• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.141-150
• /
• 2007

This paper presents a lumped model to predict crosstalk characteristics of thermally driven inkjet print heads. Using the lumped R-C model, heating characteristics of the head are predicted to be in agreement with IR temperature measurements. The inter-channel crosstalk is simulated using the lumped R-L network. The values of viscous flow resistance, R and flow inertance, L of connecting channels are adjusted to accord with the 3-D numerical simulation results of three adjacent jets. The crosstalk behaviors of a back shooter head as well as a top shooter head have been investigated. Predictions of the proposed lumped model on the meniscus oscillations are consistent with numerical simulation results. Comparison of the lumped model with experimental results identifies that abnormal two-drop ejection phenomena are related to the increased meniscus oscillations because of the more severe crosstalk effects at higher printing speeds. The degree of crosstalk has been quantified using cross-correlations between neighboring channels and a critical channel dimension for acceptable crosstalk has been proposed and validated with the numerical simulations. Our model can be used as a design tool for a better design of thermal inkjet print heads to minimize crosstalk effects.

• 한국CDE학회논문집
• /
• 제22권2호
• /
• pp.202-214
• /
• 2017

The augmented visualization of analysis results can play an import role as a post-processing tool for the modeling & simulation (M&S) technology. In particular, it is essential to develop such an M&S tool which can run on various multi-devices. This paper presents an augmented reality (AR) approach to visualizing and interacting with M&S post-processing results through mobile devices. The proposed approach imports M&S data, extracts analysis information, and converts the extracted information into the one used for AR-based visualization. Finally, the result can be displayed on the mobile device through an AR marker tracking and a shader-based realistic rendering. In particular, the proposed method can superimpose AR-based realistic scenes onto physical objects such as 3D printing-based physical prototypes in a seamless manner, which can provide more immersive visualization and natural interaction of M&S results than conventional VR or AR-based approaches. A user study has been performed to analyze the qualitative usability. Implementation results will also be given to show the advantage and effectiveness of the proposed approach.

• 한국의류산업학회지
• /
• 제21권1호
• /
• pp.104-111
• /
• 2019

This study was developed using the DTP (digital textile printing) jacquard fabrics with a three-dimensional pattern for bag and evaluated the preference and emotional structure. The following conclusions were obtained. Three-dimensional patterns of 12 species using the illustrator program, including six kinds of designs based on the text and six kinds of character types based on the geometry of the basic design was developed. As a result of evaluating the preference of the three-dimensional pattern jacquard fabric, the most preferred fabric was a three-dimensional patterned jacquard fabric with a motif of the Korean consonant "ㅅ". The results of analyzing the emotional dimension of the three-dimensional pattern jacquard fabric, eight factors including simple image, feminine image, exotic image, graphic image, sporty image, masculine image, dynamic image and stereoscopic image were derived. Between emotional factors and preferences correlation analysis showed the stronger the simple image, the feminine image, and the sporty image, the more preferable. It suggested the possibility of a morphological and new fabric for bag, textile design motifs by using Hangul consonants attempt to limit the flatness of the existing geometric form patterns that can be applied to three-dimensional bag whether swirly patterns overcome.

• 한국인터넷방송통신학회논문지
• /
• 제19권5호
• /
• pp.239-244
• /
• 2019

기존의 주조 방식은 긴 제작 시간과 많은 비용이 소모되며, 즉각적인 디자인 수정이 불가능하여 다변화하는 현대사회에 대응하기 어려웠다. 때문에 주조 산업은 새로운 대안이 필요했으며 그 중 하나가 적층 제조 기술과의 접목이다. 적층제조기술에는 7가지가 있으나 본 논문에서는 PBF를 활용한 중자 제작을 살펴보려고 한다. 현재의 적층 제조 기술 장비들은 대부분 외산 장비들로 기능 활용과 서비스의 제약이 따르고 있어서 장비의 국산화가 필요하였고 장비의 개발과 함께 기술 활용의 내용을 담았다. 각 장에서는 PBF의 장비 개발 단계 및 소재 적용과 변수 설정에 대해서 서술하고 있으며, 최종적으로 기술을 활용한 산업용 중자 개발의 성공과 특성에 대한 정보를 보여주고 있다.

• 한국인터넷방송통신학회논문지
• /
• 제19권5호
• /
• pp.245-250
• /
• 2019

현대 주조산업에서는 적층제조기술과 같은 신기술을 도입하면서 과거에는 불가능했던 일들의 실현가능성을 보여주고 있다. 이미 해외에서는 적층제조기술을 활용한 중자 생산 및 적용 사례가 심심치 않게 보도되고 있으며, 정부지원 하에 고유 기술들을 개발하고 시장을 확장해 나가고 있다. 반면 국내에서는 고유장비 기술은커녕 적층제조기술의 활용조차 전무한 실정이다. 이러한 상황에서 적층제조기술의 도입과 국산화는 반드시 필요하다. 본 논문의 각 장에서는 여러가지 적층제조기술 중 접착제 분사 기술에 관련된 적층제조장비의 개발 과정에서부터 개발 장비를 활용한 산업용 중자 생산의 내용을 다루고 있으며, 실제 주조 산업의 적용 가능성에 대해서 언급하고 있다.

