• 한국균학회소식:학술대회논문집
• /
• 2014.05a
• /
• pp.19-19
• /
• 2014

This study included the analysis of mushroom data collected from Mt. Chiak in Gangwon-do using various methods. Former studies of Korean mushrooms are limited by regional characters and there is less species diversity among the regions. This study tried to find a way for the forecast of mushroom distribution and appearance by indexes of species diversity. The indexes used in this study include the number of fungi (N), the number of species (S), similarity index (C), richness index (R1, R2), variety index (V1, V2), evenness index (E1, E2, E3, E4, E5), and dominance index (D1) to analyze variety of species diversity. Analyses of data of fungi using a multistage cluster sampling indicate that the average value of C for years was higher than the average value of C for areas. The mushrooms consisted of 208 species in 686 individuals in limited fungal collection from 2002 to 2003. One hundred thirty nine species in 393 individuals were collected in 2002, and 122 species 293 individuals were collected in 2003. The individuals collected in 2003 were smaller than 2002's individuals. Similarity, richness, and variety indexes' values of 2003 were reduced than 2002's values but dominance index of 2003 was increased than 2002's value. Generally the species diversity of the environment to evaluate the index of similarity, richness, and variety was a higher index; dominance index was lower than that of the surrounding environment, suggesting a good diversity. As a result, the occurrence of mushrooms in the surrounding environment and the various factors seem fell in 2002 compared to 2003. The majority genus of the limited fungal collection was Mycena genus in 63 individuals; the majority species was Laccaria laccata in 34 individuals. Ninety three species in 106 individuals were collected by the extended collection and the majority genus of the extended collection was Amanita genus in 17 individuals; the majority species was Amanita citrina (Schaeff.) Pers. which was found in 5 individuals. This demonstrates that periodical similarity's value was 0.159 is higher than special similarity's 0.119. This indicates that the probability of the appearance of same mushrooms in the same area in following year is higher than the probability of the appearance of same mushrooms in the surrounding area in same year. The value of coefficient of variation (CV), in which the amount of change is much or less by N is higher than the CV value by S. CV value of dominance index(D) was the highest r point among other indexes, and evenness index (E) was the lowest point among other indexes. The correlation matrix with 66 combinations between the indexes, the combinations with correlations was 46 combinations. These results revealed that indexes of R1, V2, and E1 were proper to represent species diversity of fungi based on the correlation matrix and the theory of statistical independence which means there is no or less mutual association. This research would contribute to the study about variable living creature by measuring method and in the future this would be used to figure out regulation about fungi with their correlation, values in ecosystem, develop improving new models about agricultural fungi species and numbers by investigating agricultural variable species.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.172-176
• /
• 2010

Purpose: The patients' moves occurred at PET/CT scan will cause the decline of correctness in results by resulting in inconsistency of Attenuation Correction (AC) and effecting on quantitative evaluation. This study has evaluated the utility of reconstruction method using AC position changing method when having inconsistency of AC depending on the position change of emission scan after transmission scan in obtaining PET/CT 3D image. Materials and Methods: We created 1 mL syringe injection space up to ${\pm}2$, 6, 10 cm toward x and y axis based on central point of polystyrene ($20{\times}20110$ cm) into GE Discovery STE16 equipment. After projection of syringe with $^{18}F$-FDG 5 kBq/mL, made an emission by changing the position and obtained the image by using AC depending on the position change. Reconstruction method is an iteration reconstruction method and is applied two times of iteration and 20 of subset, and for every emission data, decay correction depending on time pass is applied. Also, after setting ROI to the position of syringe, compared %Difference (%D) at each position to radioactivity concentrations (kBq/mL) and central point. Results: Radioactivity concentrations of central point of emission scan is 2.30 kBq/mL and is indicated as 1.95, 1.82 and 1.75 kBq/mL, relatively for +x axis, as 2.07, 1.75 and 1.65 kBq/mL for -x axis, as 2.07, 1.87 and 1.90 kBq/mL for +y axis and as 2.17, 1.85 and 1.67 kBq/mL for -y axis. Also, %D is yield as 15, 20, 23% for +x axis, as 9, 23, 28% for -x axis, as 12, 21, 20% for +y axis and as 8, 22, 29% for -y axis. When using AC position changing method, it is indicated as 2.00, 1.95 and 1.80 kBq/mL, relatively for +x axis, as 2.25, 2.15 and 1.90 kBq/mL for -x axis, as 2.07, 1.90 and 1.90 kBq/mL for +y axis, and as 2.10, 2.02, and 1.72 kBq/mL for -y axis. Also, %D is yield as 13, 15, 21% for +x axis, as 2, 6, 17% for -x axis, as 9, 17, 17% for +y axis, and as 8, 12, 25% for -y axis. Conclusion: When in inconsistency of AC, radioactivity concentrations for using AC position changing method increased average of 0.14, 0.03 kBq/mL at x, y axis and %D was improved 6.1, 4.2%. Also, it is indicated that the more far from the central point and the further position from the central point under the features that spatial resolution is lowered, the higher in lowering of radioactivity concentrations. However, since in actual clinic, attenuation degree increases more, it is considered that when in inconsistency, such tolerance will be increased. Therefore, at the lesion of the part where AC is not inconsistent, the tolerance of radioactivity concentrations will be reduced by applying AC position changing method.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.81-86
• /
• 1996

The physical properties of epoxy molding compound (EMC) according to the change of softening point of epoxy resin have been investigated in order to study the relationship between the properties of o-cresol novolac epoxy resin, which is main component of EMC for semiconductor encapsulation, and EMC. The softening points of used epoxy resin are 65.1 $^{\circ}C$, 72.2 $^{\circ}C$, and 83.0 $^{\circ}C$, respectively. The flexural strength and flexural modulus as mechanical properties were measured, and thermal expansion coefficient, thermal conductivity and glass transition temperature (Tg) as thermal properties, and spiral flow as moldability have been investigated to see the change of physical properties of EMC. The flexural modulus, thermal expansion coefficients in the glass state (${\alpha}_1$), and thermal conductivity of EMC were found to be keep constant value irrespective of the change of softening point, but Tg increased with softening point of epoxy resin, and the spiral flow decreased with that. It can be considered that these phenomena are due to the increase of crosslinking density of EMC according to the increase of softening point. The transition points were found out in the thermal expansion coefficient data in the rubbery state (${\alpha}_2$) and the flexural strength data. These can show the decrease of filler dispersion according to increase of epoxy resin viscosity.

