• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.447-448
• /
• 2009

In this paper, we propose a system which is a 2D/3D switchable module. The display mode can be s witched by user or content.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.634-641
• /
• 2000

A switchable VCO for DECT handset is designed and fabricated. In dual mode radios, a single VCO is desired to operate at two different frequencies to meet the requirement of two mode(Tx, Rx). The three design types of switchable VCO are switched resonator VCO, switched mode VCO and dual band VCO. In this paper, we use the switched resonator VCO type using pin diode switch to change the total amount of capacitance in the tank circuit. At the bias condition of 3 V and 13mA, the output power and phase noise are better than6.5dBm and -104dBc/Hz at 25khz offset from the carrier, respectively , across the operating frequency range. From these results, the fabricated switched VCO is applicable to the DECT handset.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.31-35
• /
• 2005

A prerequisite for a wide market acceptance of 3D displays is the ability to switch between 3D and full resolution 2D. In this paper we present a robust and cost effective concept for an auto-stereoscopic switchable 2D/3D display. The display is based on an LCD panel, equipped with switchable LC-filled lenticular lenses. A demonstrator of this concept is made. We will discuss measurements and numerical simulations of the key optical characteristics of this display. The switching characteristics of LC-filled lenticular lenses are discussed and the overlap of the view distributions is introduced as a figure of merit for crosstalk. The 0.62 overlap in our present demonstrator design, gives an excellent 3D image quality, combined with a good depth impression.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1311-1313
• /
• 2006

Stereoscopic/autostereoscopic systems have been developed in order to express true 3D images, but have never had great success in the practical use. In order to apply 3D display to promising applications such as advertisements and games, we've developed a 42" 2D/3D switchable display. It has characteristics that don't require special glasses for 3D images, use multi-view technology for improving 3D viewing characteristics, and has a 2D/3D switching function to express dynamic 3D contents as well as conventional 2D contents.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.60-66
• /
• 2006

In this paper, a circular microstrip patch antenna for switchable polarization is presented. For the switchable polarization, pairs of tuning stubs and two PIN diodes are utilized. By independently setting the PIN diodes on or off, the antenna produces either linear polarization or circular polarization. From the results, the -10 dB impedance bandwidths of 57.0 MHz($2.4\%$) and 50.0 MHz($2.1\%$) when operated in the linear polarization, and the 3 dB axial ratio bandwidth of $1.3\%$ with minimum of 0.2 and 0.9 dB in the circular polarization have been observed.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.318-320
• /
• 2009

A switchable Yagi-Uda antenna prototype with radiation pattern reconfiguration is presented in this letter. The proposed reconfigurable antenna is based on the concept of switching between the reflector and director of a Yagi-Uda antenna using a radio frequency PIN diode. As a result, the minimum/maximum radiation can be steered towards desired signals or away from interfering signals in opposite directions. The measured 10 dB impedance bandwidth and gain are 210 MHz (7%) and 8.02 dBi at 3 GHz, respectively. Details of the antenna design and its performance are described and empirically analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5447-5451
• /
• 2012

This paper presents a pattern-switchable microstrip patch antenna with loop structure. The loop structure for switchable radiation beam pattern is connected with feeding line of the microstrip patch antenna. As changing switch on/off state, the radiation beam pattern can be changed. The target frequency is 2.4 GHz and maximum radiation gain is 3.2dBi. The proposed antenna is useful for diversity antenna and smart antenna in modern wireless communication including MIMO (Multi-Input Multi-Output) and WLAN system. The sizes of the rectangular patch and the ground plane are $28mm{\times}28mm$ and $40mm{\times}50mm$, respectively. The simulation and experimental results show that the antenna radiation pattern can be changed with switch on/off configuration.

• Journal of Information Display
• /
• v.8 no.1
• /
• pp.22-25
• /
• 2007

Stereoscopic/autostereoscopic systems have been developed to express 3D images, but have not been successfully use in practise. In order to apply 3D display to promising applications such as advertisements and games, we developed a 42" 2D/3D switchable display. It has characteristics that do not require special glasses for 3D images, uses multi-view technology for improving 3D viewing characteristics, and has a 2D/3D switching function to express dynamic 3D contents as well as conventional 2D contents.

• Journal of the Optical Society of Korea
• /
• v.19 no.3
• /
• pp.265-271
• /
• 2015

We propose a reactive mesogen (RM) lens array to obtain good focusing behavior along with a short focal plane, where the focusing behavior is switchable according to the polarization state of incident light. Polarization-dependent focusing behavior is obtained using a planoconvex RM microlens array on a planoconcave isotropic lens template. Even though the sagitta of our RM lens is high, to obtain the short focal length, the RM layer can be aligned well by introducing a top-down alignment effect, using a nanogrooved template. The optical noise due to the $moir{\acute{e}}$ effect generated by the nanogrooves on the surface of the planoconvex RM layer can be removed simply by overcoating a thin RM layer, which is self-aligned by the geometric surface effect, without an additional alignment process. We demonstrate a hexagonal-packed RM lens array that has a very high fill factor and symmetric phase profile, for an ideal lens.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.85-91
• /
• 2010

In this paper, a new microstrip antenna using asymmetric U-shaped slotted ground is proposed for a switchable circular polarization sense. The proposed antenna is achieved a circularly polarization from orthogonal E-field distributions with 90 degree phase difference due to the asymmetrical U-shaped slot. Moreover, the circular polarization sense of the proposed antenna can be easily switchable with changing the symmetric plane of the U-shaped slots. As a result, the proposed antenna is implemented by two PIN diodes with two different bias condition for ON/OFF states. The measured axial ratios are about 1.5 dB without the dependence of the polarization sense and 3-dB axial ratio bandwidth are achieved 29 MHz with respect to about 1.2 % at 2.46 GHz operating frequency.