• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 추계학술발표대회 요약집
• /
• pp.95.1-95.1
• /
• 2003

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1287-1292
• /
• 2007

Recently, the frequency of unexpecting heavy rains has been increased due to abnormal climate and extreme rainfall. There was a limit to analyze 1D or 2D stream flow that was applied simple momentum equation and fixed energy conservation. Therefore, hydrodynamics flow analysis in rivers has been needed 3D numerical analysis for correct stream flow interpretation. In this study, CFD model on FLOW-3D was applied to stream flow analysis, which solves three dimenson RANS(Reynolds Averaged Navier-Stokes Equation) control equation to find out physical behavior and the effect of hydraulic structures. Numerical simulation accomplished those results was compared by using turbulence models such as ${\kappa}-{\varepsilon}$, RNG ${\kappa}-{\varepsilon}$ and LES. Those numerical analysis results have been illustrated by the turbulence energy effects, velocity of flow distributions, water level pressure distributions and eddy flows around the piers at Jangwall bridge in urbarn stream.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.68-75
• /
• 2009

In this study, aeroelastic response analyses have been conducted for a 3D wind turbine blade model. Advanced computational analysis system based on computational fluid dynamics(CFD) and computational structural dynamics(CSD) has been developed in order to investigate detailed dynamic responsed of wind turbine blade. Vibration analyses of rotating wind-turbine blade have been conducted using the general nonlinear finite element program, SAMCEF (Ver.6.3). Reynolds-averaged Navier-Stokes (RANS)equations with spalart-allmaras turbulence model are solved for unsteady flow problems of the rotating turbine blade model. A fully implicit time marching scheme based on the Newmark direct integration method is used for computing the coupled aeroelastic governing equations of the 3D turbine blade for fluid-structure interaction (FSI) problems. Detailed dynamic responses and instantaneous Mach contour on the blade surfaces considering flow-separation effects are presented to show the multi-physical phenomenon of the rotating wind-turbine blade model.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.60-60
• /
• 2021

Investigating Backward-Facing Step(BFS) flow is important in that it is a representative case for separation flows in various engineering flow systems. There have been a wide range of experimental, theoretical, and numerical studies to investigate the flow characteristics over BFS, such as flow separation, reattachment length and recirculation zone. However, most of such previous studies were concentrated only on the perpendicular step angle. In this study, several numerical investigations on the flow pattern over BFS with various step angles (10° ~ 90°) and expansion ratios (1.48, 2 and 3.27) under different Reynolds numbers (5000 ~ 64000) were carried out, mainly focused on the reattachment length. The numerical simulations were performed using an open source 3D CFD software, OpenFOAM, in which the velocity profiles and turbulence intensities are calculated by RANS (Reynolds Averaged Navier-Stokes equation) and 3D LES (Large Eddy Simulation) turbulence models. Overall, it shows a good agreement between simulations and the experimental data by Ruck and Makiola (1993). In comparison with the results obtained from RANS and 3D LES, it was shown that 3D LES model can capture much better and more details on the velocity profiles, turbulence intensities, and reattachment length behind the step for relatively low Reynolds number(Re < 11000) cases. However, the simulation results by both of RANS and 3D LES showed very good agreement with the experimental data for the high Reynolds number cases(Re > 11000). For Re > 11000, the reattachment length is no longer dependent on the Reynolds number, and it tends to be nearly constant for the step angles larger than 30°.) Based on the calibrated and validated numerical simulations, several additional numerical simulations were also conducted with higher Reynolds number and another expansion ratio which were not considered in the experiments by Ruck and Makiola (1993).

• 한국유체기계학회 논문집
• /
• 제9권6호
• /
• pp.29-34
• /
• 2006

Propeller type pump has been widely used for pumping water in agricultural and manufacturing industry. Since a propeller type pump contains a screw impeller inside a circular casing, the numerical analysis becomes complex. However, the accurate prediction of viscous flow is essential for computing hydrodynamic performances. To analysis the flow and the performance of the propeller type pump, the present work has solved 3D incompressible RANS equations on the multiblocked grid. From the present calculation, small amount of flow separation was shown near hub and the flow was recovered to nearly uniform inflow after one diameter downstream. Torque and thrust coefficient were computed and compared with experiments.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.55-62
• /
• 2011

Shape optimization of a Printed circuit heat exchanger (PCHE) has been performed by using three-dimensional Reynolds-Averaged Navier-Stokes (3-D RANS) analysis and surrogate modeling techniques. The objective function is defined as a linear combination of effectiveness of the PCHE term and pressure drop in the cold channels of the PCHE. The cold channel angle and the ellipse aspect ratio of the cold channel are used as design variables for the optimization. Design points are selected through Latin-hypercube sampling. The optimal point is determined through surrogate-based optimization method which uses 3-D RANS analyses at design points. The results of three types of surrogate model are compared each other. The results of the optimizations indicate improved performance in friction loss but low performance in effectiveness than the reference shape.

