• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.453-466
• /
• 2008

In order to examine the generation mechanism of long ocean waves along the west coast of Korea and to understand the amplification process of the long ocean waves, sea level, atmospheric pressure and wind data observed every minute from 2007 March 29 to 2007 April 1 were analyzed and onedimensional numerical ocean model experiments were performed. An atmospheric pressure jump propagated southeastward from Backryungdo to Yeonggwang along the west coast of Korea with speed of $13{\sim}27\;m/s$ between 2007 March 30 23:00 and 2007 April 1 1:30. Average magnitude of pressure jump was 4.2 hPa. As a moving atmospheric jump propagated from north to south along the coast, long ocean waves were generated and the sea level abnormally rose or fell at Anheung, Kunsan, Wido and Yeonggwang. Average amplitude of sea level rise (or fall) was about 113.6 cm. In a one-dimensional numerical ocean model, nonlinear shallow water equations were numerically integrated and a moving atmospheric pressure jump with traveling speed of 24 m/s was used as an external force. While the atmospheric pressure jump travels over 60 m depth ocean, a long ocean wave is generated. Because the propagation speed of the atmospheric jump is almost equal to that of the long ocean wave, Proudman resonance occurs and the long ocean wave amplifies. As the atmospheric pressure jump moves into the coastal area shallower than 60 m, the speed of the long ocean wave decreases and Proudman resonance effect decreases. However, the amplitude of the long ocean wave increases and wave length becomes shorter because of shoaling effect. When the long ocean wave hits the land boundary, amplitude of the long ocean wave drastically amplifies due to reflection. Data analysis and numerical experiments suggest that the southeastward propagation of an atmospheric pressure jump over the shallow ocean, which is a necessary condition for Proudaman resonance, generated the long ocean waves along the west coast of Korea on 2007 March 31 and the ocean waves amplified due to shoaling effect in the coastal area and reflection at the shore.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.26-35
• /
• 2006

In this paper, an automatic mobile robot system for a intelligent path planning using the detection scheme of the spatial coordinates based on stereo camera is proposed. In the proposed system, face area of a moving person is detected from a left image among the stereo image pairs by using the YCbCr color model and its center coordinates are computed by using the centroid method and then using these data, the stereo camera embedded on the mobile robot can be controlled for tracking the moving target in real-time. Moreover, using the disparity map obtained from the left and right images captured by the tracking-controlled stereo camera system and the perspective transformation between a 3-D scene and an image plane, depth information can be detected. Finally, based-on the analysis of these calculated coordinates, a mobile robot system is derived as a intelligent path planning and a estimation. From some experiments on robot driving with 240 frames of the stereo images, it is analyzed that error ratio between the calculated and measured values of the distance between the mobile robot and the objects, and relative distance between the other objects is found to be very low value of $2.19\%$ and $1.52\%$ on average, respectably.

• Solar Energy
• /
• v.2 no.2
• /
• pp.29-36
• /
• 1982

The Solar Energy R&D Department of KIER under the auspice of the Korean government is pushing hard on the development of the passive solar technology with high priority for the expeditious widespread use of solar energy in Korea, since the past few years of experiences told us that the active solar technology is not yet ready for massive commercialization in Korea. KIER has completed the construction of the Solar Energy Research & Test Center in Seoul, which houses the major facilities for its all solar test programs. The Center was designed as a passive solar building with great emphasis on the energy conserving ideas. The Center is not only the largest passive building in Korea, but also the exhibit center for the effective demonstration of the passive heating and cooling technology to the Korean public. The Center was designed to satisfy the requirements based on the technical and economical criteria set by the KIER. Careful considerations, therefore, were given in depth in the following areas to meet the requirements. 1) Passive Heating Concepts The Center employed the combination of direct and indirect gain system. The shape of the Center is Balcomb House style, and it included a large built-in sunspace in front. A partition, consists of transparent and translucent glazings, separates the sunspace and the living space. Since most activities in the Center occur during the day time, direct utilization of the solar energy by the living spaces was emphasized with the limited energy storage capacity. 2) Passive Cooling Concepts(for Summer) Natural ventilation concept was utilized throughout the building. In the direct gain portion of the system, the front glazing can be openable during the cooling season. Natural convection scheme was also applied to the front sunspace for the Summer cooling. Reflective surfaces and curtains were utilized wherever needed. 3) Auxiliary Heat ing and Cooling System As an auxiliary cooling system, mechanical means(forced convection system) were adopted. Therefore forced air heating system was also used to match the duct work requirements of the auxiliary cool ing system. 4) Effect ive Insulation & Others These included the double glazed windows, the double entry doors, the night glazing insulation, the front glazing-frame insulation as well as the building skin insulation. All locally available construction materials were used, and natural lightings were provided as much as possible. The expected annual energy savings (compared to the non-insulated conventional building)of the Center was estimated to be about 80%, which accounts for both the energy conservation and the solar energy source. The Center is being instumented for the actual performance tests. The experimental results of the simplified tests are discussed in this paper.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.34.2-35
• /
• 2018

