• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.61-67
• /
• 2011

Stereoscopic 3D video can be transmitted by frame-compatible packing format to fulfill the compatibility requirement with the existing digital TV. Then, the reduced stereo image needs to be expanded to the original size at the receiver. This paper proposes an adaptive interpolation method for the discarded image lines. The horizontal line-based linear filter and NEDI6 filter are used selectively for the interpolation of each pixel. Experimental results show that the NEDI6 combined with the horizontal line-based linear filter yields better image quality than the bilinear method by around 0.6dB.

• Journal of Broadcast Engineering
• /
• v.19 no.3
• /
• pp.342-354
• /
• 2014

This paper deals with digital watermarking methods to protect ownership of image with targeting the ultra-high multi-view or free-view image service in which an arbitrary viewpoint image should be rendered at the user side. The main purpose of it is not to propose a superior method to the previous methods but to show how difficult to construct a watermarking scheme to overcome the viewpoint translation attack. Therefore we target the images with various attacks including viewpoint translation. This paper first shows how high the error rate of the extracted watermark data from viewpoint-translated image by basic schemes of the method using 2DDCT(2D discrete cosine transform) and the one using 2DDWT(2D discrete wavelet transform), which are for 2D image. Because the difficulty in watermarking for the viewpoint-translated image comes from the fact that we don't know the translated viewpoint, we propose a scheme to find the translated viewpoint, which uses the image and the corresponding depth information at the original viewpoint. This method is used to construct the two non-blind watermarking methods to be proposed. They are used to show that recovery of the viewpoint affect a great deal of the error rate of the extracted watermark. Also by comparing the performances of the proposed methods and the previous ones, we show that the proposed ones are better in invisibility and robustness, even if they are non-blind.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1259-1268
• /
• 2004

To organize training in limited training area for an actuai combat, realistic training simulation plugged in by various battle conditions is essential. In this paper, we propose a virtual target overlay technique which does not use a virtual image, but Projects a virtual target on ground-based CCD image by appointed scenario for a realistic training simulation. In the proposed method, we create a realistic 3D model (for an instructor) by using high resolution Geographic Tag Image File Format(GeoTIFF) satellite image and Digital Terrain Elevation Data (DTED), and extract the road area from a given CCD image (for both an instructor and a trainee). Satellite images and ground-based sensor images have many differences in observation position, resolution, and scale, thus yielding many difficulties in feature-based matching. Hence, we propose a moving synchronization technique that projects the target on the sensor image according to the marked moving path on 3D satellite image by applying Thin-Plate Spline(TPS) interpolation function, which is an image warping function, on the two given sets of corresponding control point pair. To show the experimental result of the proposed method, we employed two Pentium4 1.8MHz personal computer systems equipped with 512MBs of RAM, and the satellite and sensor images of Daejoen area are also been utilized. The experimental result revealed the effective-ness of proposed algorithm.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.242-245
• /
• 2009

This paper proposes an algorithm that increases the speed of generating a Fresnel hologram using a recursive addition operation covering the whole coordinate array of a digital hologram. The 3D object designed to calculate the digital hologram used the depth-map image produced by computer graphics (CG). The proposed algorithm is a technique that performs CGH (computer generated hologram) operation with only the recursive addition from the hologram's whole coordinates by analyzing the regularity between the 3D object and the digital hologram coordinates. The experimental results showed that the proposed algorithm increased operation speed by 30% over the technique using the conventional CGH equation.

