• 제목/요약/키워드: 3D-shell

검색결과 468건 처리시간 0.025초

Dynamic Behaviors of Skewed Bridge with PSC Girders Wrapped by Steel Plate

  • Rhee, In-Kyu;Kim, Lee-Hyeon;Kim, Hyun-Min;Lee, Joo-Beom
    • International Journal of Railway
    • /
    • 제3권3호
    • /
    • pp.83-89
    • /
    • 2010
  • This paper attempts to extract the fundamental dynamic properties, i.e. natural frequencies, damping ratios of the 48 m-long, $20^{\circ}$ skewed real bridge with PSC girders wrapped by a steel plate. The forced vibration test is achieved by mounting 12 Hz-capacity of artificial oscillator on the top of bridge deck. The acceleration histories at the 9 different locations of deck surface are recorded using accelerometors. From this full-scaled vibration test, the two possible resonance frequencies are detected at 2.38 Hz and 9.86 Hz of the skewed bridge deck by sweeping a beating frequency up to 12 Hz. The absolute acceleration/energy exhibits much higher in case of higher-order twist mode, 9.86 Hz due to the skewness of bridge deck which leads asymmetric situation of vibration. This implies the test bridge is under swinging vertically in fundamental flexure mode while the bridge is also flickered up and down laterally at 9.86 Hz. This is probably by asymmetric geometry of skewed deck. A detailed 3D beam-shell bridge models using finite elements are performed under a series of train loads for modal dynamic analyses. Thereby, the effect of skewness is examined to clarify the lateral flickering caused by asymmetrical geometry of bridge deck.

  • PDF

먹이생물에 따른 말백합, Meretrix petechialis (Lamarck) 유생의 성장 및 생존 (Growth and Survival of the Hard Clam, Meretrix petechialis (Lamarck) Larvae to Food Organisms)

  • 김태익;고창순;허영백;양문호;장영진
    • 한국패류학회지
    • /
    • 제27권3호
    • /
    • pp.175-180
    • /
    • 2011
  • 본 연구는 말백합의 안정적인 인공종묘생산을 위해 먹이생물의 종류 및 공급량을 조사하였고, 일정기간 절식 후 먹이생물의 재공급에 따른 영향을 관찰하였다. 유생의 먹이생물은 I. galbana, C. calcitrans, N. oculata를 혼합하거나 단독으로 공급할 경우 C. calcitrans를 D형 유생 1개체당 3,000-5,000 세포를 공급하는 것이 가장 효과적이었다. D형 유생을 일정기간 절식 후 먹이생물을 공급한 경우 먹이생물을 공급한 시점부터 4일째에 평균각장 $192.5{\mu}m$ 이상의 침착기 유생으로 성장하였다. 생존율은 절식기간이 길수록 낮아지는 경향을 보였다.

노면조도와 단차를 고려한 2경간연속 판형교의 충격계수에 관한 실험 및 해석적 연구 (An Experimental and Analytical Study on the Impact Factors of Two-Span Continuous Plate Girder Bridge Due to Road Surface Roughness and Bump)

  • 박영석;정태주
    • 한국강구조학회 논문집
    • /
    • 제9권3호통권32호
    • /
    • pp.309-321
    • /
    • 1997
  • 차량이 교량을 통과할 때 교량에 발생하는 충격계수는 교량의 설계시 매우 중요한 인자이다. 본 연구에서는 2연속 강판형교의 지간 중앙점에 발생하는 충격계수에 관한 실험 및 해석적 연구를 수행하였다. 교량의 수치해석시 교량과 차량은 3차원으로 모델링하였으며. 교량의 노면조도는 Intelligent Total Station으로 직접 측정하여 사용하였다. 이때 교량의 주형은 보요소, 콘크리트 바닥판은 쉘요소를 사용하고 주형과 콘크리트 바닥판 사이는 Rigid Link를 사용하여 연결시켰다. 교량과 차량 사이의 상호작용을 고려하여 차량의 운동방정식을 유도하였으며, 차량의 여러 가지 주행속도에 따른 교량의 지간 중앙점에서의 충격계수를 구하여 우리나라 및 외국의 시방서 규정과 비교 검토하였다.