• International Journal of Fluid Machinery and Systems
• /
• 제10권3호
• /
• pp.227-239
• /
• 2017

The accuracy of turbulence models for the Reynolds-Averaged Navier-Stokes (RANS) equations in rough-wall flows is evaluated using data from large-eddy simulations (LES) of boundary layers with favourable and adverse pressure gradients. Some features of the flow (such as flow reversal in the roughness sublayer) cannot be captured accurately by any model, due to the fundamental model formulation. In mild pressure gradients most RANS models are sufficiently accurate for engineering applications, but if strong favourable or adverse pressure gradients are applied (especially those leading to separation) the model performance rapidly degrades.

• 한국수자원학회논문집
• /
• 제55권2호
• /
• pp.147-157
• /
• 2022

후향단차 수공구조물의 모서리에서는 흐름분리가 발생하며 이로 인해 형성되는 전단층과 재순환 흐름 영역에서의 흐름은 복잡한 난류가 지배적이다. 물리적으로 안정하면서 성능이 보장되는 구조물 설계를 위해서는 이러한 난류 흐름의 거동을 정확하게 예측하고 분석하는 것이 중요하다. 이 연구에서는 공학적으로 널리 이용되고 있는 대표적인 난류 모형인 k-ω SST 모형과 RNG k-ε 모형을 이용한 3차원 RANS 계산을 통해서 개수로에 설치된 후향단차를 통과하는 난류 흐름을 레이놀즈 수 23,400과 후르드 수 0.22의 조건에서 수치모의하고, 해석 결과를 기존 실험자료와 비교 분석하여 수치해석의 성능을 평가하고자 한다. 두 가지 난류 모형을 이용하여 구한 평균유속 분포를 보면 모두 경계층에서 관측된 실험값을 양호하게 잘 재현하는 것으로 나타났다. 재순환 영역 상부에서 계산된 평균유속을 보면 RNG k-ε 모형이 k-ω SST 모형보다 중앙부에서의 유속을 약 5% 정도 크게 계산하는 것으로 나타났다. 난류 통계량 관점에서 보면 두 난류 모형 모두 단차 모서리 직하류에서 흐름 분리로 인해 발생하는 레이놀즈 전단응력을 현저히 과소산정하는 한편, 재부착점 하류에서는 실험값을 상대적으로 양호하게 재현하는 것으로 나타났다. RNG k-ε 모형은 수로 바닥 부근 경계층에서의 전단응력 분포를 k-ω SST 모형보다는 우수한 정확도로 실험값을 계산하는 반면에 접근수로 경계층에서 그리고 단차 하류부에서는 경계층 상부에서 전단응력을 과대 산정하는 것으로 나타났다.

• 한국유체기계학회 논문집
• /
• 제14권3호
• /
• pp.39-44
• /
• 2011

In this study, performance analyses have been conducted for a 5MW class wind turbine blade model. Advanced computational analysis system based on computational fluid dynamics(CFD) and computational structural dynamics(CSD) has been developed in order to investigate detailed dynamic responsed of wind turbine blade. Reynolds-averaged Navier-Stokes (RANS) equations with K-${\epsilon}$ turbulence model are solved for unsteady flow problems of the rotating turbine blade model. A fully implicit time marching scheme based on the Newmark direct integration method is used for computing the coupled aeroelastic governing equations of the 3D turbine blade for fluid-structure interaction (FSI) problems. Predicted aerodynamic performance considering structural deformation effect of the blade show different results compared to the case of rigid blade model.

• 대한조선학회논문집
• /
• 제39권3호
• /
• pp.28-40
• /
• 2002

지면효과를 받는 2차원 날개 주위의 난류유동을 비압축성 RANS(Reynolds Averaged Navier Stokes) 방정식과 유한차분법(Finite Difference Method)을 이용하여 해석하였다. 높은 레이놀즈수에 효과적인 Baldwin-Lomax 난류모델을 사용하였다. 본 연구의 목적은 지면효과를 받는 2차원 날개단면에서의 각기 다른 두 바닥 경계조건(이동지면, 고정지면)에 따른 유동의 특성을 파악하는 것이다. Clark-Y(t/C 11.7%)날개단면의 계산 결과와 발표된 계산결과 및 실험 값과의 비교를 통해 본 수치해석 프로그램의 정확성을 검증하였다. NACA4412 날개단면에 대해 지면과의 높이변화에 대해서 두 바닥 경계조건에 대해서 유동해석을 수행하였다 계산결과에 의하면 이동지면과 고정지면에 대해서 양력과 모멘트는 별 차이가 없으나 항력은 고정지면의 경우가 이동지면의 경우보다 다소 작았다. 따라서 풍동시험에서 고정지면의 결과는 이동지면에 비해 상대적으로 저항이 낮게 평가될 가능성이 있다고 본다.