• 터널과지하공간
• /
• 제33권3호
• /
• pp.126-140
• /
• 2023

본 연구에서는 석회석 광산에서 발생한 지반침하지에 대해 라이다 기반 정밀 형상 모델을 활용하여 침하 원인을 분석하였다. 드론 및 지상 기반 라이다 시스템을 활용하여 침하지 지표 및 갱도에 대한 정밀 형상 모델 구축을 수행하고 현장 지질조사 및 암반 분류 결과를 활용하였다, 정밀 형상 모델을 통해 침하지 주변부 크라운필러 두께 및 단층 분포, 침하지 및 침하 적치물 부피 계산, 침하 지표 경사 분석을 수행하였다. 이와 같은 분석을 통해 석회석 광산에서 발생한 지반침하 원인을 규명하였다.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.267-276
• /
• 2002

Research being undertaken at the University of Auckland has enabled Vortec Energy to improve the performance of the Vortec 7 Diffuser Augmented Wind Turbine. Computational Fluid Dynamic (CFD) modelling of the Vortec 7 was used to ascertain the effectiveness of geometric modifications to the Vortec 7. The CFD work was then developed to look at new geometries, and refinement of these led to greater power augmentation for a given diffuser exit area ratio. Both full scale analysis of the Vortec 7 and a wind tunnel investigation of the development design have been used for comparison with the CFD model.

• 한국화재소방학회논문지
• /
• 제14권2호
• /
• pp.21-32
• /
• 2000

본 연구는 터널에서의 화재성상을 파악하기 위해 실물 실험의 대안으로서 축소 모형 실험을 수행하였고 또한 실험결과와 비고분석하기 위하여 터널내에서의 화재에 대하여 연기거동을 수치해석하였다. 터널내에서의 연기유동은 Buoyancy force에 의해 지배되므로 Froude scaling링에 의해 얻어진 축소법칙에 따라 실물터널을 1/20로 축소한 모형에서 실험 수행하였고 검증하였다. 여기서 얻어진 결과를 수치해석 결과와 비교하였다. 수치해석은 3D 비정 렬 격자, PISO 알고리즘, 부력 Plume 모델등을 사용하였다. 분석결과 실험과 수치해석 결과가 어느정도 일침함을 확인하였고, 연층의 전달 속도, 온도 구배, 하강 높이를 확인할 수 있었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1726-1731
• /
• 2006

본 연구에서는 임하다목적댐의 비상여수로 설계를 위하여 수리모형실험과 수치모형실험을 수행하였다. 수치모의에는 3차원 수치모형인 FLOW-3D를 사용하였다. 비상여수로 설계를 위하여 접근수로부, 월류웨어부, 천이부 및 도류부, 그리고 감세부로 나누어 수리모형실험과 수치모형실험의 수리현상 결과를 비교하였다. 최적의 비상여수로 설계를 위하여 기본계획안에 대하여 모의하고 이에 대한 보완점과 문제점들을 찾아내고 해결책을 제시하였다. 수치모의를 통하여 수리모형실험에서 쉽게 수행하기 어려운 다양한 조건을 모의하고 최적의 결과에 찾아 이를 수리모형실험으로 검증함으로써 비상여수로 기본설계안을 도출하였다.

• 지질공학
• /
• 제17권2호
• /
• pp.217-224
• /
• 2007

터널이 굴착되면 응력이 재분배되는 과정동안 변위가 발생한다. 터널의 변위는 굴착 전 선행변위, 굴착 후 미측정 변위, 계측변위로 구분할 수 있다. 일반적으로 굴착 전 선행변위와 굴착 후 미측정 변위의 현장 측정은 어렵기 때문에 터널 굴착에 따른 전변위의 크기와 변화 양상을 산정하기 위한 연구가 많이 수행되어왔다. 본 연구에서는 퇴적암을 기반으로 하는 터널의 지반등급별 전변위를 산정하고 이들의 특성을 파악하기 위하여 역해석 기법을 사용하였다. 계측변위와 3차원 수치해석에 의해 계산된 변위의 오차를 최소한으로 줄여 지반등급별 물성치를 추정하였으며, 굴착에 따른 전변위 분포 양상을 산정하였다. 최종적으로 logistic 모형을 따르는 지반등급별 굴착에 따른 변위의 비선형 회귀식을 산정하였다.

• Wind and Structures
• /
• 제11권4호
• /
• pp.323-340
• /
• 2008

In this paper, the along-wind, across-wind as well as torsional dynamic wind loads on three kinds of lattice tower models are investigated using the base balance technique in a boundary layer wind tunnel. The models were specially designed, and their fundamental frequencies in the directions of the three principal axes are still in the frequency range of the spectra of wind loads on lattice towers. In order to clear contaminations to the spectra of wind loads induced by model resonance, the generalized force spectra of the first mode of the models in along-wind, across-wind and torsional directions were derived based on measured base moments of the models. The RMS generalized force coefficients are also obtained by removing the contributions of model resonance. Finally, the characteristics of the 3-D dynamic wind loads, especially those of the across-wind dynamic loads, on the three kinds of lattice towers are presented and discussed.

