• International Journal of Contents
• /
• 제10권3호
• /
• pp.84-89
• /
• 2014

The mass-spring model has been typically employed in physical-based simulators for clothes or patches. The mass-spring model frequently utilizes equal mass and the gravity factor. The model structure of masses supports a shape applicable to fishing nets. Therefore, to create a simulation model of a fishing net, we consider the mass-spring model and adopt the tidal-current and buoyancy effects in underwater environments. These additional factors lead to a more realistic visualization of fishing-net simulations. In this paper, we propose a new mass-spring model for a fishing-net and a method to simplify the calculation equations for a real-time simulation of a fishing-net model. Our 3D mass-spring model presents a mesh-structure similar to a typical mass-spring model except that each intersection point can have different masses. The motion of each mass is calculated periodically considering additional dynamics. To reduce the calculation time, we attempt to simplify the mathematical equations that include the effect of the tidal-current and buoyancy. Through this research, we expect to achieve a real-time and realistic simulation for the fishing net.

• 스마트미디어저널
• /
• 제9권2호
• /
• pp.22-32
• /
• 2020

The hippocampal volume atrophy is known to be linked with neuro-degenerative disorders and it is also one of the most important early biomarkers for Alzheimer's disease detection. The measurements of hippocampal pure volumes from Magnetic Resonance Imaging (MRI) is a crucial task and state-of-the-art methods require a large amount of time. In addition, the structural brain development is investigated using MRI data, where brain morphometry (e.g. cortical thickness, volume, surface area etc.) study is one of the significant parts of the analysis. In this study, we have proposed a patch-based ensemble model of 3-D convolutional neural network (CNN) to measure the hippocampal pure volume from MRI data. The 3-D patches were extracted from the volumetric MRI scans to train the proposed 3-D CNN models. The trained models are used to construct the ensemble 3-D CNN model and the aggregated model predicts the pure volume in one-step in the test phase. Our approach takes only 5 seconds to estimate the volumes from an MRI scan. The average errors for the proposed ensemble 3-D CNN model are 11.7±8.8 (error%±STD) and 12.5±12.8 (error%±STD) for the left and right hippocampi of 65 test MRI scans, respectively. The quantitative study on the predicted volumes over the ground truth volumes shows that the proposed approach can be used as a proxy.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권1호
• /
• pp.38-48
• /
• 2007

본 논문에서는 NURBS(Non-Uniform Rational B-Splines)로 표현된 3차원 곡면을 복원하기 위한 영상 기반 곡면 모델링 기법을 제안한다. 카메라 보정이 수행된 복수의 영상으로부터 사용자가 대응곡선을 지정하면 카메라의 정보를 이용하여 대응 곡선의 3차원 복원을 수행한다. 사용자 인터페이스에 의해 각 영상에서 곡선을 지정하기 위하여 본 논문에서는 NURBS 곡선을 이용하였으며 bilinear surface, ruled surface, generalized cylinder, surface of revolution등의 기본 곡면뿐 아니라 skinned surface, swept surface, boundary patch등의 고급 곡면 생성을 지원하여 다양한 모양의 곡면 물체를 모델링 할 수 있다. 또한 영상을 기반으로 view-dependent 텍스처 생성방법을 지원하여 좀더 사실적인 곡면의 복원을 수행한다. 생성된 3차원 곡선 또는 곡면은 VRML과 같은 표준 형식으로 출력하여 재사용할 수 있다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제7권5호
• /
• pp.267-273
• /
• 2003

We have investigated the effect on inducing substate(s) of positively charged residues replaced in position 172 of the second transmembrane domain in murine inward rectifier potassium channels, formed by stable or transient transfection of Kir2.1 gene in MEL or CHO cells. Single channel recordings were obtained from either cell-attached patches or inside-out patches excised into solution containing 10 mM EDTA to rule out the effect of $Mg^{2+}$ on the channel gating. The substate(s) could be recorded with all mutants D172H, D172K and D172R. The unitary current-voltage (I-V) relation was not linear with D172H at $pH_i$ 6.3, whereas the unitary I-V relation was linear at $pH_i$ 8.0. The relative occupancy at $S_{LC}$ was increased from 0.018 at $pH_i$ 8.0 to 0.45 at $pH_i$ 5.5. In H-N dimer, that was increased from 0.016 at $pH_i$ 8.0 to 0.23 at $pH_i$ 5.5. The larger the size of the side chain or $pK_a$ with mutants (D172H, D172K and D172R), the more frequent the transitions between the fully open state and substate within an opening. The conductance of the substate also depended upon the pKa or the size of the side chain. The relative occupancy at substate $S_{LC}$ with monomer D172K (0.50) was less than that in K-H dimer (0.83). However, the relative occupancy at substate with D172R (0.79) was similar to that with R-N dimer (0.82). In the contrary to ROMK1, positive charge as well as negative charge in position 172 can induce the substate rather than block the pore in murine Kir2.1. The single channel properties of the mutant, that is, unitary I-V relation, the voltage dependence of the mean open time and relative occupancy of the substates and the increased latency to the first opening, explain the intrinsic gating observed in whole cell recordings.

