• Journal of Yeungnam Medical Science
• /
• 제32권2호
• /
• pp.90-97
• /
• 2015

Background: Contrast-induced nephropathy (CIN) can cause serious adverse effects. To reduce the occurrence of CIN related computed tomography (CT) in emergency patients, we assessed the respective roles of serum creatinine (SCr) alone and estimated glomerular filtration rate (eGFR) as an early predictor for CIN related CT. Methods: For patients with SCr <1.5 mg/dL who underwent CT in emergency department (ED) between September 2012 and October 2013, we assessed the prevalence of CIN and its adverse effects. The Modification of Diet in Renal Disease Study (MDRD) and Cockcroft-Gault (CG) formula was used for the calculation of eGFR. Practical calculation was performed by electronic medical record (EMR) system for MDRD and internet calculating service for CG. And we investigated the prevalence of CIN in eGFR $<60mL/min/1.73m^2$ before CT. Results: A total of 1,555 patients were enrolled. The prevalence of CIN after CT was 4.6% and it showed correlation with renal deterioration, increased in-hospital mortality, and prolonged hospitalization. Despite baseline SCr <1.5 mg/dL, among enrolled patients, 11.3% as MDRD equation and 29.5% as CG formula were $<60mL/min/1.73m^2$ and in this condition, the prevalence of CIN was significantly high (odds ratio was 2.87 [1.64-5.02] as MDRD equation and 2.03 [1.26-3.29] as CG formula). Conclusion: Just SCr <1.5mg/dL was not appropriate to recognize preexisting renal insufficiency, but eGFR using MDRD equation was useful in predicting the risk of CIN related CT in ED. Using EMR, calculation of eGFR can be easier and more convenient.

• Journal of Ginseng Research
• /
• 제42권4호
• /
• pp.540-548
• /
• 2018

Background: Acute hepatic failure is a life-threatening critical condition associated with rapid deterioration of liver function and liver transplantation. Several studies have shown that Panax ginseng Mayer has antidiabetic and hepatoprotective effects. However, the hepatoprotective effect of ginseng berry is still unveiled. In this study, we evaluated the hepatoprotective effects of ultrasonication-processed ginseng berry extract (UGBE) on acute hepatic failure model in rats. Methods: Ginseng berry extract (GBE) was ultrasonically processed. The GBE, silymarin, and UGBE were orally administered to male Sprague-Dawley rats for 4 wk. Twenty-four h after the last administration, rats were challenged with D-galactosamine (D-GalN)/lipopolysaccharide (LPS). Results: After ultrasonication, the component ratio of ginsenosides Rg2, Rg3, Rh1, Rh4, Rk1, Rk3, and F4 in GBE had been elevated. Administration of UGBE significantly increased the survival rate of D-GalN/LPS-challenged rats. Pretreatment with UGBE significantly decreased serum alanine aminotransferase, aspartate aminotransferase, and total bilirubin levels in D-GalN/LPS-challenged rats in a dose-dependent manner. The levels of enzymatic markers for oxidative stress (superoxide dismutase, glutathione peroxidase, catalase, and glutathione) were increased by UGBE treatment in a dose-dependent manner. Tumor necrosis factor alphalevel, inducible nitric oxide synthase activities, and nitric oxide productions were reduced by UGBE treatment. In addition, hemeoxygenase-1 levels in liver were also significantly increased in the UGBE-treated group. The protein expression of toll-like receptor 4 was decreased by UGBE administration. Hematoxylin and eosin staining results also supported the results of this study showing normal appearance of liver histopathology in the UGBE-treated group. Conclusion: UGBE showed a great hepatoprotective effect on D-GalN/LPS-challenged rats via the toll-like receptor 4 signaling pathway.

