• 터널과지하공간
• /
• 제13권6호
• /
• pp.465-475
• /
• 2003

본 논문은 지하공동이 건설되는 지역을 대상으로 공동내 지하수 유입량을 계산하기 위하여 영국의 AEA Technology에서 개발한 NAPSAC과 NAMMU를 이용하여 수치 모델링을 실시하였다. 이것은 3차원의 파쇄된 매질에서 지하수 유동에 대하여 아주 유효한 유한요소 소프트웨어 패키지이다. 모델링에 사용된 입력자료는 지표조사, 시추조사, 단일공 수리시험 자료 등을 이용하여 산출하였다. 공동내 지하수 유입량을 보다 정확히 산출하기 위하여 이방성 수리전도도를 고려하였으며 이방성 수리전도도값은 연구지역에 분포하는 균열체계의 확률적 분포특성이 반영된 균열망에서 역산되었다. 연속체 개념의 수치모델링을 통하여 평수기, 갈수기와 풍수기시의 지하 공동내 유입량, 유동시간, 유동경로의 변화를 계산하였다.

• 대한원격탐사학회지
• /
• 제36권6_1호
• /
• pp.1393-1405
• /
• 2020

무인항공기(UAV: Unmanned Aerial Vehicle)는 저고도 비행으로 인해 고해상도 영상을 취득할 수 있으며, 수시촬영이 가능하여 지도제작에 있어 수시갱신이 가능하다. 이러한 이점으로 인해 무인항공기 영상을 이용한 대축척 수치지도 제작 가능성에 대한 연구가 활발히 진행되고 있다. 정밀한 수치지도는 디지털트윈이나 스마트시티의 기반 데이터로 활용될 수 있다. 정밀한 수치지도를 제작하기 위해서는 지상기준점을 이용한 정밀 센서모델링이 반드시 선행되어야 한다. 본 연구에서는, 자체 개발한 정밀 센서모델링 알고리즘을 통해 무인항공기 영상의 기하모델을 수립하였다. 그리고 수치지도를 제작하여 대축척 수치도화 가능성을 평가하였다. 연구 데이터는 인천 간석동과 서울 여의도를 대상으로 영상 및 지상기준점을 취득하였다. 정밀 센서모델링 정확도 분석 결과, 두 지역에 대해서 체크 점 평균오차 3 픽셀 이내, RMSE 4 픽셀 이내의 높은 정확도를 확인하였다. 수치도화 정확도 분석 결과, 국토지리정보원에서 고시한 1:1,000 세부도화 수평오차(0.4 m) 및 표고오차(0.4 m)를 만족하는 범위의 정확도를 확인하였다. 따라서 본 연구에서 자체개발한 정밀 센서모델링 기술은 무인항공기 영상의 1:1,000 대축척 수치도화 제작 가능성을 시사한다.

• 터널과지하공간
• /
• 제32권2호
• /
• pp.144-159
• /
• 2022

본 연구에서는 지반의 열-수리-역학적 복합거동을 모델링하기 위한 순차적 접근법 기반의 시뮬레이터를 개발하고 적용된 연계해석 알고리즘의 계산성능을 분석하였다. 본 연구의 순차적 연계해석에서는 다공성 매질의 열 및 유체거동 분석을 위한 오픈소스 기반의 OpenGeoSys 수치코드와 역학해석을 위한 상용 소프트웨어 FLAC3D가 연동되었다. 해석해가 주어진 열-수리-역학적 복합거동 문제를 토대로 개발된 시뮬레이터에 대한 벤치마크 테스트가 수행되었다. 적용된 벤치마크 문제는 완전포화된 지반 내 점열원 작용 시 지반거동(시간에 따른 온도, 간극수압, 응력, 변형 변화)과 관계된다. 해석해와 수치해석 시뮬레이션 결과를 비교 분석하고 연계해석 시뮬레이터의 적정성을 조사하였다.