  • PDF

가무락 Cyclina sinensis의 인공수정 및 발생에 관한 연구 (STUDIES ON THE ARTIFICIAL FERTILIZATION AND DEVELOPMENT OF CYCLINA SINENSIS)

  • 최신석;송용규
    • 한국수산과학회지
    • /
    • 제6권1_2호
    • /
    • pp.76-80
    • /
    • 1973
  • 1970년 6월부터 1971년 9월까지 사이에 Cyclina sinensis의 $NH_{4}OH$ 해수용액 규정농도별 수정율, 초기 발생 과정 및 유생의 변태과정을 조사하였다. 1. C. sinensis의 $NH_{4}OH$ 해수용액에 의한 규정농도별 수정율은 1/1000N $NH_{4}OH$ 해수용액 속에서 가장 좋은 결과를 얻었고, 이렇게 처형된 수정란의 발생과정도 정상적임을 확인하였다. 2. C. sinensis의 초기 발생과정에서는 수정후 1시간 30분이 지나면 2구기, 4시간이 지나면 포배기, 6시간이 지나면 Trocophore기에 달함을 볼 수 있었다. 3. C.sinensis의 유생을 사육한 결과, 수정후 1일이 지나면 원패각의 평균 각장이 $110\mu$인 후기 D형기에, 7일이 지나면 평균 각장이 $235\mu$인 각정기에, 20일이 지나면 평균 각장이 $260\mu$인 변태기에 달함을 볼 수 있었다. 4. C. sinensis의 유생을 실험실내 수조 속에서 사육하여 각장 $270\mu$인 치패를 얻을 수 있었다.

  • PDF

강박스 사장교의 시공단계를 고려한 3D 상세 유한요소 해석 (3-Dimensional FE Analysis of Construction Stages of The Cable-stayed Bridge with Steel-box Girder)

  • 이태열;김영훈;신현양;김재권
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.249-256
    • /
    • 2005
  • Rigorous FE(Finite Element) analyses of the cable-stayed bridge with steel-box girder, the main construction method of which is FCM (Free Cantilever Method), are presented in this paper. The analysis and the checking of design for a derrick crane under several loading conditions are performed using the software MIDAS/Civil and the beam elements are used to model the main structure. Among all the construction stages, special construction stages are chosen and considered to ensure the safety of segments of box girder The stress analysis for lifting of a segment of box girder is performed using the software SAP2000 and the shell elements of which having 6 DOF(Degrees Of Freedom) per nodes are successfully used to model the segment of box girder for the purpose of capturing the detailed behaviors on the folded-plates in the segment. Finally, concluding remarks are given to improve a design of the derrick crane and the segment based on the results from this study.

  • PDF

Effects of Dietary Calcium Levels on Productive Performance, Eggshell Quality and Overall Calcium Status in Aged Laying Hens

  • An, S.H.;Kim, D.W.;An, B.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권10호
    • /
    • pp.1477-1482
    • /
    • 2016
  • This study was conducted to investigate the effects of diets with varying levels of calcium on egg production, shell quality and overall calcium status in aged laying hens. A total of five hundred 70-wk-old Hy-Line Brown layers were divided five groups and fed one of the five experimental diets with 3.5%, 3.8%, 4.1%, 4.4%, or 4.7% Ca, for 10 weeks. There were no significant differences in feed intake, egg production and egg weight among groups. The cracked eggs were linearly reduced as dietary Ca levels increased to 4.7% (p<0.01). A significant linear improvement for eggshell strength and thickness were determined with increasing dietary Ca levels (p<0.01). The contents of serum Ca and phosphorus were not affected by dietary Ca levels. With increase in dietary Ca levels, the tibial breaking strength slightly increased. There were no significant differences in the tibial contents of ash, Ca and phosphorus among groups. In conclusion, eggshell quality, as measured by appearance, strength and thickness of eggshell, were influenced by dietary Ca content as expected (p<0.05). These results suggested that aged laying hens require relatively higher level of Ca than required levels from current Korean feeding standards for poultry.

김에서 Porphyran의 효율적 추출 방법 및 Porphyran 잼 제조연구 (Study on Manufactute of Porphyran Jam and Eppiciency Extraction Method of Porphyran from Porphyra yezoensis)

  • 류성렬
    • 한국응용과학기술학회지
    • /
    • 제30권3호
    • /
    • pp.504-517
    • /
    • 2013
  • The purpose of this study was to process extraction and separation for polyglucose porpyran from pophyra yezoensis as high yield. The acidic porphyran solution was extracted with 0.1~1N of ${\alpha},{\beta}$-dichloromaleic acid or ${\alpha}$-chloromaleic acid of 2% solution as organic acid instead of inorganic acid at $60^{\circ}C$ and then porphyran was collection of high yield to acidic solution and it was neutralization treated with 0.1N of $d-Ca(OH)_2$ solution and the mixture was conversion to porphyran salt form and treated with a shell powder of ouster and then added of ethanol as precipitator. It recovery porphyran contained of violet purple laver coloring matter was obtained as a crystalline and used for the next step without future purification to prepare of porphyran laver jam. so, The resulting porphyran and porphyran jam was characterized by it component and physical properties.

