• 대한화장품학회지
• /
• 제34권4호
• /
• pp.303-309
• /
• 2008

건강한 피부 기능의 악화 원인으로는 콜라겐 섬유 감소, 탄력섬유 변성, 활성산소종의 과다 생성 등이 있다. 이로 인하여 피부 탄력 저하나 주름이 생성된다. 피부 탄력 저하 및 주름 생성과 같은 피부 노화를 개선하기 위해 대표적으로 비타민 A, C 및 그 유도체들이 화장품에 적용되고 있지만 화학적 불안정성의 문제점이 있어 새로운 유도체들의 합성 개발에 노력을 기울이고 있다. 본 연구에서는 피부개선을 위한 화장품 원료로 최근 비타민 C로부터 새롭게 합성된 3-O-cetyl-L-ascorbic acid (VCCE)의 주름 개선과 관련된 효능 효과를 평가하였다. VCCE의 in vitro 실험 결과 procollagen type I의 합성을 0.002%에서 최대 149% 증가시켰다. 또한 인체적용시험에서 일차적으로 폐쇄 첩포 실험 결과 자극이 유발되지 않았으며, 모사판 분석 및 PRIMOS system을 이용한 주름측정결과에서도 주름개선효과를 확인하였다. 결과적으로, VCCE는 주름 개선을 위한 화장품 성분으로서 높은 응용 가치를 제시한다.

• 대한화장품학회지
• /
• 제37권1호
• /
• pp.91-96
• /
• 2011

외부 자극에 대하여 개개인의 건강한 피부를 유지하는데 있어서 악화 원인으로는 콜라겐 섬유 감소, 탄력섬유 변성, 멜라닌 생성, 활성산소종 등이 있다. 이로 인한 피부탄력감소 및 기미, 잡티 등의 피부 문제점을 개선하기 위해 대표적으로 비타민 A, C 및 그 유도체들이 화장품에 적용되고 있지만 안정성의 문제점이 있어 새로운 유도체들의 합성 개발에 노력을 기울이고 있다. 본 연구에서는 피부개선을 위한 화장품 원료로 비타민 C로부터 새롭게 합성된 3-o-cetyl-L-ascorbic acid (VCCE)의 미백 개선과 관련된 효능 효과를 평가하였다. VCCE의 in vitro 실험 결과 멜라닌의 합성을 $20\;{\mu}g/mL $에서 대조군과 비교하여 최대 44 % 억제시켰으며 세포 내 tyrosinase 발현을 저해하였다. 또한 인체적용시험에서 자외선 조사에 의한 인공 색소 침착을 유발한 후 8주 동안 피부 밝기를 측정한 결과 8주 후 통계적으로 유의한 수준의 피부 미백 효과를 나타내었다. 결론적으로 VCCE는 미백 개선을 위한 화장품 성분으로서 높은 응용 가치를 제시한다.

• 디지털융복합연구
• /
• 제10권10호
• /
• pp.333-338
• /
• 2012

인적자원관리는 IT기술을 접목하여 다양한 변화를 가져오고 있다. 특히 HRM이 집단차원의 관리, 물리적 사업장, 근무시간의 제약, 개인적 접촉 등 비과학적 방법으로 이루어졌다면, 현재의 전자적 인적자원관리(e-HRM)는 개별 차원의 관리, 가상 작업 공간의 등장(예. 스마트워크센터, 홈워크 등), 근무시간의 유연화 및 탄력화, 컴퓨터 기반의 통계자료 및 과학적 방법에 의한 분석 및 관리를 근간으로 이루어지고 있다는 점에서 큰 차이가 있다. 따라서 환경의 변화에 따라 기업들은 보다 효율적이고 전략적인 인적자원 관리 체계를 구축하기 위하여 RFID 카드, 지문인식 근태관리 시스템 등 다양한 기술을 도입하고 있다. 본 논문에서는 효율적인 전사적 인적자원 관리를 위한 멀티 카메라를 이용하여 2D 및 3D 얼굴인식기술 기반의 근태관리, 출입통제관리 시스템을 개발하였다. 여기서는 기존 2D방식의 얼굴인식기술이 가지고 있는 문제점인 조명 및 자세에 따른 인식률 저하를 극복하여 90% 이상의 인식률을 확보하였다. 또한 3D 얼굴인식방식의 문제점인 많은 계산량을 개선하기 위하여 3D와 2D 인식기술을 병행하여 처리함으로써 하이브리드 영상인식 및 인식속도를 개선할 수 있었다.

• 한국공간구조학회논문집
• /
• 제4권4호
• /
• pp.113-128
• /
• 2004

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of solid paraboloidal and complete (that is, without a top opening) paraboloidal shells of revolution with variable wall thickness. Unlike conventional shell theories, which are mathematically two-dimensional (2-D), the present method is based upon the 3-D dynamic equations of elasticity. The ends of the shell may be free or may be subjected to any degree of constraint. Displacement components $u_r,\;u_{\theta},\;and\;u_z$ in the radial, circumferential, and axial directions, respectively, are taken to be sinusoidal in time, periodic in ${\theta}$, and algebraic polynomials in the r and z directions. Potential (strain) and kinetic energies of the paraboloidal shells of revolution are formulated, and the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four digit exactitude is demonstrated for the first five frequencies of the complete, shallow and deep paraboloidal shells of revolution with variable thickness. Numerical results are presented for a variety of paraboloidal shells having uniform or variable thickness, and being either shallow or deep. Frequencies for five solid paraboloids of different depth are also given. Comparisons are made between the frequencies from the present 3-D Ritz method and a 2-D thin shell theory.