• Geomechanics and Engineering
• /
• 제36권4호
• /
• pp.367-380
• /
• 2024

Investigations has shown that the correct estimation of the effective amplification period is as important as the amplification value itself. It gets more important in 2D basins. This study presents a quantitative coefficient for consideration of the nonlinearity effect in terms of amplification value and the shift in its period which is missing or ineffectively considered in the previous studies. To attain this goal, by the application of a time domain fully nonlinear method, the deviation of the more common equivalent linear results from the basin nonlinear behavior under strong ground motions is investigated quantitatively. Also, despite the increase in the damping ratio, the possibility of the increase in the amplification due to the increase in motion strength is shown. To make the results useful in engineering practice, by introducing nonlinearity ratio, the effect of the nonlinearity is quantitatively estimated for two soft and stiff clayey basins with three different depths under a set of motions scaled to two target spectrum. Results show that at the 100 m depth soft clayey basin, while the nonlinearity ratio shows a 35% deviation at the basin edge part under DD1 motion level, its effect moves to the central part with 20% effect under DD3 motion level. By the increase in depth to 150 m, the results show a decrease in the overall effect of the nonlinear behavior for both clay types. At this depth, the nonlinearity ratio gives a 30% and 17% difference on a limited distance from outcrop at the soft clayey basin under DD1 and DD3 motion levels, respectively. At the 30 m depth basins, the nonlinearity ratio shows up to 25% difference for different cases. The presented ratio would be introduced as nonlinearity coefficients for consideration of the nonlinearity effects in the codes. The presented quantitative margins will help the designer to have a better understanding of the amplification period change because of nonlinearity over 2D basin surface.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.36-42
• /
• 2008

In a gas insulated substation (GIS), Very Fast Transient Over-voltages (VFTOs) are generated due to switching operations and ground faults. These fast transients are associated with high frequency components of the order of a few hundreds of MHz. These transients may cause internal faults i.e., layer-to-layer faults or minor faults in a capacitively graded bushing, which is one of the important pieces of terminal equipment for GIS. In the present study, the PSPICE model has been developed to calculate the voltage distribution across the layers of 420kV graded bushing for high frequency pulses of rise time 1 to 50ns, which simulate the VFTO. For this simulation, an equivalent electrical network of bushing with different equivalent layers has been considered. The effect of different equivalent layers modeling circuits on the non-uniform voltage factor has been analysed. The influence of copper strip inductance on voltage distribution across layers has also been analysed for various rise times of high frequency transients. Finally, the leakage current of the bushing is calculated for evaluating the bushing condition under these transients.

• 자원환경지질
• /
• 제32권4호
• /
• pp.385-398
• /
• 1999

The Narim gold mine is located approimately 200km southeast of Seoul within the Muju mineralized district of the Sobaegsan gneiss complex, Korea. Environmental geochemistry were undertaken for various kinds of water (surface, ground and mine water) collected of April, September and November in 1998 from the narim mine creek. Hydrogeochemical compositions of water samples are characterized by the relatively significant enrichment of Na+K, alkali ions, $HCO_{3}$, $NO_{3}$, Cl and F in groundwater, wheras the mine and surface waters are relatively enriched in Ca+Mg, hea표 metals and $SO_{4}$. Therefore, the groundwaters belong to the (Na+Ca)-( $HCO_{3}+SO_{4}$) type, respectively. The pH and EC values of the non-mining creek surfers are relatively lower compared with those of the surface water of the mine and ore dump area. The d values ($\delta$D-8$\delta^{18}$O) of all kinds of water from the Narim mine creek are 5.8 to 13.1 The range of $\delta$D and $\delta^{18}$O values (relative to SMOW) are shown in distinct two groups as follows: for the April waters of -64.8 to -67.8$\textperthousand$ and -9.6 to -10.0$\textperthousand$(d value=10.1 to 13.1), and for the November waters of -65.9 to -70.2$\textperthousand$ and -9.3 to -9.6$\textperthousand$ (d value=5.8 to 7.9), respectively. This range variation indicates that two group water were composed of distinct waters with seasonal difference. Geochemical modeling showed that mostly toxic metals (As, Fe, Mn, Ni, Pb, Zn) may exist largery in the from of metal $(M2^+)$ and metal-sulfate $(MSO_4\;^{2-$\mid$),\; and \;SO_4^{2-$\mid$}$ concentration influenced the speciation of heavy metals in the meteoric water. These metals in the groundwater could be formed of $CO_3 \;and \;(OH)_3$ complex ions. Using computer program, saturation index of albite, calcite, dolomite in meteoric water show undersaturated and progreddively evolved toward the saturation state, however, ground and mine water are nearly saturated. The gibbsited water-mineral reaction and stabilities suggest that the weathering of silicate minerals may be stable kaolinite, illite and Nasmectite. The clay minerals will be transformed to more stable kaolinite owing to the contiunous reaction.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 특별 심포지엄
• /
• pp.73-87
• /
• 2009