Development of Full ice-cream cone model for HCME 3-D parameters

  • Na, Hyeonock;Moon, Yong-Jae;Lee, Harim
    • 천문학회보
    • /
    • 제41권1호
    • /
    • pp.47.1-47.1
    • /
    • 2016
  • The determination of three dimensional parameters (e.g., radial speed, angular width, source location) of Coronal Mass Ejections (CMEs) is very important for space weather forecast. To estimate these parameters, several cone models based on a flat cone or a shallow ice-cream cone with spherical front have been suggested. In this study, we investigate which cone model is proper for halo CME morphology using 26 CMEs which are identified as halo CMEs by one spacecraft (SOHO or STEREO-A or B) and as limb CMEs by the other ones. From geometrical parameters of these CMEs such as their front curvature, we find that near full ice-cream cone CMEs are dominant over shallow ice-cream cone CMEs. Thus we develop a new full ice-cream cone model by assuming that a full ice-cream cone consists of many flat cones with different heights and angular widths. This model is carried out by the following steps: (1) construct a cone for given height and angular width, (2) project the cone onto the sky plane, (3) select points comprising the outer boundary, (4) minimize the difference between the estimated projection speeds with the observed ones. We apply this model to 12 SOHO halo CMEs and compare the results with those from other stereoscopic methods (a geometrical triangulation method and a Graduated Cylindrical Shell model) based on multi-spacecraft data.

  • PDF

EXPANSION VELOCITY AND SPECTROSCOPIC CLASSIFICATION OF NOVA DELPHINI 2013

  • AZALIAH, RHISA;MALASAN, HAKIM L.;HAANS, GABRIELA K.;AKHYAR, SAEFUL
    • 천문학논총
    • /
    • 제30권2호
    • /
    • pp.251-254
    • /
    • 2015
  • Low resolution spectra of Nova Delphini 2013 (V339 Del) in the optical range have been obtained at Bosscha Observatory, Indonesia during its maximum light (V = 4.3). Spectra were observed from August 16 to 27, 2013. The GAO-ITB RTS 20.3 cm telescope, and SBIG DSS-7 spectrograph and SBIG ST-7 XE as the detector have been employed throughout the observations. The spectra show P-Cygni profiles in Balmer, NaI'D' and Fe II lines, from which we determined shell expansion velocities of $1421.66{\pm}39.18km/s$, $1227.54{\pm}21.57km/s$ and 1402.86 km/s, respectively. Our spectroscopic observations followed the spectral evolution of V339 Del from the pre-maximum phase to early Orion phase. The characteristics of the nova Delphini 2013 resembles those of Fe II-type novae.

Conformational Analysis of Catecholamines-Raman, High Resolution NMR, and Conformational Energy Calculation Study

  • Park Mi-Kyung;Yoo Hee-Soo;Kang Young Kee;Lee Nam-Soo;Ichiro Hanazaki
    • Bulletin of the Korean Chemical Society
    • /
    • 제13권3호
    • /
    • pp.230-235
    • /
    • 1992
  • The conformational analysis has been done for catecholamines (dopamine, norepinephrine, and epinephrine) in the cationic and di-anionic states. The species responsible for adsorption on silver metal surface is anionic deprotonated at hydroxyl groups of catechol moiety, i.e., di-anionic states of catecholamines. This was deduced from Fourier-transform Raman spectra of sodium salts of catecholamines. High resolution proton NMR (400 MHz) spectra of catecholamines in basic and neutral $D_2O$ solution show that the conformations of norepinephrine and epinephrine in the di-anionic states are preferred in gauche, but not for dopamine in the di-anionic state. However the energy difference between trans and gauche of catecholamines in the protonated cationic states is small enough to rotate freely through C-C bond in ethylamine moiety. The conformational calculations using an empirical potential function and the hydration shell model (a program CONBIO) show consistent with above experimental results. The calculations suggest that the species of catecholamines adsorbed on silver metal surface would be in favor of the gauche conformations.