• 한국의류산업학회지
• /
• 제8권2호
• /
• pp.209-213
• /
• 2006

The 3-D information is useful as basic data which has been utilized in the development of simulating technology as fit-simulation. The experiment is designed to take some useful data on the variant shapes which contribute in simulating the adaptability of the clothes. The general figure of the clothes are made after the figure of the basic standing posture of the human body. The shape of the clothes fits with kinetic characteristic of the human body as the form of the clothes gets twisted, the ease of the clothes changes, and the clothes itself expands. We studied the dressed shapes of blouse according to two types of the arm movement(basic posture and reach forward) and three types of clothes(foundation, blouse with short sleeves and sleeveless) in the sit-down-posture. We accomplished some experimental data on three-dimensional measurement of the dressing shapes using TDS-3100 3-D scanner made in Japan PULSTECH. It is considered that the variant of shapes and distribution of gaps in the dressed shapes of blouse are determined by the adaptability of clothes made in arm movement.

• 복식문화연구
• /
• 제23권5호
• /
• pp.894-905
• /
• 2015

The present study analyzed data from the 3D measurement of the feet of men aged over 20 years residing in the capital region as part of the 6th Anthropometry of Size Korea. To analyze the characteristics of the foot shapes of young men aged 20~39 years and middle-aged/elderly men aged 40~69 years by age and by type, a cluster analysis was conducted using the factors derived through the factor analysis as independent variables. The results of the study that analyzed the characteristics of foot shapes by type according to differences in age were as follows. First, through the analysis of the characteristics of the foot shapes of young men by type, five factors were extracted, and the foot shapes were classified into three types: Type 1 (short and flat), Type 2 (thick), and Type 3 (long and wide). Second, through the analysis of the characteristics of the foot shapes of middle-aged/elderly men by type, six factors were extracted, and the foot shapes were classified into four types: Type 1 (short and regular), Type 2 (flat), Type 3 (thick), and Type 4 (long and regular). The results of the present study are expected to serve as basic data for the design of shoes by age and foot type.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.479-486
• /
• 2016

In this paper, the algorithm which can convert a 2D image into a 3D Model will be discussed. The 2D picture drawn by a user is scanned for image processing. The Canny algorithm is employed to find the contour. The waterfront algorithm is proposed to find foreground image area. The foreground area is segmented to decompose the complex shapes into simple shapes. Then, simple segmented foreground image is converted into 3D model to become a complex 3D model. The 3D conversion formular used in this paper is also discussed. The generated 3D model data will be useful for 3D animation and other 3D contents creation.

• 패션비즈니스
• /
• 제16권4호
• /
• pp.137-151
• /
• 2012

This study aims to use the avatar sizing system of the 3D apparel CAD program instead of the existing 3D body scanners, and to commercialize 3D personal avatars. Towards these ends, the study examined a difference between a 3D avatar and actual body was determined to verify the 3D avatar sizing system. For the experiment, three subjects were selected, were measured as they were, and were made to undergo 3D body scanning and photographing. Then, using avatar sizing system on the 3D apparel CAD program, three types of virtual bodies, namely 3D avatars. The 3D avatar and actual body measurements were compared, and 3D avatars and 3D body-scanned shapes were likewise compared. As a result, the three types of actual bodies and their 3D avatars that were created based on the sizing system of the 3D apparel CAD program were overall similar. but, the thin body-YY type and the normal body-A type were different from their avatars. In the case of type B, who had a bulging abdomen, the 3D avatar was bigger than the actual body as measured. Also, in all body shapes, the girths around the chest, waist and abdomen were produced with exaggerated muscular amounts compared to their actual muscular amounts.