• Wind and Structures
• /
• 제18권3호
• /
• pp.295-320
• /
• 2014

The characteristics of amplitudes and power spectra of X axial, Y axial, and RZ axial (i.e., body axis) wind forces on a 492 m high-rise building with a section varying along height in typical wind directions are studied via a rigid model wind tunnel test of pressure measurement. Then the corresponding mathematical expressions of power spectra of X axial (across-wind), Y axial (along-wind) and torsional wind forces in $315^{\circ}$ wind directions are proposed. The investigation shows that the mathematical expressions of wind force spectra of the main structure in across-wind and torsional directions can be constructed by the superimposition of an modified wind spectrum function and a peak function caused by turbulent flow and vortex shedding, respectively. While that in along-wind direction can only be constructed by the former and is similar to wind spectrum. Moreover, the fitted parameters of the wind load spectra of each measurement level of altitude are summarized, and the unified parametric results are obtained. The comparisons of the first three order generalized force spectra show that the proposed mathematical expressions accord with the experimental results well.

• 한국산업융합학회 논문집
• /
• 제27권4_2호
• /
• pp.833-840
• /
• 2024

According to recent data from the Korea Meteorological Administration(KMA), the frequency of typhoons around the Korea Peninsula is almost unchanged, but the intensity is on the rise due to climate change. A typhoon that has become so powerful can cause partial or complete damage to the traffic signal structures, limiting the operation of the vehicle and causing traffic congestion. If the traffic signal structure fails to function properly due to the influence of the typhoon, not only the v ehicle operation will be disrupted, but also direct damage to the traffic signal structure will occur. In addition, if the social overhead cost of traffic congestion is included, the recovery cost caused by the typhoon will increase to an extent that it is difficult to estimate. Therefore, in this study, a wind tunnel experiment was performed by producing a wind tunnel model of an existing fixed traffic signal structure and a traffic signal structure in which signs and traffic lights are hinged. Also, The fixed and hinge structures were modeled as 3D finite elements, and wind-resistant analysis was performed by wind speed, and, wind-resistant safety of traffic signal structures were analyzed and examined through wind-resistant analyses. From the comparative analysis of the results of experiment and FE analysis, it was known that the stress reduction rate of the hinge connection structure was at least 30% compared to that of the fixed connection structure from the results of the wind tunnel experiment and FE analysis. And As a result of finite element analysis for the maximum design wind speed of 50m/s, it was found that the maximum stress generated in the existing structure exceeded all the yield stress, but the maximum stress of the hinge connection structure was within the yield stress. Finally The hinge connection structure showed a relatively large stress reduction rate as the wind speed increased and the length of the lateral beam was shorter at the same wind speed.

• Advances in aircraft and spacecraft science
• /
• 제4권2호
• /
• pp.145-167
• /
• 2017

The presented paper gives an overview of several projects addressing the experimental characterization and control of the buffet phenomenon on 3D turbulent wings in transonic flow conditions. This aerodynamic instability induces strong wall pressure fluctuations and therefore limits flight domain. Consequently, to enlarge the latter but also to provide more flexibility during the design phase, it is interesting to try to delay the buffet onset. This paper summarizes the main investigations leading to the achievement of open and closed-loop buffet control and its experimental demonstration. Several wind tunnel tests campaigns, performed on a 3D half wing/fuselage body, enabled to characterize the buffet aerodynamic instability and to study the efficiency of innovative fluidic control devices designed and manufactured by ONERA. The analysis of the open-loop databases demonstrated the effects on the usual buffet characteristics, especially on the shock location and the separation areas on the wing suction side. Using these results, a closed-loop control methodology based on a quasi-steady approach was defined and several architectures were tested for various parameters such as the input signal, the objective function, the tuning of the feedback gain. All closed-loop methods were implemented on a dSPACE device able to estimate in real time the fluidic actuators command calculated mainly from the unsteady pressure sensors data. The efficiency of delaying the buffet onset or limiting its effects was demonstrated using the quasi-steady closed-loop approach and tested in both research and industrial wind tunnel environments.

• Wind and Structures
• /
• 제21권4호
• /
• pp.425-442
• /
• 2015

This paper discusses the processing of the wind loads measured in wind tunnel tests by means of multi-channel pressure scanners, in order to compute the response of 3D structures to atmospheric turbulence in the time domain. Data compression and the resulting computational savings are still a challenge in industrial contexts due to the multiple trial configurations during the construction stages. The advantage and robustness of the bi-orthogonal decomposition (BOD) is demonstrated through an example, a sail glass of the Fondation Louis Vuitton, independently from any tentative physical interpretation of the spatio-temporal decomposition terms. We show however that the energy criterion for the BOD has to be more rigorous than commonly admitted. We find a level of 99.95 % to be necessary in order to recover the extreme values of the loads. Moreover, frequency limitations of wind tunnel experiments are sometimes encountered in passing from the scaled model to the full scale structure. These can be alleviated using a spectral extension of the temporal function terms of the BOD.