• 신재생에너지
• /
• 제2권2호
• /
• pp.118-125
• /
• 2006

The target of this work was the process development of demonstration plant to produce the high quality alternative fuel oil by the pyrolysis of mixed plastic waste. In the first step of research, the bench-scale units of 70 t/y and the pilot plant of 360 t/y had been developed. Main research contents in this step were the process performance test of pilot plant of 360 ton/year and the development of demonstration plant of 3,000 t/y, which was constructed at Korea R & D Company in Kimjae City. The process performance of pilot plant of 360 t/y showed about 80% yield of liquid product, which was obtained by both light gas oil(LGO) and heavy gas oil(HGO), The boiling point range distribution of LO product that was mainly consisting of olefin components in PONA group appeared at between that of commercial gasoline and kerosene. On the other hand, HO product was mainly paraffin and olefin components and also appeared at upper temperature distribution range than commercial diesel. Gas product showed a high fraction of $C_3\;and\;C_4$ product like LPG composition, but also a high fraction of $CO_2$ and CO by probably a little leak of process.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.155-160
• /
• 2018

The materials used for 3D printing are mainly plastic and metal. These materials are usually used in the powdered form. In order to improve the surface roughness of a manufactured product, these powders should consist of small uniform spherical particles. However, the powdered forms are sold at a considerably higher price than bulk or wired materials. When a wire-type material is used instead of a powder, we can supply a relatively large amount of the material at one time as well as reduce the cost. Moreover, the use of this form of the material will increase the process efficiency. This paper deals with the technology required to feed a wire material in front of the tool movement and discusses the examples used for the verification.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.134-139
• /
• 2015

PolyJet technology is an additive manufacturing (AM) technology commonly used for modeling, prototyping, and production applications. It is one of the techniques used for 3D printing. The PolyJet technique is a process that joins materials to fabricate a product from 3D CAD data in a layer-by-layer manner. The orientation of a layer can affect the mechanical properties of the product manufactured by the PolyJet technique because of its anisotropy. In this paper, tensile and shearing tests of specimens were developed with the PolyJet technique in order to study the mechanical properties according to the orientation of a layer. The mechanical properties of the specimens were determined on the basis of true stress-strain curves from tensile and shearing tests. In addition, the tensile and shearing tests were simulated under the same conditions as those of experiment, and the experiment and simulated results were compared. Through this study, the fracture criteria could be established.

• 정보처리학회논문지D
• /
• 제12D권3호
• /
• pp.395-408
• /
• 2005

유비쿼터스 컴퓨팅은 매우 광범위한 기술 분야에 적용될 수 있고 완벽한 사용자 요구를 필요로 하며, 많은 시나리오와 기술들을 포함하고 있으므로 이러한 요구를 충족시켜주는 새로운 소프트웨어 개발 툴과 방법론이 필수적이다. 이를 위한 새로운 기술로써 소프트웨어 프로덕트 라인은 공통의 유사한 기능을 가지고 있는 소프트웨어 제품 혹은 소프트웨어 시스템 집합으로 특정 영역의 시장과 용도의 요구사항에 따라 재사용 가능한 아키텍처 및 컴포넌트를 구성함으로써 생산성과 품질을 향상시킬 수 있다. 특히, 시스템을 분할하고 구조화하여 시스템의 성능과 효율성을 향상시킬 수 있는 소프트웨어 아키텍처 개념이 중요시되면서 아키텍처의 개발과 평가에 대한 체계적인 연구가 필요하다. 본 논문에서는 CBD(Component Based Development)를 기반한 소프트웨어 프로덕트 라인(PLD : Product Line based Development)을 도입하여 모바일 비즈니스 도메인에 적합한 모바일 응용 시스템 아키텍처(MASA. Mobile Application System Architecture)를 제시한다.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.214-222
• /
• 2012

The shipbuilding process is changing due to changes in the development environment and technological requirements for military ships. This would also hold true for a submarine, because its shipbuilding process includes complicated design and construction conditions. System improvement efforts for the design and construction of military ships have continued with the goal of overcoming these conditions. At present, the Korea Navy is developing a 3,000 ton-class Korean type submarine, and its design is progressing by the introduction of a full 3D-ship CAD system. Although the 3D modeling system was introduced for effective design realization through the introduction of collaborative design and active utilization of M&S (modeling and simulation), the introduction effects are not yet generally obvious, according to the characteristics of ship design. The present paper discusses the collaborative environment for developing a submarine to enhance this. This paper proposes the architecture and data structure of a system for realizing collaborative design and discusses a case system developed on the basis of this.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.305-307
• /
• 2021

