riverside Campus of Texas A&M University. Then a parametric study is conducted. The results give information on the influence of the following factors on the wall behavior : location of the first anchor, length of the tendon unbonded zone, magnitude of the anchor forces, embedment of the soldier piles, stiffness of the wood lagging, and of the piles. The implications in design are discussed.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.57-57
• /
• 2010

For thin panel welded structure, the various welding distortions were found due to the low resistance against welding deformation. Especially, buckling distortion induced in the thin panel welded structure produce severe problems related to cost in production stage and safety in service life. So, many researches including mechanical and thermal tensioning method for preventing the occurrence of buckling distortion in the production stage have been performed. The purpose of this study is to identify the behavior of longitudinal residual stress at the SA butt weldment with thin plate of 6mm thickness under tension load by 3 dimensional FEA. For it, mesh design for 3D FEA was constructed with 20 nodes brick element for butt weldment and 8 nodes shell element for base metal. According to FEA results, the longitudinal compressive strain inducing tensile residual stress at the butt weldment decreased. It was because the compressive thermal strain in way of weldment was reduced by tension load. The control effect of residual stress increased with an increase in tension load. So, if the amount of tension load applied to the weldment exceeds 1.5 times of longitudinal shrinkage force, the amount of longitudinal residual stress decreased below the critical value inducing the buckling distortion at the SA butt weldment. Its validity was verified by experiment.