• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.219-232
• /
• 2013

본 논문에서는 손과 같은 물체가 안테나에 접근하였을 때 이탈된 공진 주파수와 임피던스를 자동으로 복원하여 무선기기의 송수신 성능을 항상 최적의 상태로 유지하도록 할 수 있는 UHF 특정 소출력 무선주파수 대역(425 MHz)의 소형 마이크로스트립 안테나를 설계, 제작하였다. 반파장 마이크로스트립 방사체의 양쪽 끝단을 접지면 쪽으로 폴딩하여 소형화하고, 역시 방사체와 접지면 사이에 바랙터 다이오드에 의한 캐패시턴스를 장하한 다음, 각각 역바이어스 전압 조절에 의한 용량을 비대칭적으로 변화시킴으로써, -30 dB 이하의 일률적인 반사 손실을 유지하면서 395 MHz에서 455 MHz까지 연속적인 공진 주파수 조절이 가능한 전압 제어 안테나를 설계하였다. RF 모듈로부터 시험 신호를 안테나에 송출하여, 부정합에 의해 안테나로부터 되돌아 온 반사 신호 레벨을 RSS(Receive Signal Strength) 검출 회로와 오프셋 증폭기를 통하여 마이크로콘트롤러에 입력하고, 그 레벨이 최소가 되도록 안테나의 바이어스 전압을 자동 조절하는 펌웨어를 설계, 시스템을 완성하여 시험한 결과, 손, 금속판, 유전체 등의 물체를 접근시켰을 때 틀어졌던 안테나의 특성이 수 초 이내에 완전하게 복원됨을 확인하였다.

• 한국광물학회지
• /
• 제5권1호
• /
• pp.14-21
• /
• 1992

경남 하동군 일대에 분포하고 있는 화강암질 암체내에서는 대규모의 Ti광체가 부존되어 있으며, 특히 옥종면 정수리 일대에서는 회유금속원소(REE)를 함유하는 갈렴석 결정들이 다수 발견되었다. 본 연구에서는 갈렴석에 대해 광학적연구, 전자현미분석, 원자흡수분광분석, X선회절분석, 적외선흡수분광분석, 비중 및 미경도 측정을 실시하였다. 갈렴석은 최대 크기 $3{\times}6cm$ 정도의 괴상형태로 산출되며 석영, 녹염석, 저어콘, 흑운모, 백운모 등과 공존한다. 갈렴석의 연마면 관찰로는 누대구조가 관찰되는데 이것은 자철석이 산점상으로 분포하기 때문이다. Th으로부터 방출되는 ${\alpha}$-입자의 존재가 방사능사진법에 의해 확인이 되었음에도 불구하고 메타믹트상태의 정도가 뚜렷하지 않다. 이 갈렴석내에는 ${\Sigma}$REE가 19.88-23.99%정도로 높은 편이며 CaO함량이 8.35-10.29wt%로 적은 편이다. 갈렴석의 성인에 대해서는 아직 확실하게 규명되지 않았으나 $TiO_2$의 함량(0.89-1.13wt%)이 높은 것과 저어콘과 같은 광물과 공존하고 있는 것으로 보아 마그마와 관련된 REE와 Ti성분이 풍부한 용액으로부터 정출된 것으로 추축된다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.