• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.9
• /
• pp.768-773
• /
• 2005

A new approach for human foot modelling and last design based on the cross sectional method is presented in this paper. The proposed last design method utilizes the dynamic trimmed parametric patches for the foot 3D data and last 3D data. The cross section a surface of 3D foot for the 3D last, design modeling of free form geometric last shapes. The proposed last design scheme wraps the 3D last data surrounding the measured 3D foot data with the effect of deforming the last design rule The last design rule of the FFD is constructed on the FFD lattice based on foot-last shape analysis. In addition, the control points of FFD lattice are constructed with cross sectional data interpolation methods from the a finite set of 3D foot data. The deformed 3D last result obtained from the proposed FFD is saved as a 3D dxf foot data. The experimental results demonstrate that the last designed with the proposed scheme has good performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.5
• /
• pp.700-712
• /
• 1997

The flowfield generated by a 2-D rotating cylinder on a plane moving at freestream velocity was experimentally investigated in a wind tunnel to simulate aerodynamic characteristics of rotating wheels of an automobile. In the flowfield around a rotating cylinder at 3*10$^{3}$ < Re$_{d}$<8*10$^{3}$, unique mean flow and turbulence characteristics were confirmed by hot-wire measurements as well as frequency analysis, which was supported by flow visualization. In the vicinity of a rotating cylinder, a unique turbulence structure on .root.over bar u'$^{2}$ profiles was formed in hump-like shape at 1 < y/d < 3. A peak frequency which characterized the effect of a rotating cylinder had the same value of the rotation rate of a cylinder. In case of cylinder rotation, the depths of mean velocity -defect and turbulent-shear regions were thickened by 20-40% at 0 < x/d < 10 compared with the case of cylinder stationary. Far downstream beyond x/d > 10, the flowfield generated by a rotating cylinder showed self-similarity in the profiles of mean velocity and turbulence quantities. The effect of a rotating cylinder was independent of its rotation rate and Reynolds number in the measurement range.

• The Journal of the Korean dental association
• /
• v.16 no.7 s.110
• /
• pp.531-536
• /
• 1978

Adult cats were light anesthetized with ethyl ether and heart was removed fastly. cardiac papillary muscle was dissected from heart in organ bath con taining Tyrode solution saturated with 95% O₂+5% CO₂, and prepared papillary muscles were placed in Tyrode solution that was continuously circulated and gassed with 95% O₂+5% CO₂at 32℃. The isolated papillary muscle was stimulated continuously with platinum pin electrode at frequency of 15/min and 90/min by means of electric stimulator and transmembrane action potentials were recorded with microelectrdes on the oscilloscope. The drug used was d-propranolol and its concentration was 0.5, 1.5 and 5.0 mg/L. The results obtained were as follows: 1. D-propranolol increased the threshold voltage of papillary muscle and raised by average of 213.6% of control. 2. D-propranolol had no effect on duration of action potential. 3. Conduction time of isolated papillary muscle was increased by d-propranolol and its effect was prominent at frequency of 90/min. 4. the maximum upstroke velocity was decreased by d-propranolol and its effect was dose-depndent decrease.

• Journal of Chest Surgery
• /
• v.27 no.1
• /
• pp.9-14
• /
• 1994

Substance P[SP] has been known to be a peptide which may be plays a role as a neurotransmitter in central nervous system as well as peripheral autonomic nervous system. It has been reported that SP was widely distributed in the nerve of the tracheal smooth muscle and induced the muscle contraction. However, definite action mechanism of SP in the tracheal smooth muscle was not clear, yet. Thus, present experiment was performed to elucidate an effect of substance P and an action mechanism on contraction of the smooth muscle in rabbits. In order to find a neural mechanism to the effect of SP on the tracheal smooth muscle contraction, atropine sulfate, tetrodotoxin, propranol and phentolamine were administered at 10 min before the addition of SP. Otherwise,to find effect of SP antagonists on the action of SP, [D-Pro2, D-Try7,9]SP, [D-Arg1, D-Pro2, D-Trp7,9, Leu11]SP and [D-Pro4, D-Trp7,9]SP were administered as a same fashion. These following results were obtained. 1] SP induced contraction of the tracheal smooth muscle under resting condition and the contraction was increased dose-dependently. 2] Cholinergic blocker[atropine], neural blocker[tetrodotoxin] and adrenergic blocker[propranol and phentolamine] didn`t have an effect on the contractile response. 3] Three SP antagonists inhibited the contractile response. 4] Isoproterenol relaxed the contraction induced by SP. The above results suggested that SP induced contraction of the tracheal smooth muscle directly act to the smooth muscle in rabbits. The autonomic nervous system did not seem to participate in the SP action.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.182-187
• /
• 2019