Galaxy transition from star-forming to quiescent, accompanied with morphology transformation, is one of the key unresolved issues in extragalactic astronomy. Although several environmental mechanisms have been proposed, a deeper understanding of the impact of environment on galaxy transition still requires much exploration. My Ph.D. thesis focuses on which environmental mechanisms are primarily responsible for galaxy transition in different environments and looks at what happens during the transition phase using multi-wavelength photometric/spectroscopic data, from UV to mid-infrared (MIR), derived from several large surveys (GALEX, SDSS, and WISE) and our GMOS-North IFU observations. Our multi-wavelength approach provides new insights into the *late* stages of galaxy transition with a definition of the MIR green valley different from the optical green valley. I will present highlights from three areas in my thesis. First, through an in-depth study of environmental dependence of various properties of galaxies in a nearby supercluster A2199 (Lee et al. 2015), we found that the star formation of galaxies is quenched before the galaxies enter the MIR green valley, which is driven mainly by strangulation. Then, the morphological transformation from late- to early-type galaxies occurs in the MIR green valley. The main environmental mechanisms for the morphological transformation are galaxy-galaxy mergers and interactions that are likely to happen in high-density regions such as galaxy groups/clusters. After the transformation, early-type MIR green valley galaxies keep the memory of their last star formation for several Gyr until they move on to the next stage for completely quiescent galaxies. Second, compact groups (CGs) of galaxies are the most favorable environments for galaxy interactions. We studied MIR properties of galaxies in CGs and their environmental dependence (Lee et al. 2017), using a sample of 670 CGs identified using a friends-of-friends algorithms. We found that MIR [3.4]-[12] colors of CG galaxies are, on average, bluer than those of cluster galaxies. As CGs are located in denser regions, they tend to have larger early-type galaxy fractions and bluer MIR color galaxies. These trends can also be seen for neighboring galaxies around CGs. However, CG members always have larger early-type fractions and bluer MIR colors than their neighboring galaxies. These results suggest that galaxy evolution is faster in CGs than in other environments and that CGs are likely to be the best place for pre-processing. Third, post-starburst galaxies (PSBs) are an ideal laboratory to investigate the details of the transition phase. Their spectra reveal a phase of vigorous star formation activity, which is abruptly ended within the last 1 Gyr. Numerical simulations predict that the starburst, and thus the current A-type stellar population, should be localized within the galaxy's center (< kpc). Yet our GMOS IFU observations show otherwise; all five PSBs in our sample have Hdelta absorption line profiles that extend well beyond the central kpc. Most interestingly, we found a negative correlation between the Hdelta gradient slopes and the fractions of the stellar mass produced during the starburst, suggesting that stronger starbursts are more centrally-concentrated. I will discuss the results in relation with the origin of PSBs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.263-271
• /
• 2010

