• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.536-541
• /
• 2000

A low cost PC based simulator for excavator manipulation has been developed using virtual reality technology. The simulator consists of two joystick input devices, server and client PCs, an excavator kinematics module, and a graphic rendering program Open Inventor. In order to use two joysticks in the PC window environment multi-thread programing with network protocol TCP/IP has been used. To provide realistic view to the operator, CAD program Pro/Engineer and 3D modeller have been employed to create 3D part geometry of tile manipulator and virtual environmental geometries. Those geometries also have been transformed and imported to the Open Inventor. The Simulator developed is to be improved for more realistic excavator operational training.

• Coupled systems mechanics
• /
• v.9 no.3
• /
• pp.237-264
• /
• 2020

This article investigates the static behaviour of functionally graded (FG) plates sometimes declared as advanced composite plates by using a simple and accurate quasi-3D and 2D hyperbolic higher-order shear deformation theories. The properties of functionally graded materials (FGMs) are assumed to vary continuously through the thickness direction according to exponential law distribution (E-FGM). The kinematics of the present theories is modeled with an undetermined integral component and satisfies the free transverse shear stress conditions on the top and bottom surfaces of the plate; therefore, it does not require the shear correction factor. The fundamental governing differential equations and boundary conditions of exponentially graded plates are derived by employing the static version of principle of virtual work. Analytical solutions for bending of EG plates subjected to sinusoidal distributed load are obtained for simply supported boundary conditions using Navier'is solution procedure developed in the double Fourier trigonometric series. The results for the displacements and stresses of geometrically different EG plates are presented and compared with 3D exact solution and with other quasi-3D and 2D higher-order shear deformation theories to verify the accuracy of the present theory.

• Structural Engineering and Mechanics
• /
• v.18 no.2
• /
• pp.211-229
• /
• 2004

The main purpose of this paper is the numerical analysis of the non-linear seismic response of a RC building mock-up. The mock-up is subjected to different synthetic horizontal seismic excitations. The numerical approach is based on a 3D-model involving multilayered shell elements. These elements are composed of several single-layer membranes with various eccentricities. Bending effects are included through these eccentricities. Basic equations are first written for a single membrane element with its own eccentricity and then generalised to the multilayered shell element by superposition. The multilayered shell is considered as a classical shell element : all information about non-linear constitutive relations are investigated at the local scale of each layer, whereas balance and kinematics are checked afterwards at global scale. The non-linear dynamic response of the building is computed with Newmark algorithm. The numerical dynamic results (blind simulations) are considered in the linear and non linear cases and compared with experimental results from shaking table tests. Multilayered shell elements are found to be a promising tool for predictive computations of RC structures behaviour under 3D seismic loadings. This study was part of the CAMUS International Benchmark.

• Journal of The Korean Astronomical Society
• /
• v.49 no.5
• /
• pp.193-198
• /
• 2016

Early-type galaxies (ETGs) are supposed to follow the virial relation $M=k_e{\sigma}^2R_e/G$, with M being the mass, σ_* being the stellar velocity dispersion, R_e being the effective radius, G being Newton's constant, and k_e being the virial factor, a geometry factor of order unity. Applying this relation to (a) the ATLAS^3D sample of Cappellari et al. (2013) and (b) the sample of Saglia et al. (2016) gives ensemble-averaged factors 〈k_e〉 = 5.15 ± 0.09 and 〈k_e〉 = 4.01 ± 0.18, respectively, with the difference arising from different definitions of effective velocity dispersions. The two datasets reveal a statistically significant tilt of the empirical relation relative to the theoretical virial relation such that $M{\propto}({\sigma}^2_*R_e)^{0.92}$. This tilt disappears when replacing R_e with the semi-major axis of the projected half-light ellipse, a. All best-fit scaling relations show zero intrinsic scatter, implying that the mass plane of ETGs is fully determined by the virial relation. Whenever a comparison is possible, my results are consistent with, and confirm, the results by Cappellari et al. (2013). The difference between the relations using either a or R_e arises from a known lack of highly elliptical high-mass galaxies; this leads to a scaling (1 - ϵ ) ∝ M^0.12, with ϵ being the ellipticity and $R_e=a\sqrt[]{1-{\epsilon}}$. Accordingly, a, not R_e, is the correct proxy for the scale radius of ETGs. By geometry, this implies that early-type galaxies are axisymmetric and oblate in general, in agreement with published results from modeling based on kinematics and light distributions.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.158-164
• /
• 2000

In recent year, desire and request fer micro automation are growing rapidly covering the whole range of the industry. This has been caused mainly by request of more accurate manufacturing process due to a higher density of integrated circuits in semiconductor industry. This paper presents a six d.o.f fine motion stage using magnetic levitation technique, which is one of actuating techniques that have the potential for achieving such a micro motion. There is no limit in motion resolution theoretically that the magnetically levitated part over a fixed stator can realize. In addition, it Is possible to manipulate the position and the force of the moving part at the same time. Then, the magnetic levitation technique is chosen into the actuating method. However, we discuss issues of design, kinematics, dynamics, and control of the proposed system. And a few experimental results fur step input are given.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.32.1-32.1
• /
• 2016