• 복식문화연구
• /
• 제17권6호
• /
• pp.1099-1111
• /
• 2009

The purpose of this study is to classify body shapes of aged women by using 3D body scan data. For the body shape analysis and classification, 3D body scan data of 270 aged women were used, and 16 main measurements consisting of a human body were used to conduct factor analysis, cluster analysis and discriminant analysis. The analysis were performed on all 'the method using the absolute value', 'the method using index of height and weight', and 'the method using index of height', and according to the classification results, the method which categorizes body shapes best in terms of their shapes was adopted. As the factor analysis result using the numerical value of height to categorize the body shapes of the aged women, factor 1 was the thickness and width for the height, factor 2 was the height of the upper part of the body for the height, factor 3 was the height of hips for the height, and factor 4 was the height of belly for the height. When the body shapes were categorized with the deducted factors as variables, they were divided into two types. Type 1 was a short and fat body shape($\blacksquare$ type) and 55.6% of the subjects were of this type. Type 2 was for the body shape whose vertical height, including weight, was long but all kinds of width and thickness were small, that is, tall and thin body shape($\blacksquare$ type), and 44.4% of the aged women were in this case.

• 한국BIM학회 논문집
• /
• 제5권2호
• /
• pp.12-18
• /
• 2015

Bridge piers typically have circular or rectangular shapes without decorative design. Prefabrication for accelerated construction has been widely adopted in bridge structures. Cost for steel formwork is a main restriction of creative irregular shapes. 3D modelling techniques allow creative design of columns and 3D printing provides possibility to minimize the fabrication cost. In this paper, 3D design process of bridge piers was suggested by converting 2D picture into 3D decorative shape. Formwork design using 3D printed panels was also proposed and mock-up tests were conducted. Precast columns need accurate geometry control from fabrication to assembly. Laser scanning and geometry control devices were adopted. Through the digitalized process of design, fabrication and assembly, creative design of structures can be realized in reasonable cost range.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2018년도 추계학술발표대회
• /
• pp.822-824
• /
• 2018

Estimation of 3-D objects from 2-D images is inherently performed by either motion or scene features methods as it has been described in different literatures. Structure from motion as a method employed in this study uses calibrated camera and reconstructed 3-D points from the structure of the scene for reliable and precise estimates. In this study we construct 3-D shapes using color pixels and reconstructed 3-D points to determine observable differences for the constructed 3-D images. The estimation using reconstructed 3-D points indicates that the sphere is recovered by the use of scale factor due to its known size while the one obtained by using color pixels has look similar to the former but different in the scales of the axes.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2555-2562
• /
• 1993

In this paper, the axial crush of the rectangular STS304 tube is analyzed using DYNA3D, and 10 models are tested under quasi-static load. The deformed shapes of analysis and test are present, and the analysis results are compared with the results of quasi-static test. This paper describes that free rotational boundary condition causes a very similar deformed shapes to expermental results, and using the elastic buclking modes as initial imperfecion shapes, the deformed shapes are very close to the experimental shapes.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제16권1호
• /
• pp.31-50
• /
• 2012

The present study explored whether the implementation of focused activities (intervention programme) can enhance 22 pre-service mathematics teachers' proficiency in solid geometry thinking level as well as change for the better their feelings in this discipline. Over a period of 6 weeks the pre-service teachers participated in activities and diversified experiences with 3D shapes, using illustration aids and actual experience of building 3D shapes in relation to the various spatial thinking levels. The research objectives were to investigate whether the intervention programme, comprising task-oriented activities of solid geometry, enhance mathematics pre-service teachers' mastery of their geometric thinking levels as well as examine their feelings towards this discipline before and after the intervention programme. The findings illustrate that learners' levels of geometric thinking can be promoted, entailing control on higher thinking levels as well as a more positive attitude towards this field.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.929-932
• /
• 1998

In this paper we propose a method of representing emotional experessions and lip shapes for sign language communication using 3-dimensional model. At first we employ the action units (AU) of facial action coding system(FACS) to display all shapes. Then we define 11 basic lip shapes and sounding times of each components in a syllable in order to synthesize the lip shapes more precisely for korean characters. Experimental results show that the proposed method could be used efficiently for the sign language image communication between different languages.