본 논문에서는 ICT(Information Communication Technology) 기술을 이용하여 스마트팩토리 기반 CPPS(Cyber Pysical Production System)를 활용한 Digital-Twin 플랫폼 개발과 관련된 연구를 제안한다. 본 연구를 통해 개발된 플랫폼은 선행 제조 공정 계획 단계부터 BOP(Bill of Process) 관리 기능을 포함하여 P3R(Product, Process, Plant, Resource)을 연계한 3D Model 시뮬레이션 기능을 수행한다. 또한 생산 공정, 설비, 레이아웃, 생산량 예측이 가능한 Digital Twin 플랫폼을 제안한다. 본 논문을 통해 제안된 플랫폼은 초기 계획 설계 단계에서부터 제조, 생산, 운영 및 유지보수 단계까지의 전체 스마트팩토리 제조 공정을 관리할 수 있는 특징을 제안하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.108-108
• /
• 2017

In this study, biocomposite filaments with agricultural by-products can be used in extrusion-based 3D (Three-dimensional) printing. Extrusion-based 3D printing stands as a promising technique owing to its versatility. We hypothesized that bio-filament composite consisted of something derived from agricultural by-products could be used as 3D printing materials that could overcome the drawbacks of PCL (poly-caprolactone). Bio-filament mixed with PCL and agricultural by-products was defined as r-PCL in this study. In order to find it out the optimal mixing ratio of filaments, we had investigated PCL, r-PCL 10%, r-PCL 20%, r-PCL 50% separately. The morphological and chemical characteristics of the filaments were analyzed by FE-SEM (Field emission scanning electron microscope) and EDX (Energy-dispersive X-Ray spectroscopy), and the mechanical properties were evaluated by stress-strain curve, water contact angle, and cytotoxicity analysis. Results of this study have been shown as a promising way to produce eco-friendly bio-filaments composite for FDM (Fused deposition modeling) method based 3D printing technology. Thus, we could establish biomimetic scaffolds based on bio-printer filaments mixed with agricultural by-product.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1997년도 한국감성과학회 연차학술대회논문집
• /
• pp.33-36
• /
• 1997

This paper describes an image design process for product development based on human sensibility ergonomics.. The human sensibility about product image can be measured through some statistical methods and translated into product design factors by some mathematical inference logics. This results also can be presented by 3D computer graphic tools, In order to integrate the above processess, a image design process on human sensibility database. Human sensibility database is constructed with the relational ddta of some adjective words and design factors, The next step is to extract the design information from the human sensibility dataabase by fuzzy inference algouithm. This information is used for the input data for the graphic presentation. The final product can be modified according to the customer's requirement.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.346-349
• /
• 2004

In the previous experimental study about extru-bending of angle product, the bending of extruded angle products with the '${\wedge}$' section and 'ㄱ' section can be abtained by the hot metal extru-bending machine with the two punches moving in the different velocity. The bending curvature can be controlled by the different velocity of billets through the two-hole container. This paper describes simulation of extru-bending process by the difference of punch velocities. The result of the forming simulation by $DEFORM^{TM}-3D$ shows that the bending phenomenon at the die exit during extrusion can be abtained by the two punches moving in the different velocity. And it is possible to design extrusion dies and to control the curvature of product through the simulation of extru-bending process by analysis

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.516-517
• /
• 2019

3D 프린팅 기술은 가상 혹은 평면에 설계된 디자인을 입체적으로 출력이 가능하다는 점에서 핵심적 기술로 주목받아 오고 있다. 본 연구는 슈즈에 관한 개념을 1차적으로 정리하여 일반적 제조과정을 분석하고, 3D 프린팅이 적용된 슈즈제작과정을 제시하고, 생산되는 슈즈 사례들을 브랜드별(스포츠 브랜드, 디자이너 브랜드)로 구분하여 맞춤형 제작 특성을 연구하였다. 사례 분석을 통해 3D 프린팅 슈즈의 4가지 디자인 제작 특성을 도출했다. 따라서 본 연구는 향후 3D 프린팅을 활용한 슈즈디자인 영역에서 보다 심화된 창조적 발상의 근거를 제시할 것으로 사료된다.