• 유기물자원화
• /
• 제17권1호
• /
• pp.49-57
• /
• 2009

본 연구에서는 UASB 반응조를 이용한 슬러리형 돈사폐수의 혐기성 소화시 암모니아 부하의 영향을 평가하였다. UASB 반응조는 $0.02{\sim}0.96kg{NH_4}^+-N/m^3/day$ 범위의 NVLR로 운전되었으며, 정상상태에서 biogas내 메탄함량은 73.3~77.9%였다. FA 농도는 메탄생성미생물의 저해 범위까지 증가하였으나, 메탄함량을 고려할 때, FA와 TA로 인한 저해는 발생하지 않았다. NVLR이 증가함에 따라 COD 제거율은 악화되었으며, $0.55kg{NH_4}^+-N/m^3/day$ 이하의 부하에서 COD 제거율을 60% 이상으로 유지할 수 있었다. NVLR이 0.09에서 $0.96kg{NH_4}^+-N/m^3/day$로 증가함에 따라, biogas의 생성량은 3.71에서 9.14L/day로 증가하였으며, COD의 메탄으로 전환율은 0.32에서 $0.20m^3CH_4/kg$으로 감소하였다. FA농도, COD 제거율, 메탄생성률 등을 고려할 때, UASB 반응조는$0.40kg{NH_4}^+-N/m^3/day$ 이하의 NVLR로 운영되어야 한다.

• 대한의생명과학회지
• /
• 제20권3호
• /
• pp.156-161
• /
• 2014

It has been reported that safflower seeds have preventive effects against osteoporosis. Recently, safflower buds (SB) were found to have more useful functional ingredients than safflower seeds. In the current study, we evaluated the anti-osteoporosis effects of SB diet in ovariectomized (OVX) rats. The rats were divided into five groups; sham operated group, OVX alone group, OVX plus $17{\beta}$-estradiol ($E^2$ $10{\mu}g/kg$, i.p.) and OVX plus SB diet feeding group (0.3% or 1%). Feeding of SB diet (0.3% or 1%) to OVX rats markedly increased bone mineral density (BMD) of femurs, compared to the OVX group. The OVX rats exhibited a marked increase in trabecular separation (Tb.Sp) and this change was inhibited by the feeding of SB diet, similar to that seen with OVX+E2 group. Moreover, feeding of SB diet to OVX rats decreased the markers of bone turnover, including osteocalcin and alkaline phosphatase (ALP). These results suggest that SB extract has a bone sparing effect in OVX-induced trabecular bone loss and prevents deterioration of bone microarchitecture by suppressing the rate of bone turnover. Therefore, SB may be useful for preserving bone mass and structure in estrogen deficient women with a potential role in reducing postmenopausal osteoporosis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.31-35
• /
• 2002

It is hard to expect excellent electrical, mechanical and chemical properties from most of the composite materials presently used as insulators due to insufficient wettability property caused by the difference of interfacial properties between the matrix material and the reinforcer. Therefore, various interfacial coupling agents have been developed to improve the interfacial properties of composite materials. But if the wettable coupling agents are used outdoor for a long time, change in quality takes place in the coupling agents themselves, bringing about deterioration of the properties of the composite materials. In this study, composite materials were put to dry interfacial treatment by use of plasma technology. It has been presented that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. Also, the surface resistance rate and dielectric property were improved.

• 대한한방내과학회지
• /
• 제26권2호
• /
• pp.291-301
• /
• 2005

Objective : Anticancerous and host safety effects of the combination of Astragali Radix and chlorambucil are studied when it is applied to leukemia cell(P388D1 cell) related disease. Methods : After 5 groups of mice are treated by respective procedures (HG, CHL, HG+CHL, etc), the quantitative analyses (cell proliferation assay, mutagenesis test, survival rate, weight shift observation, tissue and blood analyses, etc) are conducted. Results : While sole injection of Astragali Radix extends the survival period and deter the liver and marrow function deterioration, combined injection (HG+CHL) shows more strong anticancerous effect than sole injection of Astragali Radix or Cholrambucil, and also does not cause any mutation on the normal cells and virulence on marrow and liver caused by leukemia. Conclusions : The combined application of Astragali Radix and chlorambucil has more effective anticancerous and host safety effects than independent use of them.