This trial was conducted to determine the effects of feeding a diet containing solid-state fermented rapeseed meal on performance, nutrient digestibility, intestinal ecology and intestinal morphology of broiler chickens. A mixed liquid culture, containing approximately 5 log cfu/ml Lactobacillus fermentum, Enterococcus faecium, Saccharomyces cerevisae and Bacillus subtilis was prepared in a 1:1:1:1 ratio. A basal substrate (BS) containing 75% rapeseed, 24% wheat bran and 1% brown sugar was mixed with the liquid culture in a ratio of 10:3. Over the 30-day fermentation, isothiocyanates were reduced from 119.6 to 14.7 mmol/kg. A total of 168, day-old male Arbor Acres broiler chicks were assigned to one of three dietary treatments including a corn-soybean meal based control diet as well as two experimental diets in which the control diet was supplemented with 10% of the BS containing unfermented rapeseed meal or 10% of the BS containing rapeseed meal subjected to solid state fermentation. There were 8 pens per treatment and 7 birds per pen. From days 19-21 and days 40-42, uncontaminated excreta were collected from each pen for digestibility determinations. In addition, digesta from the colon and ceca were collected to determine the number of lactobacilli, enterobacteria and total aerobes. The middle sections of the duodenum, jejunum, and ileum were collected for intestinal morphology. Over the entire experimental period (d 1-42), the weight gain and feed conversion of birds fed fermented rapeseed meal were superior (p<0.05) to that of birds fed nonfermented rapeseed meal and did not differ from the soybean control. On day 42, birds fed fermented rapeseed meal had higher (p<0.05) total tract apparent digestibility coefficients for dry matter, energy, and calcium than birds fed non-fermented rapeseed meal. Colon and ceca digesta from broilers fed the fermented feed had higher (p<0.05) lactobacilli counts than birds fed the control and non-fermented rapeseed meal diets on day 21 and 42. Fermentation also improved (p<0.05) villus height and the villus height:crypt depth ratio in the ileum and jejunum on day 21 and 42. The results indicate that solid-state fermentation of rapeseed meal enhanced performance and improved the intestinal morphology of broilers and may allow greater quantities of rapeseed meal to be fed to broilers potentially reducing the cost of broiler production.

• Journal of the Korean Arthroscopy Society
• /
• v.7 no.2
• /
• pp.183-188
• /
• 2003

Purpose : The purpose of this study is to evaluate the results of revision surgery for failed anterior cruciate ligament (ACL) reconstruction using quadruple hamstring tendon autograft. Materials and Methods : From May 2000 to July 2002, six patients received ACL revision surgery using quadruple hamstring autograft for failed ACL reconstruction. Femoral tunnels were made 40 mm in depth and fixed with a cross pin and a bioabsorbable interference screw to fill the bone defect. In tibial tunnels, the grafts were fixed with Intrafix(Mitek, Norwood, MA). In case of tibial tunnel widening, additional screw-washer fixation was done. Follow up was at least 12 months postoperatively. Clinical assessments consisted of Lysholm knee scores, International Knee Documentation Committee(IKDC) evaluation form and manual maximal side to side difference using KT-2000 arthrometer. Results : The average Lysholm knee score improved from 77.2 preoperatively to 87.7 postoperatively. At the final IKDC evaluation, 1 case was graded as normal, 4 nearly normal, 1 abnormal. Mean side to side difference of manual maximum anterior displacement using the KT-2000 arthrometer was 1.8mm. The success rate was $83\%$. Conclusion : ACL revision surgery using quadruple hamstring autograft with double fixation is considered good procedure with successful results.

• The Korean Journal of Quaternary Research
• /
• v.9 no.1
• /
• pp.33-42
• /
• 1995