• Advances in nano research
• /
• 제15권2호
• /
• pp.175-189
• /
• 2023

The under-evaluation structure includes a functionally graded porous (FGP) core which is confined by two piezoelectric carbon nanotubes reinforced composite (CNTRC) layers. The whole structure rests on the Pasternak foundation. Using quasi-3D hyperbolic shear deformation theory, governing equations of a sandwich plate are driven. Moreover, face sheets are subjected to the electric field and the whole model is under thermal loading. The properties of all layers alter continuously along with thickness direction due to the CNTs and pores distributions. By conducting the current study, the results emerged in detail to assess the effects of different parameters on buckling of structure. As instance, it is revealed that highest and lowest critical buckling load and consequently stiffness, is due to the V-A and A-V CNTs dispersion type, respectively. Furthermore, it is revealed that by porosity coefficient enhancement, critical buckling load and consequently, stiffness reduces dramatically. Current paper results can be used in various high-tech industries as aerospace factories.

• 한국의류산업학회지
• /
• 제12권4호
• /
• pp.467-476
• /
• 2010

The purpose of this study was to develop a plausible methodology based on experimental data how to set up darts and split lines on 3D parametric body dressed with tight-fit garment. The results were as following: Through the process of making convex hull, the concave parts were straightened to make a convex hull, especially in the center part of bust, under breast part and scapular part. To figure out the optimum positions of darts and split lines, the inflection points of curve ratio were searched along the horizontal polylines of waist and bust. This procedures produced reliable results with low deviation. Using Rapidform, CATIA and Unigraphics, six patches of bodice patterns were drawn and aligned. Paired t-test results showed the outline and area between 3D surface and 2D were not significantly different, meaning this method could be adaptable when flattening 3D surfaces. The amount of waist dart measured on the pattern showed that the highest portion was allocated on 2nd dart(back), followed by 1st dart(back), 1st dart(front), 2nd dart(front)/side dart, and center back dart. A series of findings suggested that curve ration inflection point could be used as a guide to set up darts and split line on 3D parametric model with low deviation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권3호
• /
• pp.180-185
• /
• 2005

Microstrip antennas generally have a lot of advantages that are thin profile, lightweight, low cost, and conformability to a shaped surface application with integrated circuitry. In addition to military applications, they have become attractive candidates in a variety of commercial applications such as mobile satellite communications, the direct broadcast system (DBS), global positioning system (GPS), and remote sensing. Recently, many of the researches have been achieved for improving the impedance bandwidth of microstrip antennas. The basic form of the microstrip antenna, consisting of a conducting patch printed on a grounded substrate, has an impedance bandwidth of $1\~2\%$. For improvement of narrow bandwidth of microstrip patch, we were designed U-slot microstrip patch antenna in this paper. This antenna had wide bandwidth for all personal communication services (PCS) and IMT-2000. For the design of U-slot microstrip patch antenna using a finite difference time domain(FDTD) method. This numerical method could get the frequency property of U-slot patch antenna and the electromagnetic fields of slots.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2009년도 춘계학술대회 논문집
• /
• pp.296-300
• /
• 2009