• 반도체디스플레이기술학회지
• /
• 제20권1호
• /
• pp.99-103
• /
• 2021

Warpage defect detecting of scaffold is very important in biosensor production. Because warpaged scaffold cause problem in cell culture. Currently, there is no detection equipment to warpaged scaffold. In this paper, we produced detection model for shape warpage detection using deep learning based CNN. We confirmed the shape of the scaffold that is widely used in cell culture. We produced scaffold specimens, which are widely used in biosensor fabrications. Then, the scaffold specimens were photographed to collect image data necessary for model manufacturing. We produced the detecting model of scaffold warpage defect using Densenet among CNN models. We evaluated the accuracy of the defect detection model with mAP, which evaluates the detection accuracy of deep learning. As a result of model evaluating, it was confirmed that the defect detection accuracy of the scaffold was more than 95%.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.79-87
• /
• 2014

In this paper, we implemented the HearCAM platform with Raspberry PI B+ model which is an open source platform. Raspberry PI B+ model consists of dual step-down (buck) power supply with polarity protection circuit and hot-swap protection, Broadcom SoC BCM2835 running at 700MHz, 512MB RAM solered on top of the Broadcom chip, and PI camera serial connector. In this paper, we used the Google speech recognition engine for recognizing the voice characteristics, and implemented the pattern matching with OpenCV software, and extended the functionality of speech ability with SVOX TTS(Text-to-speech) as the matching result talking to the microphone of users. And therefore we implemented the functions of the HearCAM for identifying the voice and pattern characteristics of target image scanning with PI camera with gathering the temperature sensor data under IoT environment. we implemented the speech recognition, pattern matching, and temperature sensor data logging with Wi-Fi wireless communication. And then we directly designed and made the shape of HearCAM with 3D printing technology.

• 구강회복응용과학지
• /
• 제37권1호
• /
• pp.39-47
• /
• 2021

의치의 금속구조물을 selective laser melting을 통하여 제작하는 경우 기존의 제작 방식에 비해 여러 기공 과정이 생략되어 시간이 절약되고 간편해진다. 또한 균질한 밀도의 금속구조물을 얻을 수 있어 우수한 기계적 성질, 특히 피로 파절에 대한 높은 저항성을 기대할 수 있다. 본 증례에서는 부분 무치악 환자에서 기존의 방식으로 최종인상을 채득하여 주모형을 제작하였고 이를 스캔하여 데이터화 하였다. 스캔 데이터 상에서 금속구조물을 디자인한 뒤 selective laser melting 방식으로 가철성 국소의치를 제작하였으며 기능적 및 심미적으로 만족스러운 결과를 보였기에 이를 보고하는 바이다.

• 한국임상약학회지
• /
• 제30권4호
• /
• pp.217-225
• /
• 2020

The fourth industrial revolution, with its characteristics of "hyper-connectivity", "hyper-intelligence" and "automation", is a hot topic worldwide. It will fundamentally change industry, economy, and business models through technological innovations, such as big data, cloud computing, Internet of Things (IoT), artificial intelligence (AI), and 3D printing. In particular, the development of highly advanced information technology (IT) and AI is expected to replace human roles, thereby changing employment and occupation prospects in the future. Based on this, some predict that the profession of the pharmacist will soon disappear. To counter this, pharmacists' attention and efforts are required to seek innovative transformations in their functions by responding sensitively and promptly to changes of the fourth industrial revolution. It is also necessary to recognize the new roles of pharmacists and to develop the competencies to perform them. The fourth industrial revolution is an inevitable change of the times. At this time, we should take comprehensive and open perspectives on how the future society will change economically, culturally, and socially, and use it as an opportunity to shape the new future of pharmacists.

• 대한치과기공학회지
• /
• 제43권4호
• /
• pp.153-159
• /
• 2021

Purpose: The purpose of this study was to assess the fitness of anterior and posterior interim crowns fabricated by three different additive manufacturing technologies. Methods: The working model was digitized, and single crowns (maxillary right central incisor and maxillary right first molar) were designed using computer-aided design software (DentalCad 2.2; exocad). On each abutment, interim crowns (n=60) were fabricated using three types of additive manufacturing technologies. Then, the abutment appearance and internal scan data of the interim crown was obtained using an intraoral scanner. The fitness of the interim crowns were evaluated by using the superimposition of the three-dimensional scan data (Geomagic Control X; 3D Systems). The one-way analysis of variance and Tukey posterior test were used to compare the results among groups (α=0.05). Results: A significant difference was found in the fitness of the interim crowns according to the type of additive manufacturing technology (p<0.05). The posterior interim crown showed smaller root mean square value than the anterior interim crown. Conclusion: Since the fitness of the posterior interim crown produced by three types of additive manufacturing technology were all within clinically acceptable range (<120 ㎛), it can be sufficiently used for the fabrication of interim crowns.