우리나라의 서해(West Sea)는 일명 황해(Yellow Sea)라고 일컬어지는 약 40여 m의 평균 수심을 갖는 대륙붕 해저지형 분지에 의하여 지배되는 전형적 육연해이다, 그런데 이 바다는 중심부(황해의 중심부)를 기준으로 하여 중국 대륙의 산동반도에서 양가강 하구에 이르는 서부 해안을 가지며 북부에는 발해만의 해안이 있고 동부에는 서해(황해) 특유의 넓 은 조수환경(tidal environment)과 조수해안이 발달한다. 그러나 남쪽으로는 북서태평양과 연결된다. 한국 서해안이 평균 4m 이상의 조차(tidal range)를 나타내는 조간대 조수환경이 며 조간대 해저지형(intertidal morphology)이 전형적인 퇴적층(체)에 의하여 지배되는 여러 가지 특징을 나타낸다. 서해안 조수환경은 네델란드, 독일 또는 지배되는 여러 가지 특징을 나타낸다. 서해안 조수환경은 네델란드 독일 또는 미국의 경우와 같이 연구가 잘되어 세계 적으로 널리 알려진 소위 barrier island system and tidal depositional environments와는 크 게 다른 퇴적과정과 환경이다. 경기도 남양만의 조수 환경의 경우, 조간대 해저지형 요소인 조류로(tidal channel)와 조간대 정규해저(intertidal zone proper)에 관한 동력적 퇴적과정 연 구결과 조간대 특유의 lateral sedimentation 과 vertical sedimentation 2가지 퇴적과정중 후 자의 퇴적과정이 우세한 것으로 밝혀졌고 이러한 퇴적과정의 진행이 매우 안정한 지속성을 가지는 것이 특징이다, 이러한 퇴적과정의 조간대 퇴적물의 쇄설 입자는 약 20% 미만의 모 래(sand) 입자 50~70%의 실트(silt) 와 점토(clay) 입자가 20~30%에 달하는 입자조직 (grain texture)의 퇴적상을 나타낸다. 결과적으로 조간대의 동력적인 조수수괴의 수위(level of tidal water)는 평균 만조선과 평균 저조선으로 한정되며 이것은 퇴적과정과 퇴적작용의 조정(control) 요인으로 조간대 퇴적상의 발달과 분포에 큰 영향을 미친다, 예를들면 남양만 등의 대부분의 서해안 조간대 표층 퇴적상(녁\ulcorner미 sedimentary faci-es)은 만조선에서 간조 선에 가까울수록 조립화현상(coarsening trend)을 나타낸다. 이러한 퇴적상 변화는 저조선에 서 만조선으로의 조간대 지형과 주조수로의 지형.수력학적 특성이 다음과 같기 때문이다. a) a general decrease in width b) a general decrease in depth c) a general decrease in maximum and average current velocities d) a general increase in contents of suspended mud e) a general decrease in grain size of the bottom sand and an increasing abundance of muddy deposits. 우리나라 서해안 조간대 퇴적층(체)의 수직 층서(vertical stratigraphy)는 지난 3여년동안의 수십개의 vibracoring(주상시추)에 의하여 매우 흥미롭고 중요하게 밝혀지고 있는바 이것은 현세(Holocene)와 선현세(preHolocene: 11000 years BP)의 오랜시간 경과에 따른 조수환경 변화의 수직퇴적 과정과 기후 해수면 변화의 현상에 원인이 있다고 해석된다.(박용안 외, 1992-1995)결과적으로 서해안 조수퇴적체(층)의 분지주변(basim margin)진화과정이 밝혀지 고 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.683-689
• /
• 2017

We have carried out the development for hydraulic breaker which can be operated by optimal mode with ICT convergence technology. This developed system can predict the rock properties. Moreover, this system can maximize the energy efficient with intelligent control of hydraulic system. In order to provide the optimal impact force, this system can measure the descending depth of piston with the proximity sensor and discriminate the rock properties with the measuring data and control the piston stroke using solenoid valve eventually. In addition, we have developed the controller, display module and operating device for cascade (multi-level impact) system and applied the module which can communicate each system by wireless communications. In conclusion, the control system which can control the multi-level impact in accordance with strength of rocks has been developed and approved by several field tests.

• Journal of Technology Innovation
• /
• v.22 no.2
• /
• pp.1-30
• /
• 2014

Offset trade has been applied in Republic of Korea's defense acquisition programs since early 1980s and used for national economic development as well as enhancement of military capabilities. The accumulated offset trade value amounts to over 10 billion dollars by 2010. However, questions in regards to the effectiveness of offset trade have been constantly raised. As it is a quite difficult task to analyze and calculate the application performance of defense technologies acquired by offsets objectively, limited level of quantitative analysis of application performance have been conducted so far. Hence, in this paper, we came to understand the overall status of application of those technologies through in-depth performance analysis and suggested some specific policies for the further development of offset trade based on the analysis results. To begin with, we developed a questionnaire based on performance indicator deducted through literature review of relevant researches, and conducted survey of major offset recipients. Also, another survey of offset experts belonged to the army, government organization, research institute and companies was conducted to evaluate the performance and effectiveness of offsets qualitatively. And we analyzed the efficiency of application performance using DEA. The results of all surveys are showing that there is positive accomplishment in the technological aspect, but in economic aspect, it shows relatively inactive outcome. Based on these results, policy direction is considered to be changed from the emphasis on the acquisition of core technology to revitalization of domestic defense industry in line with new government's policy orientation.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.55-55
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.