• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.570-577
• /
• 2005

In this study a complete 3D surface reconstruction method is proposed based on the concept that the vertices of surface model can be completely matched to the unstructured point cloud. In order to generate the initial mesh model from the point cloud, the mesh subdivision of bounding box and shrink-wrapping algorithm are introduced. The control mesh model for well representing the topology of point cloud is derived from the initial mesh model by using the mesh simplification technique based on the original QEM algorithm, and the parametric surface model for approximately representing the geometry of point cloud is derived by applying the local subdivision surface fitting scheme on the control mesh model. And, to reconstruct the complete matching surface model, the insertion of isolated points on the parametric surface model and the mesh optimization are carried out Especially, the fast 3D surface reconstruction is realized by introducing the voxel-based nearest-point search algorithm, and the simulation results reveal the availability of the proposed surface reconstruction method.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.157-166
• /
• 2022

철근 콘크리트 구조 건설현장에서 육안 검사 방식으로 수행되는 현재 단계의 구조감리는 그 필요성에 비하여 매우 노동 집약적이기에 현실적으로 현장의 모든 상황을 파악하기에 제한적이며, 검사자의 주관성도 배제될 수 없다. 따라서 본 연구는 철근을 대상으로 한 구조감리의 효율성 개선을 위해 360° 카메라를 통해 수집한 RGB 및 Depth 데이터 기반 3D model을 이용하여 배근 간격을 도출하고 실측값과의 비교를 통해 정확도를 검증하였다. 소규모 현장(약 265 m²)의 12개 지점에 대해 계측을 수행하였으며, 지점당 스캔시간은 약 20초, 이동 및 설치시간을 포함한 총 계측 시간은 약 15분이 소요되었다. 계측된 데이터는 SLAM 알고리즘을 통하여 RGB-based 3D model과 3D point cloud model을 생성하였으며, 각각의 모델에서의 계측값을 실측값과 비교하여 정확도 검증을 진행하였다. RGB-based 3D model과 3D point cloud model은 각각 10mm, 0.1mm의 최소분해능을 갖으며, 각 모델로부터 계측된 철근의 배근 간격 은 의 오차는 최대 28.4%, 최소 3.1% (RGB-based 3D model) 최대 10.8%, 최소 0.3% (3D point cloud model)로 확인되었다. 본 연구를 토대로 추후 자동화 기반의 원격구조 감리 기술개발을 통하여 현장적용 및 분석의 효율성을 증대시키고자 한다.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.330-337
• /
• 2022

Research on object detection algorithms using 2D data has already progressed to the level of commercialization and is being applied to various manufacturing industries. Object detection technology using 2D data has an effective advantage, there are technical limitations to accurate data generation and analysis. Since 2D data is two-axis data without a sense of depth, ambiguity arises when approached from a practical point of view. Advanced countries such as the United States are leading 3D data collection and research using 3D laser scanners. Existing processing and detection algorithms such as ICP and RANSAC show high accuracy, but are used as a processing speed problem in the processing of large-scale point cloud data. In this study, PointNet a representative technique for detecting objects using widely used 3D point cloud data is analyzed and described. And RandLA-Net, which overcomes the limitations of PointNet's performance and object prediction accuracy, is described a review of detection technology using point cloud data was conducted.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2020년도 하계학술대회
• /
• pp.576-578
• /
• 2020

최근 사용자에게 더욱 몰입감 있는 콘텐츠를 제공하기 위한 기술에 대한 관심이 증가하고 있으며 기존의 2D 콘텐츠와는 다른 새로운 방식인 3D 콘텐츠에 대한 연구가 활발히 진행되고 있으며 그 중 가장 대표적인 것이 Point Cloud 영상이라고 할 수 있다. Point Cloud의 경우 수많은 3차원 좌표를 가진 점들로 구성되어 있으며 각 점들마다 Attribute 값을 이용하여 색상 등의 표현이 가능한 구조로 이루어져 있다. 이러한 특성 때문에 Point Cloud 데이터는 방대한 용량을 가지고 있으며 기존의 2D 방식과 데이터 구조가 상이하기 때문에 새로운 압축 표준이 요구되었다. 이에 미디어 표준화 단체인 MPEG(Moving Picture Experts Group)에서는 MPEG-I(Immersive) 차세대 프로젝트 그룹을 이용하여 이러한 움직임에 대응하고 있다. MPEG-I의 part 5(Video-based Point Cloud Compression, V-PCC)에서는 객체를 대상으로 하여 기존의 비디오 코덱을 활용한 Point Cloud 압축 표준화를 진행중이다. V-PCC 데이터의 경우 기존의 2D 영상 데이터와 같이 전송을 통해 소비될 가능성이 아주 높기 때문에 이에 대한 고려가 필요하다. 현재 MPEG에서 표준화를 완료한 MMT(MPEG Media Transport)라는 전송 표준이 존재하기 때문에 이 기술을 활용 가능할 것으로 보인다. 따라서 본 논문에서는 Point Cloud 데이터를 압축한 V-PCC 데이터를 전송 표준 방식인 MMT를 이용하여 전송하는 방안에 대하여 제안한다.

