• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.249-250
• /
• 2008

본 연구는 전년도 지형참조항법(TRN; Terrain Referenced Navigation)에 근거하는 3-D 헬리콥터 항법 시스템을 위한 알고리즘 개발의 후속 연구로서 실용적 완성을 위해 수행되었다. 본 연구에서 헬리콥터의 위성항법장치(GPS)로부터의 정보(X,Y,Z 좌표)는 자동차가 도로주행중 매 1초 간격으로 수신되는 GPGGA Code로 대체되었다. 비행체는 3차원 직교 좌표 체계(Cartesian coordinate system)로 표현되는 수치지형모델(DTM; Digital Terrain Model)상에서 시점(Origination)-종점(Destination) 분석 기법에 의해 항로를 결정한다. 본 시스템은 우선 조종사에게 지형의 사전 인식을 위해 시점-종점 주변 3차원 지형도와 항로의 종단면도를 보여준다. 본 시스템은 직접적인 지상 충돌을 피하기 위해 지형 여유 층면(Terrain Clearance Floor)의 개념을 도입, 기복 지형 표면에 일정 높이의 완충 공간을 설정한다. 본 시스템은 매초 GPS로부터 실시간 수신되는 X,Y,Z 위치와 DTM상의 x,y,z를 비교하여 만약 비행체가 완충 공간에 접근하게 되면 즉시 경고음과 메시지를 발한다. 수치지형모델은 (주)첨성대가 확보하고 있는 3초 간격의 DTM을 채택, 작성하였다.

• International Journal of Advanced Culture Technology
• /
• v.11 no.2
• /
• pp.381-388
• /
• 2023

Small-scale environmental impact assessments have limitations in terms of survey duration and evaluation resources, which can hinder the assessment and analysis of the current situation. In this study, we propose the use of drone technology during the environmental impact assessment process to supplement these limitations in the current situation analysis. Drone photography can provide rapid and accurate high-resolution images, allowing for the collection of various information about the target area. This information can include different types of data such as terrain, vegetation, landscape, and real-time 3D spatial information, which can be collected and processed using GIS software to understand and analyze the environmental conditions. In this study, we confirmed that terrain and vegetation analysis and prediction of the target area using drone photography and GIS analysis software is possible, providing useful information for environmental impact assessments.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.99-104
• /
• 2004

Recently, the old surveying method for acquiring surveying-geo information results had a low economic efficiency and a low dependence of precision because it took much times and high costs. So, we acquired law data by execution of control surveying through Static positioning of DGPS(Ashtech). It is computed plainmetric(X, Y) positioning through postprocessing by Prism S/W. And we computed height(Z) through control surveying by ring-closed leveling surveying. After control surveying execution, we built DEM(Digital Elevation Model) using LDT S/W and accuracy 3D detail surveying by EDM(Electronic Distance Measurement) surveying. The purpose of this study was to yield automated digital mapping and the automated amount of materials using ahead data. The conclusions were as follows; First, we built the automated amount of materials system and got high efficiency about personnel, times and precision. Second, when, people precisely positioned on railroads of a high-speed railroad and used GPS surveying, the result was permitted. Finally, it was possible to draw automated profile and cross-section using the 3D terrain model build with the DEM technique.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.13-20
• /
• 2013

Currently, SEAMCAT has been widely used as a tool to evaluate the effects of interference among wireless communication systems. In the previous work, we have incorporated the ITU-R P.526 pathloss model to the existing SEAMCAT in order to support the capability of interference evaluation taking into account any specific terrain characteristics. Along with this, we have implemented a terrain display function based on the Google map. However, the two-dimensional Google map based display is not effective in helping users to figure out some terrain features including the elevation variation in a given region. In order to alleviate this difficulty, we have incorporated the three-dimensional terrain display using the API of the Google earth to the existing SEAMCAT and provided the capability of viewing the positions of the associated communication systems, the variation of the carrier intensity and interference intensity in location, shadow region indication, and line-of-sight analysis and presented an example of interference evaluation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.591-598
• /
• 2008

Recently, the government has improvement projects of dangerous road for the site that has very high accident rate due to bad geometric structures of the road. Although, route selecting of the road is a basic and important process, but the process of route selecting must consider the technical, safety and environment factor together. Also, the technology for the 3-dimensional terrain model can be used as an important factor in planning and designing for selecting alternative route projects. In the course of experimenting with the 3-dimensional topography generated by the combination of the digital map and drawing of route, the technology as been developed to offer the multi-dimensional access to the potential construction sites from the nearby main roads. This 3-dimensional digital elevation model has made it possible to make various terrain analysis base on GIS, which provides real-time virtual access to the designated construction sites for development planning and construction projects. Therefore, this study presents a reasonable plan for route selecting from some alternative routes through subjective evaluation and classify the methods linked basic design of road construction.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.130-134
• /
• 2007

