• Journal of information and communication convergence engineering
• /
• v.21 no.4
• /
• pp.337-345
• /
• 2023

In this study, we formulated a method that evaluates Taekwondo Poomsae performance using a series of choreographed training movements. Despite recent achievements in 3D human pose estimation (HPE) performance, the analysis of human actions remains challenging. In particular, Taekwondo Poomsae action analysis is challenging owing to the absence of time synchronization data and necessity to compare postures, rather than directly relying on joint locations owing to differences in human shapes. To address these challenges, we first decomposed human joint representation into joint rotation (posture) and limb length (body shape), then synchronized a comparison between test and reference pose sequences using DTW (dynamic time warping), and finally compared pose angles for each joint. Experimental results demonstrate that our method successfully synchronizes test action sequences with the reference sequence and reflects a considerable gap in performance between practitioners and professionals. Thus, our method can detect incorrect poses and help practitioners improve accuracy, balance, and speed of movement.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.4
• /
• pp.224-230
• /
• 2015

This manuscript presents a real-time solution for 3D human body reconstruction with multiple RGB-D cameras. The proposed system uses four consumer RGB/Depth (RGB-D) cameras, each located at approximately $90^{\circ}$ from the next camera around a freely moving human body. A single mesh is constructed from the captured point clouds by iteratively removing the estimated overlapping regions from the boundary. A cell-based mesh construction algorithm is developed, recovering the 3D shape from various conditions, considering the direction of the camera and the mesh boundary. The proposed algorithm also allows problematic holes and/or occluded regions to be recovered from another view. Finally, calibrated RGB data is merged with the constructed mesh so it can be viewed from an arbitrary direction. The proposed algorithm is implemented with general-purpose computation on graphics processing unit (GPGPU) for real-time processing owing to its suitability for parallel processing.

• Human Ecology Research
• /
• v.57 no.2
• /
• pp.159-170
• /
• 2019

The growth accelerator period from a child's body into an adult body is a huge transition characterized by rapid growth in the near term. Body shape changes at this time of growth should be continually studied because they can result in different outcomes due to various variables. This study is basic study for the production of a junior brassiere patternmaking was conducted to separate the upper torso and breasts of adolescents by growth level. Analysis was conducted by age classification according to sales trends. In this study. 3D body shape data of Korean girls, Based on the 6th Size Korea data, analyzed statistically the upper body and breast according to the rate of growth. The results of this study represent the basis for the development of a junior brassiere to help lead a better life in regards to clothing. The study used 3D-data from girls aged 13 to 18. The analysis indicates that the upper body is in a different shape at age 15 with an increasing circumference, width and shoulder length of the chest; in addition, the sides are analyzed differently, suggesting that the brassiere configuration should be made differently at age 15. The breast form also showed different growth patterns at age 13 and the result was that the shape of the cup in brassiere should be configured differently depending on type.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.3
• /
• pp.528-542
• /
• 2024

The aim of this study was to analyze and typify the body shape of tall women aged 20-69 using 3D measurement data from the 2020 8^th Human Dimensions Survey data with greater than 165.0 cm in height defined as large stature. Each body type's characteristics were examined to derive points of differentiation compared to women of average body type. The analysis showed that as height increases, body height, length, and generally body circumference, thickness, and width also increase. However, taller women were found to have thinner waists, indicating a wider, flatter waist area. Waist circumference was also smaller, albeit not at a statistically significant level. Body shapes of adult women over 165.0 cm tall were classified into three types. The following body types were analyzed: thick ankles and drooping shoulders, thin and short torso, tall and long, long torso and thick ankles, large body circumference, thickness and width, normal torso length, and short stature and thin ankles. To develop garments for adult women over 165.0 cm tall, a new drafting method was required set the waist, knee height, and shoulder width.

• Fashion & Textile Research Journal
• /
• v.20 no.6
• /
• pp.722-732
• /
• 2018

This study was to develop a dress form that is highly representative of the body shapes of senior men in their 50s and 60s. And this research was compared the measurements and forms of three different dress forms available in the market, in order to analyze the body type and suitability and provide a standard for developing and utilizing the dress forms. After extracting the body shapes of the senior men's 3D shape, the body type that is curvature on the back prevalent among senior men, was chosen. The dress form was created as follows: 3D modeling and rendering, printing with a FDM-type 3D printer. The dress forms were 3D-scanned and the 3D data was analyzed - classification drop value, area deviation, compared horizontal section and vertical section. The results were as follows: This suggested that the area deviation amount at the chest and hip circumference levels was larger in the commercial products than in the dress form in this study, while that at the waist circumference level was larger in the dress form in this study. The vertical length of the lateral shoulder point-waist circumference was smaller, the side shape showed severe curvature on the back, and the waist circumference was larger in the senior men dress form than the commercial products. The dress form developed in this study reflected the body type of senior men and, therefore, were suitable for fitting when creating clothes for senior men.

