• Ocean and Polar Research
• /
• v.32 no.1
• /
• pp.73-84
• /
• 2010

A terrestrial LiDAR was used to acquire precise and high-resolution topographical information of Malipo beach, Korea. Terrestrial LiDAR and RTK-DGPS (VRS) were mounted on top of a survey vehicle and used to scan 20 times stop-and-go method with 250 m spacing intervals at ebb tides. In total, 7 measurements were made periodically from 2008 to 2009 and after each beach replenishment event. We carried out GIS-based 3D spatial analysis such as slope and volume calculations in order to assess topographical changes over time. In relation to beach replenishment, comparative analysis of each volume change revealed them to be similar. This result indicates that the terrestrial LiDAR measurements are accurate and can be used to analyze temporal topographical changes. In conclusion, the methodology employed in this study can be used efficiently to exercise coastal management through monitoring and analyzing beach process such as erosion and deposition.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.1
• /
• pp.97-109
• /
• 2013

This study introduces an analysis of the quantitative characteristics of topography and topographical changes based on precise 3D topography through 6 times surveys from December 2008 to January 2010 using Terrestrial LIDAR on the Malipo beach. The Malipo sand beach is mostly located between 0m to 1.5m MSL. The area of the beach above 2.25m, the Mean High Water, is very small. It have characteristics of topographical change of erosion and deposition along the entire coast line which more apparently appear in the northern beach than the southern part of the beach. Erosion prevails from spring to autumn, while during winter both erosion and deposition largely occur. Volumes from first and last survey were almost equal.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.4
• /
• pp.14-21
• /
• 2013

This study examined the field application of a 3-D numerical model (LES-WASS-3D) to the estimation of the nearshore current at Songdo beach, Busan. The wave and tide conditions observed at Songdo beach during Typhoon Ewiniar (July 10, 2006) were used in a numerical simulation. The numerical wave heights were in good agreement with the field data. The spatial distributions of the wave heights, mean water levels, and mean flows obtained from the numerical simulation are discussed in relation to the bottom topographical change near Songdo beach before and after Typhoon Ewiniar. The results revealed that LES-WASS-3D is a powerful tool for estimating the nearshore current in the field.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.133-142
• /
• 2010

To monitor composition and change of the national land, intelligent topographical classifier which enables accurate classification of land-cover types from airborne LiDAR data is highly required. We developed a topographical classifier development support system cooperating with da1a mining tool WEKA to help users to construct accurate topographical classification systems. The topographical classifier development support system has the following functions; superposing LiDAR data upon corresponding aerial images, dividing LiDAR data into tiles for efficient processing, 3D visualization of partial LiDAR data, feature from tiles, automatic WEKA input generation, and automatic C++ program generation from the classification rule set. In addition, with dam mining tool WEKA, we can choose highly distinguishable features by attribute selection function and choose the best classification model as the result topographical classifier. Therefore, users can easily develop intelligent topographical classifier which is well fitted to the developing objectives by using the topographical classifier development support system.

• Journal of Korea Water Resources Association
• /
• v.39 no.1 s.162
• /
• pp.69-77
• /
• 2006

Songdo beach in Pohang City has suffered from bouts of beach erosion due to various reasons over many years. One of the most controversial issues is the extent of the harbor facilities effect on the beach erosion. In this study, the characteristics of erosion to Songdo beach were reanalysed using historical data and some aerial photos. Specifically, we set test cases based on the history of human modifications to the surrounding area and the topographic change around Songdo beach were investigated by 3D topographical deformation model. In the end, based on the results of these various kinds of investigation, this study found multiple causes of Songdo beach erosion.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.58-66
• /
• 2010

In this paper, we have constructed high-resolution topographical map of macro-tidal Malipo beach through integration of terrestrial LiDAR measurement and MBES survey data at inter-tidal zone. To acquire the enough information of inter-tidal zone, we have done terrestrial LiDAR measurement mounted on the roof of vehicle with DGPS through go-stop-scan method at the ebb tide and MBES depth surveying with tide gauge and eye staff measurement for tide correction and MSL calculation at the high tide all together. To integrate two kinds of data, we have unified the vertical coordination standard to Incheon MSL. The mean error of overlapped inter-tidal zone is about 2~6 cm. To verify the accuracy of terrestrial LiDAR, RTK-DGPS measurement have done simultaneously and the difference of Z value RMSE is about 4~7 cm. The resolution of Malipo topographical map is 50 cm and it has constructed to DEM (Digital Elevation Model) based on GIS. Now it has used as an input topography information for the storm-surge inundation prediction models. Also it will be possible to use monitoring of beach process through the long-term periodic measurement and GIS-based 3D spatial analysis calculating the erosion and deposition considering with the artificial beach transition and coastal environmental parameters.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1463-1476
• /
• 2014

