• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.226-241
• /
• 2020

The stability of underground mine cavity is closely related with pillar strength. The vulnerability of pillars can be judged and reinforced if the pillar strength is known. The pillar strength is affected by characteristics of discontinuities and shape of a pillar. The change of pillar strength due to a discontinuity passing through the center of a pillar, width-to-height ratio of a pillar and small joints existing within a pillar was analyzed using PFC 3D. The result showed that the pillar strength is influenced by dip angle of a discontinuity and it increases as width-to-height ratio of a pillar increases. The pillar strength decreases as the number of contained joints increases. The relationship between total trace length observable from the pillar surface and the pillar strength was regressed with exponential function. The correlation coefficient of the regression was high enough so that pillar strength can be predicted using total trace length if a joint set exists in a pillar. Lastly, the method to estimate the strength of a pillar that includes two joint sets was proposed if the joint dip angles are 60°, 30°. The method also need total trace lengths of two joint sets.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.113-119
• /
• 2014

The positioning accuracy of GNSS surveys deteriorates due to various error factor, and many users sometimes ignore Phase Center Variation (PCV) of antennas. IGS provides an ANTEX file which contains PCV correction information to correct for PCVs. But it is not directly applicable because PCV correction information is provided at 5-degree intervals in the azimuth and elevation directions for the case of receiver antennas, and at 1-degree intervals in the nadir angle for the case of satellite antennas. So, we devised new and optimal ways of interpolating PCV in any desired line of sight to the GNSS satellite. We used spherical harmonics fitting methods in terms of the azimuth and elevation angle for interpolation, and found an optimal degree and order. It is shown that the best accuracy was obtained from the 8 by 8 spherical harmonics. If one requires lower burden on computing resources, the order and degree less than 8 could produce resonable accuracy except for 1st and 5th order.

• 보존과학연구
• /
• s.36
• /
• pp.64-73
• /
• 2015

The temple and family or private owner have managed the storage space of movable cultural properties. Thus they lack the ability to manage professionally and systematically, movable cultural properties are in a poor environment and have been damaged by abundant dust and airborne fungi in the storage. In this study, we investigated microbes distribution in 10 storage or exhibition hall housing the movable cultural properties. As a results, concentration of collected microorganisms exhibited a large difference according to a storage and the D Relic Museum in Yeongam is the most contaminant storage, in which detected $2,000m^3$ or more. More than $166m^3$ of the fungi were detected in most storages of the other. We identified so many varieties of fungi such as Aspergillus sp., Penicillium sp., Alternaria sp. and Cladosporium sp. existing commonly in 10 storages including wood rot fungi such as Ceriporia lacerata, Ganoderma carnosum, Myrothecium gramineum and Bjerkandera sp.. This airborne fungi may damage cultural heritages. The Guideline on a concentration of airborne fungi should be estimated and management system to the preservation environment must be provided.

• Journal of Biomedical Engineering Research
• /
• v.32 no.3
• /
• pp.237-244
• /
• 2011

In this paper, a feature-based registration technique is proposed for pre-contrast and post-contrast lung CT images. It utilizes three dimensional(3-D) features with their descriptors and estimates feature correspondences by nearest neighborhood matching in the feature space. We design a transformation model between the input image pairs using a free form deformation(FFD) which is based on B-splines. Registration is achieved by minimizing an energy function incorporating the smoothness of FFD and the correspondence information through a non-linear gradient conjugate method. To deal with outliers in feature matching, our energy model integrates a robust estimator which discards outliers effectively by iteratively reducing a radius of confidence in the minimization process. Performance evaluation was carried out in terms of accuracy and efficiency using seven pairs of lung CT images of clinical practice. For a quantitative assessment, a radiologist specialized in thorax manually placed landmarks on each CT image pair. In comparative evaluation to a conventional feature-based registration method, our algorithm showed improved performances in both accuracy and efficiency.

• Journal of the Korea Society for Simulation
• /
• v.25 no.1
• /
• pp.53-61
• /
• 2016

This paper introduces 'EgresSIM', which is microscopic evacuation simulation software. EgresSIM developed in this paper is a three-dimensional (3D) pedestrian evacuation simulator based on the improved model advanced from the floor field model(FFM), a microscopic pedestrian model. This software can simulate large size buildings that consist of a number of floors, stairs, rooms, and exit doors. Moreover, this software can arrange several hundreds or thousands of pedestrians in indoor space and check their movements through the 3D viewer in real time, as well as produce detailed results about evacuation situations such as which paths are employed by individual pedestrians, how long does it takes to evacuate, and how many evacuees are gathered at each of the exit doors. Building data needed in the simulation are constructed as XML files according to pre-defined indoor data models and information of simulation results is also created as XML log files. A moving pattern of pedestrians can be represented in many ways by adjusting the sensitivity parameters of two walk models supported by EgresSIM. Thus, evacuation simulation can be done based on many assumptions of situations such as movement to the nearest exit door or blackout after outage.

