• 한국의류학회지
• /
• 제27권7호
• /
• pp.843-850
• /
• 2003

Cu/PET film composites were prepared by electroless copper plating method. In order to improve adhesion between electroless plated Cu layer and polyester (PET) film, the effect of pretreatment conditions such as etching method, mixed catalyst composition were investigated. Chemical etching and plasma treatment increased surface roughness in decreasing order of Ar＞HCl＞O$_2$＞NH$_3$. However, adhesion of Cu layer on PET film increased in the following order: $O_2$＜Ar＜HCl＜NH$_3$. It indicated that appropriate surface roughness and introduction of affinitive functional group with Pd were key factors of improving adhesion of Cu layer. PET film was more finely etched by HCI tolution, resulting in an improvement in adhesion between Cu layer and PET film. Plasma treatment with NH$_3$produced nitrogen atoms on PET film, which enhances chemisorption of Pd$^{2+}$ on PET film, resulting in improved adhesion and shielding effectiveness of Cu layer deposited on the Pd catalyzed surface. Surface morphology of Cu plated PET film revealed that Pd/Sn colloidal particles became more evenly distributed in the smaller size by increasing the molar ratio of PdCl$_2$; SnCl$_2$from 1 : 4 to 1 : 16. With increasing the molar ratio of mixed catalyst, adhesion and shielding effectiveness of Cu plated PET film were increased.d.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2947-2952
• /
• 2013

Three coordination polymers, [$ML_2(H_2O)_2$] (M = Co (1), Ni (2), Mn (3)), were prepared from metal acetates ($M(CH_3COO)_2{\cdot}4H_2O$) and 3-pyridinepropionic acid ($HL=(3-py)-CH_2CH_2COOH$) by solvent-layer methods. By contrast, a discrete molecular compound, trans-[$Pd(HL)_2Cl_2$] (4), was synthesized by replacing benzonitrile (PhCN) ligands in trans-[$Pd(PhCN)_2Cl_2$] with HL under microwave-heating conditions. Compounds 1-3 have a 2D framework, and compound 4 contains a square-planar Pd metal.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.396-400
• /
• 2007

A novel technique has been proposed and related experimental works have been performed in order to detect the partial discharges and the location of the possible defects introduced into the Gas Insulated Switchgear. For this purpose, a prototype HY Pockels sensor has been developed and then employed in order to investigate its field applicability for finding the location of the defects using a 170kV GIS mock-up. Our proposed sensor enables us to measure the electric field variation due to the PD occurrence. In addition, the different PD patterns are observed, which might be dependant on the location and the distance of the sensor with respect to the PD source. Throughout this work, its linear response has been proved to be admissible as a function of the applied voltage. And also the position of the PD source might be distinguished by comparing the PD patterns.