• International Journal of Korean Welding Society
• /
• v.4 no.1
• /
• pp.30-37
• /
• 2004

There have been continuous efforts on automating welding processes. This automation process could be said to fall into two categories, weld seam tracking and weld quality evaluation. Recently, the attempts to achieve these two functions simultaneously are on the increase. For the study presented in this paper, a vision sensor is made, a vision system is constructed and using this, the 3 dimensional geometry of the bead is measured on-line. For the application as in welding, which is the characteristic of nonlinear process, a fuzzy controller is designed. And with this, an adaptive control system is proposed which acquires the bead height and the coordinates of the point on the bead along the horizontal fillet joint, performs seam tracking with those data, and also at the same time, controls the bead geometry to a uniform shape. A communication system, which enables the communication with the industrial robot, is designed to control the bead geometry and to track the weld seam. Experiments are made with varied offset angles from the pre-taught weld path, and they showed the adaptive system works favorable results.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.476-479
• /
• 2006

The purpose of this study is to evaluate and analyse the characteristics and images of interior environment design in the living rooms, bed rooms and kitchen of the apartment, using the e-model houses of the apartments that will be constructed by 10 construction companies and be occupied after 2006. The 29 defined terms were used in this study to describe the interior image trend. They were systematized by a 5-point scale for the SD evaluation, and were used as a tool to analyse the images. The images were evaluated by methods, such as monitoring the image photos showing the individual rooms in their e-model houses and making their slide film, and reediting them to understand interior atmospheres completely. The image evaluation was performed by the group of 2nd and 3rd year students in the Housing & Interior Design of D University on December 9, 2005, and the data were analysed using SPSS Statistical Program 12.0 for Windows.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.121-126
• /
• 2015

In this research, a tool was developed for the rapid performance of three-dimensional finite element analysis (3D FEA) of a machine tool spindle system made of a shaft and bearings. It runs the FEA with data, such as the bearing stiffness and the coordinates of the points, to define the section of the shaft, bearing positions, and cutting point. developed for the spindle system and then implemented with the tool using an object-oriented programing technique that allows the use of the objects of the CAD system used in this research. Graphic user interfaces were designed for a user to interact with the tool. It provides rapid evaluation of the design of a spindle system, and therefore, it would be helpful to identify a near optimal design of a spindle system based on, say, static stiffness with design changes and, consequently, FEA.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.50-56
• /
• 2004

The directional ability of an automobile has an influence on driver directly, and hence it must be given most priority. Alignment factors of automobile such as the camber, caster and toe directly affect the directional ability of a vehicle. The above mentioned factors are determined by the pose of interlinks in the assembly of an automobile front chassis module. Measuring the position of center point of ball joints in the front lower arm is very difficult. A method to determine this position is suggested in this paper. Pose estimation for front chassis module and dimensional evaluation to find the rotational characteristics of front lower arm were developed based on fundamental geometric techniques. To interpret the inspection data obtained for front chassis module, 3-D best fit method is needed. The best fit method determines the relationship between the nominal design coordinate system and the corresponding feature coordinate system. The least squares method based on singular value decomposition is used in this paper.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.430-433
• /
• 1997

We present the preliminary algorithms for automatic sleep scoring. According to the Rechtschaffen & Kales[3]'s critera, we developed six events detectors and eight parameters which contain the background information of signals, such as EEG, EMG, EOG. With the calculated parameters, we scored each epoch by IF-THEN rules, ANFIS for REM preiods, and finally Neural Network for unobvious epochs. The typical point of this algorithm is that the epoch which had good data sets were calculated in the first stage, and unobvious epochs were postponed until the final stage. After staging the good epochs, we classified unobvious epochs by the dominant stage of previous and posterior epochs.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.378-383
• /
• 2005

The performances of side channel type regenerative blowers were evaluated by the blower performance test, 1-D performance prediction and CFD. The performance prediction method was modified using the results of the performance test and CFD and applied to the design of the new regenerative blowers. The major geometric parameters such as channel height, channel area and expansion angle were decided from the performance prediction method for the improved models and the predicted results were compared with CFD and experimental data. Both of the modified models showed improved efficiency at the operating condition. Especially, model3 could be possible to reduce operating rotating speed, that is benefit to noise performance, because of the high head performance at the design point. The CFD results showed that the performance of the regenerative blower was influenced by the secondary circulatory flow in the channel.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.964-969
• /
• 2008

The recently those of various gatherings or events are gradually increasing not only at the general public performance hall but also at the outdoor performance hall. However, since the most of the domestic outdoor performance halls are being designed and executed without the proper consideration and care for Acoustic Characteristic thereat, a satisfying acoustic management are not established due to above reason. From this point of view, this study presents the basic data that will increase the sound performance in designing of the outdoor performance hall, by conducting the comparative analysis on the architectural sound characteristics through the field survey on to the 3 outdoor performance halls that have different characteristics, in order to present the appropriate standards.