가상현실이나 인터넷 웹지도 서비스와 같이 3차원의 실세계를 시스템 상에 그대로 재현(reconstruction)하기 위해서는 정교하고 세밀한 3차원 도시모델이 필수적이다. 이러한 3차원 도시모델의 자동생성은 원격탐사 및 사진측량 분야에서 많은 연구가 수행되고 있다. 이러한 연구들은 다양한 센서 데이터와 기 구축되어 있는 GIS자료를 이용하여 건물, 도로, 지형 등의 도시모델을 자동으로 생성하고자 한다. 그러나 대부분의 연구에서 추출한 각 기본요소(primitives)-평면패치(planar patches), 에지(edges), 모서리(corners)에 대한 국부적인 정제(refinement)는 수행하였으나, 생성한 건물 모델에 대한 광역적인 조정을 통한 정규화에 대한 연구는 미비한 상태이다. 본 연구에서는 다양한 데이터로부터 생성된 B-rep (boundary representation) 형태의 건물 모델에 대하여 기하학적인 제약요소(constraints)를 이용한 정규화(regularization) 방법론을 제시하고자 한다. 제안하는 방법은 건물의 Domain Knowledge에 기반하여 도출한 건물을 구성하는 기본요소(primitives)간의 인접성, 직교성, 평행성, 교차성 등의 다양한 제약조건을 이용하여 광역적으로 조정한다. 시뮬레이션 데이터에 적용한 결과의 분석을 통해 제안된 정규화 방법을 통해 오차가 포함된 건물모델이 보다 정형화된 형태로 조정되었음을 확인하였다.

• 한국항행학회논문지
• /
• 제12권2호
• /
• pp.100-108
• /
• 2008

본 논문에서는 4세대 이동통신용 이중접지 내장형 고이득, 광대역 안테나를 설계 및 제작하였다. 최적으로 설계된 안테나는 공기층에 의해 분리되어진 방사패치와 접지면의 유동에 의한 안테나의 파손을 막기 위해서 foam(${\varepsilon}_r{\fallingdotseq}1.03$)으로 고정하였으며, 방사패치는 0.05 [mm] 두께의 도체를 사용하였고, Ground는 FR4 기판을 사용하였다. 최적 설계된 안테나는 그 제작 방법이 간단하여 인쇄회로 기판은 사진 식각법으로 동 테이프는 수작업으로 제작하였다. 제작된 안테나의 입력 반사손실 -10 [dB]이하 (VSWR $$\leq_-$$ 2)를 기준으로 3499 ~ 4743 [MHz]까지 1244[MHz]라는 광대역 특성을 나타내었다. 3400, 3600, 3800, 4000, 4200[MHz]에 대하여 방사패턴을 측정한 결과 무지향성의 특성을 얻을 수 있었으며, E-plane에서 4.7 ~ 6.1 [dBi], H-plane 에서 2.1 ~ 4.3 [dBi]라는 높은 이득 결과를 얻을 수 있었다.

• 한국전자파학회논문지
• /
• 제20권8호
• /
• pp.694-700
• /
• 2009

본 논문에서는 주변 유전체에 의한 성능 열화가 적고 잉크 프린팅 기법에 적합한 RFID 태그 안테나를 제안하였다. 제안된 태그 안테나는 PET 기판 위에 잉크 프린팅 기법으로 제작되어 대량 생산에 용이하며, 범용 RFID 사용 주파수($860{\sim}960$ MHz)를 만족시키고 주변 유전물질의 영향에 의한 성능 변화를 최소화 할 수 있도록 설계하였다. 제안된 태그 안테나는 본체 중앙부에 T 정합회로를 사용하고 미앤더 구조와 직선 구조의 보조 선로 2개를 본체 상단에 삽입하여 캐패시티브 결합을 이용해 태그 칩과의 임피던스 공액 정합이 쉽게 이루어지도록 하였다. 또한, 2개의 보조 선로가 각각 다른 부착 물체의 유전율에서 상호 보완적으로 전류를 유기시키도록 하여 주변 유전물질의 영향에 의한 성능 변화가 최소화 되도록 설계하였다. 측정 결과, 제안된 안테나는 $844{\sim}1,268$ MHz의 대역폭에서 반전력 반사 손실을 만족하였으며, 송신 출력이 20 dBm이고, 안테나 이득이 6 dBi인 리더 안테나를 사용하였을 때 자유공간에서 3.5 m의 인식 거리 성능을 보였다. 또한,나무(${\varepsilon}_r$=2.2)와FR4(${\varepsilon}_r$=4.3)같은 유전율을 가지는 물질에 부착 후 인식 거리를 측정한 결과 각각 2.61 m와 2.51 m의 인식 거리 성능을 보였다.