• Journal of Marine Life Science
• /
• v.5 no.2
• /
• pp.64-71
• /
• 2020

Gloiopeltis tenax is one of the most economically useful species in China and Japan that has been applied to glue and food since ancient times. The material used in the experiment was a large quantity of basal crusts obtained from the culture of tetraspores that were released from the mature tetrasporophytes collected at Gyeokpori, Byeonsan-myeon, Buan-gun, Jeollabuk-do in Korea. The basal crusts were cut into quadrisect under a dissecting microscope so as to monitor the process of regeneration and growth. The cut crusts were cultured under varying conditions, where the photoperiod was 16:8 h L:D; the temperature range was 10, 15, 20, and 25℃; the irradiance range was 30 and 85 µmol photons m^-2s^-1. The quadrisect basal crusts grew to an oval shape, then formed a vertical axis of cylindrical shape. The maximum growth of basal crusts was 9.61±3.59 mm² under the condition of 15℃ temperature and 85 µmol photons m^-2s^-1 irradiance, after 12-weeks culture. The mean relative growth rate after 12-weeks culture showed the maximum rate of 5.15±0.80 %day^-1 at 15℃ and the minimum growth rate was 3.15±0.94 %day^-1 at 10℃, with a statistically significant difference (p < 0.05). In conclusion, it has shown the possibility that growth of basal crusts of G. tenax is one of the good farming method of potential alga.

• Tunnel and Underground Space
• /
• v.29 no.3
• /
• pp.197-213
• /
• 2019

We simulated the fault reactivation experiment conducted at 'Main Fault' intersecting the low permeability clay formations of Mont Terri Underground Research Laboratory in Switzerland using TOUGH-FLAC simulator. The fluid flow along a fault was modelled with solid elements and governed by Darcy's law with the cubic law in TOUGH2, whereas the mechanical behavior of a single fault was represented by creating interface elements between two separating rock blocks in FLAC3D. We formulate the hydro-mechanical coupling relation of hydraulic aperture to consider the elastic fracture opening and failure-induced dilation for reproducing the abrupt changes in injection flow rate and monitoring pressure at fracture opening pressure. A parametric study was conducted to examine the effects of in-situ stress condition and fault deformation and strength parameters and to find the optimal parameter set to reproduce the field observations. In the best matching simulation, the fracture opening pressure and variations of injection flow rate and monitoring pressure showed good agreement with field experiment results, which suggests the capability of the numerical model to reasonably capture the fracture opening and propagation process. The model overestimated the fault displacement in shear direction and the range of reactivated zone, which was attributed to the progressive shear failures along the fault at high injection pressure. In the field experiment results, however, fracture tensile opening seems the dominant mechanism affecting the hydraulic aperture increase.

• Journal of the Korea Computer Graphics Society
• /
• v.30 no.3
• /
• pp.71-79
• /
• 2024

This study organizes an immersive content production pipeline using Meta Quest Pro as an asymmetric virtual environment where mixed reality(MR) and virtual reality(VR) users participate and interact together. Based on this, we compare and analyze the differences in presence and experience provided by the user's experience environment. The proposed production process is to build an integrated development environment using Meta XR All-in-One SDK based on the Unity 3D engine. This includes a real space analysis method using the Room Model function for organic and accurate interaction between MR users in the real world and VR users based on virtual scenes at fixed coordinates. Based on this, this study produces immersive table tennis content where MR and VR users participate together. Finally, we conduct survey experiments to compare and analyze the effects of differences in platform and participation methods on presence and experience using the produced content. As a result, this study confirmed that all users can feel a satisfactory presence and experience within an experience environment where real and virtual correspond.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.23-31
• /
• 2004

This paper focuses on a boundary surface based ray casting. In general the boundary surface based ray casting is processed in two stages. The first stage finds boundary surfaces and stores them into buffers. The second stage calculates a distance from a viewpoint to the voxels of the interested area by projecting boundary surfaces on the view plane, and then starts to traverse a volume data space with the distance. Our approach differs from the general boundary surface based ray casting in processing the first stage of it. Contrast to the typical boundary surface based ray casting where all boundary surfaces of volume data are stored into buffers, they are projected on the planes aligned to the axis of volume data coordinates and these projected data are stored into 6 buffers. Such maneuver shortens time for ray casting, and reduces memory usage because it can be carried out independently from the amount of the volume data.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.398-412
• /
• 2005

There is an increasing interest in migration legacy systems to new hardware platforms and to new software development paradigms. The reason is that high maintenance costs and lack of documentation. In order to migrate or transform legacy system, various approaches such as screen scrapping, wrapping, semi-development, and re-development, tools, and methodologies are introduced until now. However, architecture or requirements level's transformation is not suggested because most of those approaches focus on code-level transformation or a few model-level transform. In this paper, we suggest a meta-model driven approach applying 3D space concept, which can be applied into architecture and requirement phase. Proposed integrated model drives seamless migration or co-evolution from code to architecture of reverse engineering and from architecture to code of forward engineering.