• Structural Engineering and Mechanics
• /
• 제53권3호
• /
• pp.411-427
• /
• 2015

Based on linear elastic theory of quasicrystals, various equations and solutions for quasicrystal beams are deduced systematically and directly from plane problem of two-dimensional quasicrystals. Without employing ad hoc stress or deformation assumptions, the refined theory of beams is explicitly established from the general solution of quasicrystals and the Lur'e symbolic method. In the case of homogeneous boundary conditions, the exact equations and exact solutions for beams are derived, which consist of the fourth-order part and transcendental part. In the case of non-homogeneous boundary conditions, the exact governing differential equations and solutions under normal loadings only and shear loadings only are derived directly from the refined beam theory, respectively. In two illustrative examples of quasicrystal beams, it is shown that the exact or accurate analytical solutions can be obtained in use of the refined theory.

• 전기학회논문지P
• /
• 제51권3호
• /
• pp.149-154
• /
• 2002

In this paper, we propose a new graphic deformation algorithm for haptic interface system. Our deformable model is based on non-linear elasticity, anisotropy behavior and the finite element method. Also we developed controller for high-speed communication. The proposed controller is based on the PCI/FPGA technology, which could progress the capability of the position calculating and the force data transmitting. The haptic system is composed of the 6DOF force display device, the high-speed controller, HIR library for 3D graphic deformation algorithm and the haptic rendering algorithm. The developed system will be used on constructing the dynamical virtual environment. We demonstrate the relevance of this approach for the real-time simulating deformations of elastic objects. To show the efficiency of our system, we programmed the simulation of force reflecting. As the result of experiment, we found that it has high stability and easy to control for deformable object than some other systems.

• Computers and Concrete
• /
• 제8권3호
• /
• pp.357-369
• /
• 2011

In this study, effect of steel fibers on toughness and some mechanical properties of concrete were investigated. Hooked-end steel fibers were used in concrete samples with three volume fractions (${\nu}_f$) of 0.5%, 0.75% and 1% and for two aspect ratios (l/d) of 45 and 65. Compressive and flexural tensile strength and modulus of elasticity of concrete were determined for cylindrical, cubic and prismatic samples at the age of 7 and 28 days. The stress-strain curves of standard cylindrical specimens were studied to determine the effect of steel fibers on toughness of steel-fiber-reinforced concrete (SFRC). In addition, the relationship between compressive strength and the flexural tensile strength of SFRC were reported. Finally, a simple model was proposed to generate the stress-strain curves for SFRC based on strains corresponding to the peak compressive strength and 60% of peak compressive stress. The proposed model was shown to provide results in good correlation with the experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.95-99
• /
• 1996

The form accuracy of parts has become an important parameter. Therefore dimensional tolerance and geometric tolerance are used in design to satisfy required quility and functions of parts. But the informations for machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among these parameters. Finally, a methodology is proposed for getting the optimal grinding condition for precision workpiece The results are as follows; The effects of work speed and depth of cut on workpiece shape are ignorable compared to the effect of traverse speed. These is the optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing when the traverse speed is increased.

• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.141-147
• /
• 2012

Engine mount is used to soften the impact of bumper with elasticity recovery and damping capacity. Inner noise and vibration to influence the comfortableness for passenger cause the engine to the chattering phenomenon. In this study, structural analysis can be done by engine mounts designed with 3D modelling. Natural frequencies and harmonic responses are analyzed by using models with some kinds of configurations. When the simulation model is applied by the force of 600N within the range of natural frequencies, the magnitude of deformation becomes 0 to 3mm. As the number of holes around inside mount increases, the capability of vibration absorption and durability becomes larger. In case of 5holes around inside mount, it can be safest on durability. The life of mount becomes larger by changing the configuration of model. The engine mount improved with durability can be designed through the result of simulation.

• Structural Engineering and Mechanics
• /
• 제42권3호
• /
• pp.313-334
• /
• 2012

This paper examines the problem of a penny-shaped crack in a thermoporoelastic body. On the basis of the recently developed general solutions for thermoporoelasticity, appropriate potentials are suggested and the governing equations are solved in view of the similarity to those for pure elasticity. Exact and closed form fundamental solutions are expressed in terms of elementary functions. The singularity behavior is then discussed. The present solutions are compared with those in literature and an excellent agreement is achieved. Numerical calculations are performed to show the influence of the material parameters upon the distribution of the thermoporoelastic field. Due to its ideal property, the present solution is a natural benchmark to various numerical codes and simplified analyses.