To improve the mechanical properties of glass-fiber-reinforced polypropylene (PP) composites through interfacial adhesion control between the PP matrix and glass fiber, the surface of the glass fiber was modified with PP-graft-maleic anhydride (MAPP). Surface modification of the glass fiber was carried out through the well-known hydrolysis-condensation reaction using 3-aminopropyltriethoxy silane, and then subsequently treated with MAPP to produce the desired MAPP-anchored glass fiber (MAPP-a-GF). The glass-fiber-reinforced PP composites were prepared by typical melt-mixing technique. The effect of chemical modification of the glass fiber surface on the mechanical properties of composites was investigated. The resulting mechanical and morphological properties showed improved interfacial adhesion between the MAPP-a-GF and PP matrix in the composites.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2142-2144
• /
• 2015

3D FLS is a active sonar that can represent the underwater inside visually in forward direction. We discuss on the decrease of bubbles from breaking waves in 3D FLS frames. In the experiment using the bubbles reduction filter the effect of bubbles was decreased a lot.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1225-1233
• /
• 2008

In this paper, the 2D/3D converting algorithm is proposed. The single frame of 2D image is used fur the real-time processing of the proposed algorithm. The proposed algorithm creates a 3D image with the depth map by using the vertical position information of a object in a single frame. In order to real-time processing and improve the hardware complexity, it performs the generation of a depth map using the image sampling, the object segmentation with the luminance standardization and the boundary scan. It might be suitable to a still image and a moving image, and it can provide a good 3D effect on a image such as a long distance image, a landscape, or a panorama photo because it uses a vertical position information. The proposed algorithm can adapt a 3D effect to a image without the restrictions of the direction, velocity or scene change of an object. It has been evaluated with the visual test and the comparing to the MTD(Modified Time Difference) method using the APD(Absolute Parallax Difference).

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.60-65
• /
• 1996

Degradation of the optical communication system due to the stimulated Brillouin scattering effect in the optical fiber is measured, and its suppression is demonstrated. In the externally modulated 2.5 Gb/s transmission experiment, bit error rate is increased due to the stimulated Brillouin scattering effect when the signal power (linewidth 3 MHz) incident into the dispersion shifted fiber is larger than 10 dBm. SBS effect is suppressed completely, up to 15 dBm of transmission power, by broadening the source linewidth to 200 MHz.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.107-113
• /
• 2019

In this study, we examined the feasibility of considering the transverse edge effect of flat type linear induction motor as 2D finite element analysis (FEA) by changing the resistivity of secondary conductor. For this purpose, the 3D FEA analysis results were compared with the 2D FEA analysis results with the change of the resistivity of the secondary conductors. As a result, simply changing the resistivity could not accurately account for the transverse edge effect of LIM because of leakage components that could not be considered by 2D FEA.

• Journal of The Korean Association of Information Education
• /
• v.23 no.5
• /
• pp.469-480
• /
• 2019

One of the goals of the new 2015 revised curriculum is to cultivate the creativity of students who will live in the era of the Fourth Industrial Revolution to create new things through diverse ideas and challenges based on basic learning skills. Accordingly, in order to solve the given problems rationally, the convergence problem solving ability that can process and utilize various areas of knowledge and information is becoming important. Therefore, in this study, we designed the integrative education using a 3D printer based on Tinkercad modeling and applied it to the class to investigate the effect on the improvement of computing thinking ability of elementary school students. To verify the contents of the study, two classes of 25 sixth-grade elementary school students were divided into an experimental group and a controlled group. For the experimental group, 12 classes of convergence education programs using a 3D printer were applied for about three months, and the same amount of general curriculum was conducted for the control group. After that, the t-tests were carried out using the pre-post test to measure the effectiveness of the computational thinking ability. After the application of the program, the experimental group showed statistically significant improvement in computational thinking ability, but the controlled group showed no statistically significant difference. The results show that convergence education using the Tinkercad modeling-based 3D printer has a positive effect on the improvement of computing thinking ability of elementary school students.