Geophysical survey for unconformity-type uranium deposit applied to this study area in Athabaska Basin, Canada were carried out airborne TEM and magnetic, resistivity-induced polarization (DC-IP), puser seismic reflection and well-logging method. The results of airborne survey interpreted the lithological boundary, geological structures, and conductors. Also, these results decided to main targets for ground DC-IP survey. The Low resistivity and the high chargeability slices of 3D modeling interpreted from DC-IP survey response for conductors related to hydrothermal alteration zones and fault-controlled graphitic zones occurring at the unconformity-type uranium deposit, and they confirmed by diamond drilling. Seismic results interpreted to lake bottom surface, alluvium layer and intra-sandstone faults. We suggest the resonable field data acquisition of DC-IP method on the land or the lake in Athabaska Basin.

• 한국지진공학회논문집
• /
• 제20권2호
• /
• pp.79-89
• /
• 2016

If scour is occurred at shallow foundation of bridge, seismic performance of the bridge will be reduced. In order to evaluate accurate seismic response of bridge according to scour depths, modeling of foundation reflecting scour effect is important. In this study, taking into account the effect of the reduction in embedment depth of the shallow foundation by scouring, the soil around the foundation is modelled as an equivalent soil spring with various stiffness. Seismic fragility analyses for 3 types of bridges subjected to 4 types of ground motions classified into Site Class A, B, C, D are evaluated according to several scour depths. From the fragility analysis results, it can be observed that the deeper the scour depth, the higher probability of exceeding damage states. Also, seismic failure probability of asymmetric bridge is higher than that of symmetric bridge.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.248-251
• /
• 2005

To investigate the degeneration process in the intervertebral disc, a three dimensional (3D) poroelastic finite-element (FE) model was developed. Disc was modeled as two different regions, such as annulus modeled with fiber reinforced 20 node poroelastic ground matrix and nucleus having large porosity. Excess Von Mises stress in the disc element assumed to be a possible source of degeneration under compressive loading condition. Recursive calculation was continued until the desired convergence was attained by changing the permeability and porosity of those elements, which could be predicted from the previous iteration. The degenerated disc model showed that relatively small compressive stresses were generated in the nucleus elements compared to normal disc. Its distribution along the sagittal plane was matched well with a previously reported experimental result. Contrasts to this result, pore pressures in the nucleus were higher than those in the normal disc. Total stress indicated similar values for two different models. This new approach using poroelastic modeling could provide the explanation of the interaction between fluid and solid matrix in the disc during the degeneration process.

• 한국지열·수열에너지학회논문집
• /
• 제19권4호
• /
• pp.39-52
• /
• 2023

This study analyzes the energy performance of a elderly care center building and the applicability of a ground source heat pump (GSHP) system through simulation approach. For this purpose, a building information modeling (BIM) program and an energy performance calculation program were used. The impact of the mechanical ventilation system on the energy requirements of the heating and cooling system and the indoor environment was also analyzed, focusing on the change in indoor carbon dioxide (CO₂) concentration, which is a representative indicator of the indoor environment (air quality). The simulation results showed that the target building exceeds Level 7 in terms of simulated primary energy consumption or actual energy consumption. In addition, it was analyzed that the target building could not maintain the indoor CO₂ concentration below the standard concentration by natural ventilation through window opening alone. Combining the GSHP system with the mechanical ventilation system (Case B and Case C) can further reduce the overall energy consumption by reducing the amount of outdoor air introduced by opening windows. The cost savings compared to the baseline case are estimated to be 67.3% for Case A, 63.7% for Case B, 65.5% for Case C, and 42.5% for Case D. It is necessary to analyze the impact of various renewable energy technologies and passive ones on the energy performance and indoor environment of elderly care centers.