• 한국주조공학회지
• /
• 제26권1호
• /
• pp.17-26
• /
• 2006

The substitution of cooling method from water quenching to air cooling after solution heat treatment was aimed for the development of a convenient and economical heat treatment process of duplex stainless steels without deterioration of mechanical and corrosion resistant properties for the industry. In order to achieve this goal, the mechanical properties and corrosion properties of a ASTM A890-4A duplex stainless steel were systematically investigated as functions of casting condition and cooling method after solution heat treatment. A 3-stepped sand mold and a permanent Y-block mold were used to check the effects of solidification structure and cooling rate after solution heat treatment. The microstructural characteristics such as the ferrite/austenite phase ratio and the precipitation behavior of ${\sigma}$ phase and carbides were investigated by combined analysis of OM and SEM-EDX with an aid of TTT diagram. Hardness and tension test were performed to evaluate the mechanical properties. Impact property at $-40^{\circ}C$ and corrosion resistance were also examined to check the possibility of the industrial application of this basic study. Throughout this investigation, air-cooling method was proved to effectively substitute for water-quenching process after the solution heat treatment, when the duplex stainless steel was sand mold cast with a thickness below 15 mm or permanent mold cast with a thickness below 20 mm.

• 한국지진공학회논문집
• /
• 제17권3호
• /
• pp.117-125
• /
• 2013

Seismic isolation has been considered and utilized in various industries as a way to prevent huge damage on to structures by large earthquakes in various industries. The laminated Laminated rubber bearings is are most frequently used in seismic isolation systems. The structural Structural safety could not be assured unless the performance of the rubber bearing is not guaranteed for the life time of the structure under the consideration that the bearing is a critical structural member to sustain vertical loads in the seismically isolated structure. However, there are few studies on the deterioration problems of rubber bearings during their service life. The long term performance of the rubber bearings was not considered in past designs of seismically isolated structures. This study evaluates the long term performance and creep characteristics of laminated natural rubber bearings that are used in seismically isolated buildings. For the this study, a set of accelerated thermal aging tests and creep tests are were performed on real specimens. The experimental results show that the natural rubber bearings would have a stable change rate of change for durability under severe environmental conditions for a long time.

• 열처리공학회지
• /
• 제31권5호
• /
• pp.220-230
• /
• 2018

The objective of this study is to investigate the effect of solution treatment on the microstructure and corrosion behavior of cast AZ91-4%RE magnesium alloy. In the as-cast state, microstructure of the AZ91-4%RE alloy was characterized by intermetallic ${\beta}(Mg_{17}Al_{12})$, $Al_{11}RE_3$ and $Al_2RE$ phase particles distributed in ${\alpha}-(Mg)$ matrix. After solution treatment, the ${\beta}$ particles with low melting point dissolved into the matrix, but Al-RE phases still remained due to their high thermal stabilities. It was found from the immersion and potentiodynamic polarization tests that corrosion rate of the AZ91-4%RE alloy increased after the solution treatment. On the contrary, EIS tests and EDS compositional analyses on the surface corrosion products indicated that the stability of the corrosion product was improved after the solution treatment. Examinations on the corroded microstructures for the ascast and solution-treated samples revealed that dissolution of the ${\beta}$ particles which play a beneficial role in suppressing corrosion propagation, would be responsible for the deterioration of corrosion resistance after the solution treatment. This result implies that the microstructural features such as amount, size and distribution of secondary phases that determine corrosion mechanism, are more influential on the corrosion rate in comparison with the stability of surface corrosion product.

• 한국건축시공학회지
• /
• 제23권1호
• /
• pp.45-56
• /
• 2023

본 연구는 PC공법에 적용되는 실링재를 대상으로 수밀성 측면의 내구성 평가방안 마련의 타당성을 검토하기 위하여 진행하였다. 이를 위해 관련 KS표준의 품질기준에 동일하게 만족하는 실링재 5종을 선정하여 시험을 진행하였으며, 시험결과 5종의 실링재 중 3개 실링재가 바탕면과의 탈락 및 균열 등 수밀성 저하를 나타냈으며, 2종의 경우 육안관찰 상 큰 변화는 없었으나, 추가분석을 통해 소재의 응력 저하율의 차이가 크게 발생하는 것을 확인할 수 있었다. 이에 상기 결과를 근거로 향후 실링재 간 수밀성 측면의 성능검토 필요성을 확인하였으며, 이를 기반하여 제품 선정 시 활용 가능한 수밀성 평가방안의 타당성을 정량적으로 확인하였다.