본 연구는 지형참조항법(TRN; Terrain Referenced Navigation)에 근거하는 헬리콥터 항법 시스템을 위한 기본 알고리즘을 개발하기 위해 수행되었다. 현재 본 연구에 위성항법장치(GPS; Global Positioning System)로부터의 정보(X, Y, Z 좌표)는 비행체가 항로를 비행하는 중 매 92.8m의 수평거리로 환산하여 수신되는 것으로 가정하였다. 비행체는 3차원 직교 좌표 체계(Cartesian coordinate system)로 표현되는 수치지형모델 (DTM; Digital Terrain Model)상에서 시점(Origination)-종점(Destination) 기법에 의해 항로를 결정한다. 본 시스템은 우선 조종사에게 지형의 사전 인식을 위해 시점-종점 주변 3차원 지형도와 항로의 종단면도를 보여준다. 본 시스템은 직접적인 지상 충돌을 피하기 위해 지형 여유 층면(terrain clearance floor)의 개념을 도입, 기복 지형 표면에 일정 높이의 완충 공간을 설정한다. 만약 비행체가 항행 중 완충 공간에 접근하게 되면 본 시스템은 즉시 경고음과 메시지를 발한다(Matlab 메뉴를 사용하였음). 물론 헬리콥터의 이착륙 시에는 불필요한 경고를 발생시키지 않기 위해 완충 공간 조정은 가능하다. 수치지형모델은 (주)첨성대가 확보하고 있는 3초 간격의 DTM을 채택, 작성하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.97-102
• /
• 2007

Recently, coastal damage according to the natural disaster like storm-surge, overflowing of the sea has been massively increased. In case of earth fill at the seaside, there are a lot of weak areas of the natural disaster and it has also high possibility that a large disaster happens. Thus flood expectation map in the reclaimed land using 3D spatial information was produced in this study. The area around Myungji, Kangsugu, Busan which was made with the large scale earth fils at the seaside was designated as a study area. Observation of both costal datum and ground height using the tidal date and field surveying dates was conducted. Terrain model using the GIS program was produced and than 3D building model was produced using 3D MAX. It was shown that there are possibility more than 50% if over 4.5m storm-surge is happening, as a result of calculating the virtual flooded area on the produced cartographic map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.365-371
• /
• 2003

Digital high resolution cameras are widely available, and are increasingly use in digital close-range photogrammetry. And photogrammetry instruments are developing rapidly and the precision is improving continuously. The building of 3D terrains of high precision are possible and the calculation of the areas or the earthwork volumes have high precision due to the development of the techlique of the spatial information system using computer. Using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we try to find a effective method of acquiring basis data for 3D monitoring of high-accuracy in pixel degree through digital close-range photogrammetry with bundle adjustment for local terrain model generation and 3D embodiment of tumulus. In the study is about to efficient analysis of digital information data fer conservation of cultural properties.

• Spatial Information Research
• /
• v.18 no.3
• /
• pp.1-11
• /
• 2010

Recently, the construction of three dimensional spatial information of Dam reservoir area is very important part in Dam management work such as sediment survey, but it is difficult to acquire detailed terrain data because totalstation and single beam echo sounder are applied to terrain survey. This study presented method to construct detailed terrain data of Dam reservoir area using LiDAR and multi beam echo sounder. First, LiDAR survey was carried out in land zone and calibration process was applied by ground control point. And also the DEM of land zone was constructed by using algorithm, which eliminated building and vegetation class. As the result of validation of LiDAR DEM using GPS terrain survey, it was possible to construct three dimensional terrain data that was satisfied with the tolerance error of LiDAR, which was the standard error of LiDAR DEM showed as 0.108m. Also multi beam echo sounder was applied to the survey of water zone and it could construct spatial information that was satisfied with bathymetry surveying tolerance error of International Hydrographic Organization by validation with terrain survey data. And LiDAR and multi beam echo sounder data were integrated and it was possible to construct three dimensional spatial imagery information that can be applied to Dam management work such as the estimation of sediment amounts or the monitoring of terrain change by linking with high resolution orthophoto.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.369-373
• /
• 2006

A 3D modeling of urban area can be composed the terrain modeling that can express specific and shape of the terrain and the object modeling such as buildings, trees and facilities which are found in urban areas. Especially in a 3D modeling of building, it is very important to make a unit model by simplifying 3D structure and to take a texture mapping, which can help visualize surface information. In this study, the texture mapping technique, based on library for 3D urban modeling, was used for building modeling. This technique applies the texture map in the form of library which is constructed as building types, and then take mapping to the 3D building frame. For effectively apply, this technique, we classified buildings automatically using LiDAR data and made 3D frame using LiDAR and digital map. To express the realistic building texture, we made the texture library using real building photograph.