Early-type galaxies (ETGs) are supposed to follow the virial relation M ~ sigma^2 * R_e, with M being the galaxy mass, sigma being the stellar velocity dispersion, and R_e being the (2D) effective radius. I apply this relation to (a) the ATLAS3D sample and (b) the sample of Saglia et al. (2016). The two datasets reveal a statistically significant tilt of the empirical relation relative to the theoretical virial relation such that M ~ (sigma^2 * R_e)^0.92 with zero intrinsic scatter. This tilt disappears when replacing R_e with the semi-major axis of the projected half-light ellipse, a. Accordingly, a, not R_e, is the correct proxy for the scale radius of ETGs. By geometry, this implies that early-type galaxies are axisymmetric and oblate in general, in agreement with recent results from modeling based on kinematics and light distributions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.57-65
• /
• 1994

A collision-free path planning algorithm between an articulated robot and polyhedral obstacles using configuration space is presented. In configuration space, a robot is treated as a point and obstacles are treated as grown forbidden regions. Hence path planning problem is transformed into moving a point from start position to goal position without entering forbidden regions. For mapping to 3D joint space, slice projection method is used for first revolute joint and inverse kinematics is used for second and third revolute joint considering kinematic characteristics of industrial robot. Also, three projected 2D joint spaces are used in search of collision-free path. A proper example is provided to illustrate the proposed algorithm.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.155-159
• /
• 2005

High speed presses with high resolution in semiconductor lead frame manufacturing process are needed . But high speed operation accompanies mechanical vibration. therefore optimized kinematic structure to minimize vibration is required for a high speed press. And the growing competition in the industry asks a press with low cost, high speed, high resolution, and high pressing force, For this purpose a high speed press was modeled with 3D CAD solid modeling system and dynamic analysis were performed with CAE S/W for multibody dynamic analysis, Through these analyses a motor appropriate to a high speed press was selected and link structure for feeding system of the press was modified to reduce vibration. To perform this analysis working Model which is 2D kinematics and dynamic analysis software was used.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.130-138
• /
• 2012

There are increasing demands from the industry for intelligent robot-calibration solutions, which can be tightly integrated to the manufacturing process. A proposed solution can simplify conventional robot-calibration and teaching methods without tedious procedures and lengthy training time. iGPS(Indoor GPS) system is a laser based real-time dynamic tracking/measurement system. The key element is acquiring and reporting three-dimensional(3D) information, which can be accomplished as an integrated system or as manual contact based measurements by a user. A 3D probe is introduced as the user holds the probe in his hand and moves the probe tip over the object. The X, Y, and Z coordinates of the probe tip are measured in real-time with high accuracy. In this paper, a new approach of robot-calibration and teaching system is introduced by implementing a 3D measurement system for measuring and tracking an object with motions in up to six degrees of freedom. The general concept and kinematics of the metrology system as well as the derivations of an error budget for the general device are described. Several experimental results of geometry and its related error identification for an easy compensation / teaching method on an industrial robot will also be included.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.249-256
• /
• 2015

Objective : The purposes of this study was to perform a kinematical analysis on age and walkway types in elderly women subjects. Method : Forty subjects participated in the experiment (A1 group - age: $67.30{\pm}1.49yrs$, height: $153.81{\pm}4.47cm$, weight: $61.80{\pm}5.24kg$, A2 group - age: $71.70{\pm}1.10yrs$, height: $152.01{\pm}2.84cm$, weight: $59.69{\pm}7.34kg$, A3 group - age: $76.80{\pm}0.98yrs$, height: $150.16{\pm}6.08cm$, weight: $57.27{\pm}6.42kg$, A4 group - age: $81.80{\pm}0.60yrs$, height: $152.18{\pm}4.77cm$, weight: $55.80{\pm}7.78kg$). The study method adopted was the 3D analysis with six cameras. Ground type were classifed as gait pattern on flat, ascent and descent ramp. For the statistical analysis, the SPSS 21.0 was used to perform Repeated measured Two-way ANOVA. Results : In velocity of CM, there was faster movement on flat ground. When it came to the velocity of right toe, there was no significance in early mid-swing of right foot, but A4 was the slowest in late mid-swing of right foot on flat ground. In joint angle in left foot strike, the left hip joint and knee joint were more flexed in descent ramp, In addition left and right ankle joints were more plantarflexed in descent ramp, and left ankle joint was more plantarflexed in the over 75 yrs age groups. Conclusion : The higher age group were more flexed in lower body joints during descent ramp.