• 한국멀티미디어학회논문지
• /
• 제23권2호
• /
• pp.166-173
• /
• 2020

Multi-view images, which are widely used for providing free-viewpoint services, can enhance the quality of synthetic views when the number of views increases. However, there needs an efficient representation method because of the tremendous amount of data. In this paper, we propose a method for generating point cloud data for the efficient representation of multi-view color and depth images. The proposed method conducts sequential reconstruction of point clouds at each viewpoint as a method of deleting duplicate data. A 3D point of a point cloud is projected to a frame to be reconstructed, and the color and depth of the 3D point is compared with the pixel where it is projected. When the 3D point and the pixel are similar enough, then the pixel is not used for generating a 3D point. In this way, we can reduce the number of reconstructed 3D points. Experimental results show that the propose method generates a point cloud which can generate multi-view images while minimizing the number of 3D points.

• Journal of Information Processing Systems
• /
• 제13권3호
• /
• pp.491-499
• /
• 2017

In this study, we proposed a new approach to segment ground and nonground points gained from a 3D laser range sensor. The primary aim of this research was to provide a fast and effective method for ground segmentation. In each frame, we divide the point cloud into small groups. All threshold points and start-ground points in each group are then analyzed. To determine threshold points we depend on three features: gradient, lost threshold points, and abnormalities in the distance between the sensor and a particular threshold point. After a threshold point is determined, a start-ground point is then identified by considering the height difference between two consecutive points. All points from a start-ground point to the next threshold point are ground points. Other points are nonground. This process is then repeated until all points are labelled.

• 방송공학회논문지
• /
• 제21권1호
• /
• pp.3-10
• /
• 2016

본 논문은 실내공간의 다시점 정지 영상을 서로 다른 방식으로 획득하고, 이 데이터로부터 해당 3차원 공간에 대한 기하학적인 형상정보를 담은 두 종류의 복원 결과를 비교분석 한다. 공간 내 한 평면 복원을 목표로, 첫 번째 데이터 군 확보에는 정규격자경로를 따라 정지 영상을 얻는 수동형 영상 획득 방식을 활용하였다. 두 번째 데이터 군 확보에는 한 평면의 제한된 각도 내 3차원 정보를 얻는 레이저 스캐너의 스캐닝 방식을 정지 영상 획득 방식에 응용하였다. SIFT알고리즘을 이용해 획득된 정지 영상 데이터 간의 특징점을 검출하였고 이를 기반으로 3차원 포인트 클라우드 데이터를 생성하였다. 복원된 3차원 공간정보는 생성된 포인트 클라우드의 이미지와 개수 및 평균 밀집도, 수행 시간을 통해 표현했으며 보다 정확한 실내공간의 3차원 복원에는 카메라로 획득하는 정지 영상 데이터만이 아닌 추가적인 센서를 사용한 데이터의 확보가 필요하다는 점을 확인하였다.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.3-12
• /
• 2020

Nowadays, as-is BIM generation has been popularly adopted in the architecture, engineering, construction and facility management (AEC/FM) industries. In order to generate a 3D as-is BIM of a structural component, current methods require a registration process that merges different sets of point cloud data obtained from multiple locations, which is time-consuming and registration error-prone. To tackle this limitation, this study proposes a registration-free 3D point cloud data acquisition technique for as-is BIM generation. In this study, small-size mirrors that rotate in both horizontal and vertical direction are used to enable the registration-free data acquisition technique. First, a geometric model that defines the relationship among the mirrors, the laser scanner and the target component is developed. Second, determinations of optimal laser scanner location and mirror location are performed based on the developed geometrical model. To validate the proposed registration-free as-is BIM generation technique, simulation tests are conducted on key construction components including a PC slab and a structural wall. The result demonstrates that the registration-free point cloud data acquisition technique can be applicable in various construction elements including PC elements and structural components for as-is BIM generation.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.680-681
• /
• 2015

This study develops an algorithm that automatically performs reverse engineering on three-dimensional (3D) sweeping shapes using a user's pre-defined feature templates and 3D point cloud data (PCD) of sweeping shapes. Existing methods extract 3D sweeping shapes by extracting points on a PCD cross section together with the center point in order to perform curve fitting and connect the center points. However, a drawback of existing methods is the difficulty of creating a 3D sweeping shape in which the user's preferred feature center points and parameters are applied. This study extracts shape features from cross-sectional points extracted automatically from the PCD and compared with pre-defined feature templates for similarities, thereby acquiring the most similar template cross-section. Fitting the most similar template cross-section to sweeping shape modeling makes the reverse engineering process automatic.

• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.700-706
• /
• 2003

This paper presents a 3D last design system that provides the 3-dimensional last data based on the FFD(Free Form Deformation) method. The proposed system utilizes the control points for deformation factor to convert from the 3D point cloud foot data to the 3D point cloud last data. The deformation factor of the FFD is obtained from the conventional last design technique, and constructed on the FFD lattice based on the bottom view and lateral view of the measured 3D point cloud foot data. In addition, the control points of FFD lattice is decided on the anatomical points of foot. The deformed 3D last obtained from the proposed FFD is saved as a 3D dxf foot data. The experimental results demonstrate that the proposed system have the descent 3D last data based on the openGL window.