• Journal of Animal Science and Technology
• /
• v.45 no.2
• /
• pp.283-296
• /
• 2003

Emulsion-type sausages were manufactured to investigate the effects of CLA-vegetable oils and CLA-lard on quality characteristics of emulsion-type sausage. Each treatments replaced pork back fat with CLA-corn oil (CLA-CO), CLA-safflower seed oil (CLA-SSO) and CLA-lard (CLA-LD) were stored during 1, 7, 14, 21 and 28 days at 4$^{\circ}C$. The changes in physico-chemical properties, texture, thiobarbituric acid reactive substances (TBARS), fatty acid composition and CLA content of each treatments were measured during 1, 7, 14, 21 and 28 days at 4$^{\circ}C$. During storage, pH of control showed higher pH value than that of CLA-vegetable and CLA-lard treatments. The pH values of all treatments was significantly low at storage 14 days (p<0.05). The color L* and a*-value of all the treatments was not significantly changed with the storage periods. Color b*-value of CLA-treatments was higher than that of control during the storage period. Fatty acids composition was changed by addition of CLA-vegetable oils and CLA-lard. All kinds of fatty acids composition were decreased with CLA replacements than that of the control. Whereas linolenic acid content extremely increased by replacement of CLA-vegetable. CLA content of CLA-treatments was extremely increased than that of the control. The cohesiveness, springness, gumminess and brittleness of CLA-LD treatment was significantly higher (P<0.05) than that of the other treatments. The TBARS value of all treatments were significantly increased (P<0.05) as the storage period was passed. TBARS of sausage products containing CLA-CO was the lowest. Summing up the a forementioned results, emulsion-type sausage manufacturing with CLA-vegetable oil and CLA-lard was not affected in physico-chemical properties and texture characteristics. Also, it may be assumed that the high quality sausage can be manufactured with the extent of storage period and CLA accumulation.

• Journal of Dairy Science and Biotechnology
• /
• v.14 no.1
• /
• pp.71-84
• /
• 1996

This study was conducted to examine the usability of sorbitol for the manufacture as low-calory ingredient and cryoprotectant against frost damage. When frozen yoghrt was made of replacing sucrose by sorbitol at yoghurt mix, the change of physicochemical and lactic acid bacteria, such as Str. thermophilus, L. bulgaricus, and mixed culture of Str. thermophilus, and L. bulgaricus(1:1), was studied during the frozen storage(-20$^{\circ}$C). During the incubation of yoghurt mix, the rapid growth of lactic acid bacteria in all sample was observed as the increase of sorbitol addition, but sample A and D were almost similar. This results suggested that sucrose could play role of effecting the growth stimulator, otherwise, sorbitol could inhibit the death of microorganism, following the genus. At the survival rate between lactic acid bacteria during freezing of -5$^{\circ}$C by ice cream freezer Str. thermophilus showed 26.19 to 34.76%, L. bulgaricus 3.97 to 5.20%, and mixed culture 17.16 to 40.87% respectively. L. bulgaricus showed the greater lethal rate than other genus. Sample C which mixed sucrose with sorbitol (1:2 ratio) was showed the lowest lethal rate. Therefore, it suggested that the use of this ration could be used for better anti-frost damage. During the storage of -20$^{\circ}$C, the number of lactic acid bacteria generally decreased in the stand point of genus and frozen storage period. The survival of lactic acid bacteria might be the addition of sorbitol which could have the effect of anti-forst damage. In all treatment, lactase activity showed the rapid decrease after freezing. During the period of frozen storage, it was shown the slow decreasing trend. In spite· of decreasing, the result during yoghurt mix incubation -5$^{\circ}$C freezing, and -20$^{\circ}$C frozen storage was different at the level. After 80 days of storage, the lactase activity was similar among all genus and sample. Despite differenting viscosity followed by genus, combination of mix, and pH, the ratio of 1 to 2(sucrose : sorbitol) showed the greatest viscosity. The water holding capacity of frozen yoghurt mix was closely related to viscosity. As increasing sorbitol amounts, hardness and cohesiveness were increased, but elastisity was decreased. The significant differences between sample was inoculated with Str. thermophilus. However, there were not significant difference from the sample inoculated with L. bulgaricus and mixed culture.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.27-37
• /
• 1994