• Journal of the Korean Society of Visualization
• /
• v.10 no.1
• /
• pp.55-59
• /
• 2012

Reverse Design(RD) plays an important role in simulation engineering, such as CFD (Computational Fluid Dynamics) and Virtual Engineering and Design. RD becomes much more valuable when there is no shape data of the practical models for CFD grid generations. In this study, two-camera based rapid prototyping(RP) system is proposed. 3D-PTV based measurement algorithm was adopted. The developed system was applied to reconstruct three-dimensional data of a human face, a motorcycle model, a cylindrical body and a triangular pyramid.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.2
• /
• pp.204-214
• /
• 2019

A CAD program has recently been introduced that can be directly developed into a three-dimensional human body shape and made into a pattern. It is possible to fabricate a bra that reflects the volume and surface area of the breast; however, it still needs to be verified. This study investigates the average size and shape of 20 big-breasted women and designs a brassiere pattern for women with large breasts using a 3D Flattening function of OptiTex PDS v15.6. In addition, the study verifies the reliability of the proposed method compared to a conventional brassiere pattern. The study results are as follows. First, the three dimensional measurement values were smaller than the direct measurement dimensions when the three dimension measurement dimensions of the subjects were compared with the direct measurement dimensions, the replica measurement dimensions and the three dimensional measurement dimensions. Second, the 3D flattening pattern reflects the actual shape, length, and area of the actual breast when comparing a brassiere pattern using a 3D shape and pattern reflecting the direct measurement.

• The Research Journal of the Costume Culture
• /
• v.26 no.2
• /
• pp.188-202
• /
• 2018

This study aimed to categorize women's body shapes by type after extracting prototypes of 25~34 year old Korean woman. The standardizing research service project conducted by the Ministry of Commerce, Industry and Energy in 2005, divided the age ranges of adult women into three groups: 18~24 years (young), 25~34 years (young-adult) and 35~49 years (adult). This study utilized this age division method to create a concrete body type categorization schema with the most marriageable period, 25 to 34 years old as target age the target age group. We used, measurement data from the 7th Korean Human Body Size Survey (Size Korea) for the body shape analysis. We completed a statistical analysis using the statistical program SPSS 21. After creating the body types using CLO 3D, which is based on the 7th Korean human body measurements, we input data for the average size for each type into the Avata. We then compared and analyzed the cross sections using the Rapidform XOR program. The results of the type-specific characteristics are as follows: big square body of obese body, small square body of plain flat body with tall, plain square body of plain flat with short, triangular body of lower body obesity there was. Significantly, the results of this study should facilitate the development of various apparel products using mass customization or easy-order systems.

• Journal of Fashion Business
• /
• v.26 no.6
• /
• pp.32-46
• /
• 2022

The purpose of this study is to explore a three-dimensional (3D) simulation of skirt shape concepts by manipulating circumferences and lengths via parametric design in the fashion design concept stage. This study also intends to propose a modeling method that can judge and transform the shape through immediate parameter adjustment. We looked at cases that utilized parametric design in other fields of fashion design, reviewed and analyzed the variables used in each study, and constructed parameters suitable to implement skirt fashion design. The traditional design elements required for skirt design, namely waist and hip circumferences, were set as variables in this study. The parametric design was developed to generate ideas of two skirt silhouettes (tight and flared) and three lengths (mini, knee-length, and maxi). To apply the skirt design implemented through variables to the actual 3D human shape, the shape data of women in their 20s and 30s were randomly selected from the 5th human data of Size Korea. Skirt design silhouette modeling was performed by adjusting the variable values according to body type. Parametric design has the potential to help develop design ideas in the field of fashion design, considering the method and characteristics of parameters of the variety of variables and rapid modification. Furthermore, if systematic research on variables and options among fashion design elements is conducted, the possibility of converging them into customization or co-design fashion design processes could be confirmed.

• Journal of the Korea Computer Graphics Society
• /
• v.8 no.4
• /
• pp.1-7
• /
• 2002

This paper presents a new approach for modeling human limbs shape from 3D scan data. Based on the cylindrical structure of limbs, the overall shape is approximated with a set of ellipsoids through ellipsoid fitting and interpolation of fit-ellipsoids. Then, the smooth domain surface representing the coarse shape is generated as the envelope surface of ellipsoidal sweep, and the fine details are reconstructed by constructing parametric displacement function on the domain surface. For fast calculation, the envelope surface is approximated with ellipse sweep surface, and points on the reconstructed surface are mapped onto the corresponding ellipsoid. We demonstrate the effectiveness of our approach for skeleton-driven body deformation.