In order to understand hydrodynamic and morphodynamic characteristics under wave-current interactions in an estuary, a coupled model for two-way analysis between existing 3-d numerical wave tank and newly-developed 3-d morphodynamic model has been suggested. Comparing to existing experimental results it is revealed that computed results of the newly-suggested model are in good agreement with each laboratory test result for wave height distribution, vertical flow profile and topographical change around ocean floor pipeline in wave-current coexisting field. Also the numerical result for suspended sediment concentration is verified in comparison with experimental result in solitary wave field. Finally, it is shown that the 3-D coupled Hydro-Morphodynamic model suggested in this study is applicable to morphological change under wave-current interaction in an estuary.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.371-376
• /
• 2006

Digital high resolution cameras are widely available, and are increasingly use in digital close-range photogrammetry. And photogrammetry instruments are developing rapidly and the precision is improving continuously. The building of 3D terrains of high precision are possible and the calculation of the areas or the earthwork volumes have high precision due to the development of the technique of the spatial information system using computer. Using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we try to find a effective method of acquiring basis data for 3D modeling of high-accuracy in pixel degree through digital close-range photogrammetry with bundle adjustment for digital elevation model generation.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.2
• /
• pp.53-63
• /
• 2020

In this study, the two-dimensional flow analysis model Hydro_AS-2D model was used to simulate the situation of flooding in Seongsangu and Uichang-gu in Changwon in the event of rising sea levels and extreme flooding, and the results were expressed on three-dimensional topography and the optimal evacuation path was derived using BIM technology. Climate change significantly affects two factors in terms of flood damage: rising sea levels and increasing extreme rainfall ideas. The rise in sea level itself can not only have the effect of flooding coastal areas and causing flooding, but it also raises the base flood level of the stream, causing the rise of the flood level throughout the stream. In this study, the rise of sea level by climate change, the rise of sea level by storm tidal wave by typhoon, and the extreme rainfall by typhoon were set as simulated conditions. The three-dimensional spatial information of the entire basin was constructed using the information of topographical space in Changwon and the information of the river crossing in the basic plan for river refurbishment. Using BIM technology, the target area was constructed as a three-dimensional urban information model that had information such as the building's height and location of the shelter on top of the three-dimensional topographical information, and the results of the numerical model were expressed on this model and used for analysis for evacuation planning. In the event of flooding, the escape route is determined by an algorithm that sets the path to the shelter according to changes in the inundation range over time, and the set path is expressed on intuitive three-dimensional spatial information and provided to the user.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.213-213
• /
• 2021

한국농어촌공사 농어촌연구원은 하천 및 해안분야의 다양한 수리모형실험을 수행할 수 있는 대형 수리모형실험 시설을 2018년에 구축완료하였다. 국내 최대 규모의 실험장뿐만 아니라 첨단 광학용 계측장비(PIV 및 LDV 시스템)를 연계한 전용실험수로, 대형유사실험수로 등 7종의 기능별 실험수로를 갖추고 있어 다양한 수리현상 분석을 수행할 수 있다. 최근에는 산사태의 주요 원인중 하나인 토석류 실험, 방조제 주변의 침·퇴적 실험 등을 수행하였으며, 본 연구에서는 3D 지형스캐너를 활용한 방조제 주변의 지형변동 수리모형실험에 대하여 소개를 하고자 한다. 방조제는 조수가 육지쪽으로 밀려들어와 내부개발지역이나 농지 등을 해수로부터 보호하기 위해 설치되는 외곽시설이다. 이러한 방조제 전면의 빠른 유속에 의한 침식은 배후지의 안전에 상당히 큰 문제를 야기시킨다. 방조제의 침식을 방지하기 위하여 방조제 전면에 수제공을 설치하여 수제공과 수제공 사이의 느려진 유속에 의해 방조제 전면에 토사를 퇴적시키는 방법이 있다. 본 연구에서는 방조제 전면에 수제공의 길이를 달리 설치하여 수제공 주변의 침·퇴적현상을 이동상 실험을 수행하여 분석하였다. 일반적으로 토사의 침·퇴적고를 계측하는 방법으로 일정한 격자망을 구성하여 각 지점별로 실험 전·후의 토사의 표고차를 수작업으로 계측한다. 이 경우는 실험자가 직접 측정하는 계측오차가 발생하게 되고 측정할 수 있는 지점의 수가 한계가 있어 전체적인 토사의 변화양상을 분석하기엔 어려움이 있다. 이를 해결하기 위하여 본 연구에서는 농어촌연구원이 보유하고 있는 3D 지형스캐너를 활용하여 토사의 표고차를 측정하였다. 실험에 사용한 3D 지형스캐너의 최대 측정거리는 스캐너가 설치된 중심점으로부터 반경 80m에 해당하며, 해상도는 1.6mm~50mm의 범위로 수작업으로 격자망을 구성하여 측정하는 것보다 상당히 높은 수준의 결과를 취득할 수 있으며 계측시간을 단축할 수 있는 장점이 있다. 하지만, 펄스레이저에 의한 지형스캔 방식은 수면과 같이 레이저가 투과할 수 없는 경우에는 계측이 불가능하며, 어두운 계열의 색을 스캔하는 경우 결과 분석에 주의할 필요가 있다. 본 연구에서는 이동상 재료로 안트라사이트(검은색)를 포설하였고, 검은색 계열의 실험사에도 3D 지형스캐너가 우수한 결과를 제공하는 것을 확인하였다.