To catch the relative importance of varietal and environmental variation in various grain quality components associated with palatability of cooked rice, grain appearance, milling recovery, several physicochemical properties of milled rice and texture or eating quality of cooked rice for rice materials of five japonica cultivars, produced at four locations of the mid-mountainous and alpine area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal and locational variations were detected in 1000-grain weight, amylose content, K/Mg ratio, gelatinization temperature, peak viscosity, breakdown and setback viscosities as compared with variety x location interaction variation. Also, marked locational variations were recongnized in milling recovery from rough to brwon rice, alkali digestibility and protein content, and significant varietal variation was caught in stickiness /hardness ratio of cooked rice. The variety x location interaction variation was especially large in quality components of grain appearance and ripening, palatability of cooked rice and consistency viscosity. One thousand kernel weight was heaviest in Jinbuolbyeo and Odaebyeo, and the unfilled grain ratio was lowest in Jinbuolbyeo. Odaebyeo showed slightly' lower ratio of intact and clear milled rice because of more chalky rice kernels compared with other cultivars. Amylose content of Jinbuolbyeo and Sobaegbyeo was about 1% lower than that of others and K/Mg ratio of Odaebyeo was the lowest one among rice materials. Odaebyeo, Sobaegbyeo and Jinbuolbyeo revealed significantly low gelatinization temperature and setback viscosity while high peak and breakdown viscosities. Cholwon rice showed the greatest kernel weight, good grain filling but lowest ratio of intact and clear milled rice while Jinbu rices exhibited the highest milling recovery from rough to brown rice and ratio of sound milled rice. Amylose content of milled rice in Jinbu rices was about 2-3% lower than those in other locations. Protein content of polished rice was about 1% lower in rice materials of middle zone than those of southern part of Korea. K/Mg ratio of milled rice was highest in Jinbu rice and potassium content was slightly higher in the rice materials of middle region than in those of southern region. Alkali digestion value and gelatinization temperature of polished rice was markedly high in Jinbu rices as compared with other locations. Breakdown viscosity was hightest in Chlown rices and next higher with the order of Hwaso>Unbong>Jinbu rices, and setback viscosity was the quite contrary tendency with breakdown. The stickiness /hardness ratio of cooked rice was relatively higher value in Cholwon rices than in the others and the palatability of cooked rice was a little better in Unbong and Cholwon rices than in Jinbu and Hwaso rices, although variety x location interaction variation was large. The rice materials can be classified largely into two groups of Jinbu and the others by the distribution on the plane of 1st and 2nd principal components (about 60% of total informations) contracted from twelve grain quality properties closely associated with eating quality of cooked rice. Also, Jinbu and the other rices were divided into two and three rice groups respectively. Varietal variation of overall rice quality was smallest in Hwaso. The most superior rice group in overall quality evaluation included Odaebyeo produced at Cholwon, Unbong and Hwaso, and Sobaegbyeo grown at Unbong

• Food Science and Preservation
• /
• v.23 no.2
• /
• pp.194-203
• /
• 2016

The purpose of this study was to investigate the properties of tteok prepared from white (Samkwang) and brown rice (Heugseol, Heugjinju). The moisture and crude protein contents of rice were 14.89~17.15% and 4.79~6.81%, respectively. The crude lipid and crude ash contents of rice were 0.48~2.66% and 0.39~1.60%, respectively. The water binding capacity of Heugjinju (141.97%) was higher than those of other rice flours. As the soaking time increased, water absorption ability was in the order of Samkwang > Heugseol > Heugjinju. Using a rapid visco analyser (RVA), the initial pasting temperature of Heugseol was the highest, and the peak viscosities of Heugseol were higher than those of other rice flours. The quality characteristics of Tteokbokki tteok were assessed after its preparation by adding different amounts of Heugseol and Heugjinju (0, 5, 10, and 20%, w/w) content. The textural properties (hardness), of Heugseol and Heugseol measured using a texture analyzer, were greater than those of the control. Sensory preference tests revealed that 10% Heugseol and, 10% Heugjinju had the highest scores in appearance, color, and overall acceptability. The sensory test results revealed that Tteokbokki tteok prepared by addition of 10% added brown rice was the best.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.1
• /
• pp.7-13
• /
• 1983