• The Research Journal of the Costume Culture
• /
• v.30 no.5
• /
• pp.732-751
• /
• 2022

In this study, we aimed to apply 3D digital printing to basic clothing production and to propose futuristic fashion design and production methods that correspond to contemporary trends. Literature on future trends, dynamism, mechanical aesthetics, and experimentalism were used to define the characteristics of "futurism." Based on theoretical considerations about futurism, we created fashion designs using 3D digital printing methods. These designs were produced using the aesthetic characteristics of futurism; the 3D digital clothing program; and application of digital printing technologies to futuristic silhouettes, colors, and materials. The results were as follows: First, with the application of futurism as a fashion motif, we pursued collaboration between artistic work and fashion, and we then explored the possibility of creative expression. Second, harmony between achromatic and chromatic colors revealed even better dynamism and activeness, and the potential to express dynamism was observed. Third, with the development of fashion design processes based on 3D digital printing methodologies, it was found to be possible to eliminate the limitations of time and space, solve problems related to limited budget or communication, and positively influence the fashion industry by enhancing convenience and diversity. Fourth, with the development of fashion design that utilizes digital printing, it was found that problems related to time, space, or limited budget were able to be solved, as compared to the use of traditional printing and image reproduction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1703-1710
• /
• 2017

This paper propose a 3D point clouds (depth) security technique for digital holographic display service. Image contents encryption is a method to provide only authorized right owners with the original image information by encrypting the entire image or a part of the image. The proposed method detected an edge from a depth and performed quad tree decomposition, and then performed encryption. And encrypts the most significant block among the divided blocks. The encryption effect was evaluated numerically and visually. The experimental results showed that encrypting only 0.43% of the entire data was enough to hide the constants of the original depth. By analyzing the encryption amount and the visual characteristics, we verified a relationship between the threshold for detecting an edge-map. As the threshold for detecting an edge increased, the encryption ratio decreased with respect to the encryption amount.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.243-248
• /
• 2013

In this paper, depth of foreground is analysed by focus and color analysis grouping for 2D/3D video conversion and depth of foreground progressing method is preposed by using focus and motion information. Candidate foreground image is generated by estimated movement of image focus information for extracting foreground from 2D video. Area of foreground is extracted by filling progress using color analysis on hole area of inner object existing candidate foreground image. Depth information is generated by analysing value of focus existing on actual frame for allocating depth at generated foreground area. Depth information is allocated by weighting motion information. Results of previous proposed algorithm is compared with proposed method from this paper for evaluating the quality of generated depth information.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.418-421
• /
• 2007

It is important to maintain information by application or 3D modeling through the satellite and UAV image which is a real world. The prevention business has recognized the need for accurate 3-D geospatial information around the disaster region to identify objects to 3D modeling. In this paper, we presented an approach to create 3D model and loading, processing the image using GIS techniques, and the digital topographic maps were used for the DEM and the features of the area. The result is a implementation of the simple application that illustrates the objects in 3-D. The presented approach will be used for identifying objects and assisting in regional planning around the airfields.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.658-663
• /
• 2003

A process of 3-D stereo particle image velocimetry(PIV)was developed for the measurement of an illuminated sliced section field of 3-D complex flows. The present method includes modeling of camera by a calibrator based on the homogeneous coordinate system, transformation of the oblique-angled image to the right-angled image, identification of 2-D velocity vectors by 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criteria, and finally 3-D display as the post processing. An experimental system was also used for the application of the proposed method. Two high speed digital CCD cameras and an Argon-Ion Laser for the illumination were adopted to clarify the time-dependent characteristics of the leading edge extension(LEX) in a highly swept shape applied to a delta wing found in modern air-fighters.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.4
• /
• pp.49-56
• /
• 2017

It is the approach of embedded system design that finds 3D scanning technology to analyze a real object or environment to collect data on its shape and appearance. 3D laser scanning developed during the last half of 20th century in an attempt to accurately recreate the surfaces of various objects. 1960s, early scanners used lights, cameras, and projectors to carry out the scanning in the lacks of performance which encountered many difficulties with shiny, mirroring, or transparent objects. The 3D scanning technology has leveled-up with helpful of embedded software platform research and design. In this paper, First we designed the hardware of laser/camera setup and turntable moving part which is the base of object. Second, we introduced the process of scanning 3D data with software and analyzed the resulting scanned image on the web server. Last, we made the 3D scanning embedded device with 3D printing model and experimented the 3D scanning performance with Raspberry Pi.