Laboratory determinations of saturated hydraulic conductivity were conducted with four soils varying in texture from sand to clay and with five waters with different salinity level. The waters varied in total dissolved solids from 1,250 to $15,000mg/{\ell}$ and in SAR from 16 to 57 and were representative of saline waters in New Mexico. Saturated hydraulic conductivities of the soils were not significantly affected by water salinity if these waters were the sole source of irrigation water. However, small additions of distilled water, assuming simulated to rain, to soils previously equilibrated with the saline waters significantly decreased soil permeability. Dispersion and short or long-distance transport of clay apparently clogged conducting pores when distilled water was introduced. Swelling was an important mechanism in reducing soil permeability only in the clay soil. The data suggest that, when saline water is the dominant irrigation source and is supplemented by rain, (1) all saline waters could be used on very sandy soils, (2) no saline waters should be used on very heavy soils, and (3) slightly saline, but not very saline, waters could be used on medium-textured soils.

• The Korean Journal of Quaternary Research
• /
• v.9 no.1
• /
• pp.33-42
• /
• 1995

우리나라의 서해(West Sea)는 일명 황해(Yellow Sea)라고 일컬어지는 약 40여 m의 평균 수심을 갖는 대륙붕 해저지형 분지에 의하여 지배되는 전형적 육연해이다, 그런데 이 바다는 중심부(황해의 중심부)를 기준으로 하여 중국 대륙의 산동반도에서 양가강 하구에 이르는 서부 해안을 가지며 북부에는 발해만의 해안이 있고 동부에는 서해(황해) 특유의 넓 은 조수환경(tidal environment)과 조수해안이 발달한다. 그러나 남쪽으로는 북서태평양과 연결된다. 한국 서해안이 평균 4m 이상의 조차(tidal range)를 나타내는 조간대 조수환경이 며 조간대 해저지형(intertidal morphology)이 전형적인 퇴적층(체)에 의하여 지배되는 여러 가지 특징을 나타낸다. 서해안 조수환경은 네델란드, 독일 또는 지배되는 여러 가지 특징을 나타낸다. 서해안 조수환경은 네델란드 독일 또는 미국의 경우와 같이 연구가 잘되어 세계 적으로 널리 알려진 소위 barrier island system and tidal depositional environments와는 크 게 다른 퇴적과정과 환경이다. 경기도 남양만의 조수 환경의 경우, 조간대 해저지형 요소인 조류로(tidal channel)와 조간대 정규해저(intertidal zone proper)에 관한 동력적 퇴적과정 연 구결과 조간대 특유의 lateral sedimentation 과 vertical sedimentation 2가지 퇴적과정중 후 자의 퇴적과정이 우세한 것으로 밝혀졌고 이러한 퇴적과정의 진행이 매우 안정한 지속성을 가지는 것이 특징이다, 이러한 퇴적과정의 조간대 퇴적물의 쇄설 입자는 약 20% 미만의 모 래(sand) 입자 50~70%의 실트(silt) 와 점토(clay) 입자가 20~30%에 달하는 입자조직 (grain texture)의 퇴적상을 나타낸다. 결과적으로 조간대의 동력적인 조수수괴의 수위(level of tidal water)는 평균 만조선과 평균 저조선으로 한정되며 이것은 퇴적과정과 퇴적작용의 조정(control) 요인으로 조간대 퇴적상의 발달과 분포에 큰 영향을 미친다, 예를들면 남양만 등의 대부분의 서해안 조간대 표층 퇴적상(녁\ulcorner미 sedimentary faci-es)은 만조선에서 간조 선에 가까울수록 조립화현상(coarsening trend)을 나타낸다. 이러한 퇴적상 변화는 저조선에 서 만조선으로의 조간대 지형과 주조수로의 지형.수력학적 특성이 다음과 같기 때문이다. a) a general decrease in width b) a general decrease in depth c) a general decrease in maximum and average current velocities d) a general increase in contents of suspended mud e) a general decrease in grain size of the bottom sand and an increasing abundance of muddy deposits. 우리나라 서해안 조간대 퇴적층(체)의 수직 층서(vertical stratigraphy)는 지난 3여년동안의 수십개의 vibracoring(주상시추)에 의하여 매우 흥미롭고 중요하게 밝혀지고 있는바 이것은 현세(Holocene)와 선현세(preHolocene: 11000 years BP)의 오랜시간 경과에 따른 조수환경 변화의 수직퇴적 과정과 기후 해수면 변화의 현상에 원인이 있다고 해석된다.(박용안 외, 1992-1995)결과적으로 서해안 조수퇴적체(층)의 분지주변(basim margin)진화과정이 밝혀지 고 있다.

• Korean journal of food and cookery science
• /
• v.26 no.3
• /
• pp.323-329
• /
• 2010

Studies on the tenderizing effect of fruits has been limited even though fig, kiwifruit, pear, and pineapple cultivated in Korea are utilized commonly during cooking for their proteolytic properties. Therefore, the characteristics of these fruits were investigated by treating beef with their crude protease extracts. The protease effects of crude protease extract from the fruits on casein and myofibrilar protein were in the following order : pineapple > kiwifruit > fig > pear. Electrophoretic analysis results found that pineapple, kiwifruit, and fig cleaved myosin heavy chain into smaller fragments. The myofibrilar fragmentation ratio of crude protease extracts was the highest for pineapple whileas the lowest for pear. Ground fruits (5% and 10%) increased amounts of soluble nitrogen and decreased shear force of beef. Pineapple was the most effective while pear was the least effective. Decrease in springiness and gumminess was observed by texture profile analysis of beef treated with fruits, especially pineapple and kiwifruit. Among the 5% treatments, pineapple and kiwifruit produced the highest tenderness. Additionally, 10% treatment was less preferable than the 5% treatment.

• Food Science of Animal Resources
• /
• v.26 no.3
• /
• pp.331-336
• /
• 2006

High purity ${\gamma}$-oryzanol was obtained from rice bran and added at 0.05%, 0.10% or 0.20% (w/w) to pork sausages. Sausages containing ${\gamma}$-oryzanol showed higher CIE $L^*\;and\;a^*$ color values than the control (p<0.05). Sausages containing ${\gamma}$-oryzanol had significantly lower hardness and chewiness in textural properties than the control (p<0.05) when determined by Instron testing machine. However, there were no differences in cohesiveness and springiness between the control and the sausages containing ${\gamma}$-oryzanol. Sausages containing >0.05% of ${\gamma}$-oryzanol had significantly lower thiobarbituric acid reactive substances (TBARS) values than the control since 12 days of storage when sausages were aerobically stored at $4^{\circ}C$ for 18 days (p<0.05). Thus, ${\gamma}$-oryzanol may have a potential application for the sausage products to inhibit lipid oxidation when used at >0.05%.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.1-26
• /
• 1993

The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.249-255
• /
• 1995

This study was conducted to investigate the effects of some soil conditioners, such as polyacrylamide(PAM), polyvinylalcohol(PVA) and Bitumen emulsion, on aggregate formation and stability, wetting angle, sorptivity and penetrability of the soil with different textures : sand, sandy loam, loam and clay loam. A pot experiment was carried out to find out the effect of treatment on the germination and growth of lettuce with three textures : sand, sandy loam and silt loam. Soil aggregates larger than 2mm in untreated soils at dry condition were naught in sand, 45% in sandy loam, 80% in loam and 90% in clay loam. Treatments of soil conditioners tended to increase the occurrence of soil aggregate larger than 2mm, which were 20~25% in sand, 55~75% sandy loam, but not affected greatly aggragate occurence in loam and clay loam. The aggregate instability was decreased by the soil conditioner treatment. The wetting angles of the soils were greatly changed by hydrophobic of Bitumen, but those were changed slightly by PVA and PAM application. The sorptivity and penetrability data indicated that the effects of different materials on these parameters differed depending upon soil texture. Application of PVA and PAM were no effect exceptive in sand. Application of Bitumen revealed that water movement was not showed in all soils. The germination rate, root weight and top plant weight of lettuce were increased in all soils by PAM treatment as compared to untreated soils. Particularly the greater effect was occurred in sand soil than in sandy loam and silt loam. PAM increased greatly the moisture content and air phase of soils.