• 한국안광학회지
• /
• 제19권4호
• /
• pp.551-555
• /
• 2014

목적: 본 연구는 약시치료에 의한 감각개선이 굴절이상, 조절 및 원근 사위의 안기능에 영향을 미치는지를 알아보고자 하였다. 방법: 본 연구는 약시가 치료된 10명(17안, 평균나이 $10.7{\pm}2.9$년)을 대상으로 약시 치료 전과 치료 후의 굴절이상도, 조절오차 및 원근 사위를 비교하였다. 굴절이상도는 개방형 자동굴절검사기(N-Vision-5001, Shin Nippon, Japan)로 측정하였며 조절오차는 40 cm 거리에서 단안평가법(MEM)을 이용하여 측정하였다. 사위는 원거리는 3 m 근거리는 40 cm에서 Howell 사위카드, 차폐 또는 Maddox rod에 의한 방법으로 측정하여 비교 분석하였다. 결과: 평균 교정시력은 약시치료 전에 $0.46{\pm}0.11$(소수시력)에서 약시치료 후에 $1.03{\pm}0.13$으로 유의하게 증가되었다(p < 0.001). 구면굴절이상도는 치료 전에 원시도가 $+2.29{\pm}0.86D$에서 치료 후에 $+1.1{\pm}2.38D$로 감소하였지만(p < 0.05), 난시변화는 치료 전에 $-1.80{\pm}1.41D$에서 치료 후에 $-1.65{\pm}1.30D$로 유의적 변화가 없었다. 조절오차는 치료 전에는 조절지체 $+1.1{\pm}0.75D$에서 치료 후에는 $+0.5{\pm}0.59D$로 유의적 수준에서 감소하였다(p<0.05). 원거리사위는 치료 전에는 eso $2.9{\pm}6.17PD$(prism diopters)에서 치료 후에 eso $0.2{\pm}3.49PD$로 유의 수준에서 감소하였고, 근거리 사위 또한 치료 전에는 eso $0.4{\pm}2.32PD$에서 치료 후에는 exo $2{\pm}4.9PD$로 유의 수준에서 변화하였다(p<0.05). 시력 향상과 조절력 감소는 높은 상관관계(r = 0.88, p < 0.001)가 있었다. 결론: 약시치료 후 교정시력과 시감각의 개선과 함께 원시성 굴절이상도는 감소하였으며 약시치료에 의한 시감각의 개선은 조절오차를 개선시키고 조절에 영향을 받는 사위를 변화시키는 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.476-477
• /
• 2007

This paper described the partial discharge (PD) measurement techniques for diagnosing gas-insulated switches in overhead power distribution system. A capacitive voltage probe to detect PD pulse was designed and fixed on the surface of a bushing. We also designed a coupling network to attenuate AC voltage by 270 dB, and a low-noise amplifier having the gain of 40 dB and 500 kHz~20 MHz 3 dB. From the calibration, it was calculated that the sensitivity of the measurement system was 0.94mV/pC. In the application experiment, we could measure a PD pulse of 45 pC.

• 한국진공학회지
• /
• 제5권1호
• /
• pp.14-24
• /
• 1996

We have investigated atomic and electronic structures of a clean Pd(111) surface using low energy electron diffraction (LEED) and angle-resolved photoemission spectroscopy (ARPES). A typical clean LEED pattern with a 3-fold symmetry has been observed, corresponding to that for an fcc (111) surface. ARPES measurements have been performed along the $\Gamma-M,\Gamma-K,\Gamma-M$TEX> symmetry lines, from which the experimental band structure of Pd(111) has been determined. The experimental band structure and work function of Pd(111) surface are found to agree well with the calculated band structure of bulk Pd and the calculated work function of Pd(111), respectively. However, the peak positions in the experimental band structure are located closer to the Fermi level than in the theoretical band structure by 0.1~0.8 eV, depending on the $\kappa$-points in the Brillouin zone. In additin, the experimental band widths are narrower than the theoretical band widths by about 0.5eV. The effects of the localized surface Pd 4d states and the Coulomb interaction between Pd 4d bulk electrons have been discussed as possible origins of such discrepancies between experiment and theory.

• 분석과학
• /
• 제12권5호
• /
• pp.355-359
• /
• 1999

뇨중 미량 카드뮴 분석에 흑연로 장치가 부착된 원자흡수분광광도계(GFAAS)를 사용하였다. 불꽃분광법에서 시료는 회화하여 Na-DDTC로 착물을 형성한 후 MIBK로 추출하였으며, 비불꽃분광법에서는 1% Triton X-100과 1% $HNO_3$으로 5배 희석시킨 후 $Pd(NO_3)_2$를 매트릭스 개선제로 농도를 변화시키면서 회화 온도 $450-750^{\circ}C$에서 pyrocoated 흑연 튜브를 사용하여 분석하였다. 그 결과 불꽃분광법보다는 비불꽃분광법이 전처리가 간단하고 재현성있게 나타났으며, 비불꽃분광법을 이용한 경우 $Pd(NO_3)_2$ 100 mg/L을 사용하여 회화온도 $550^{\circ}C$에서 분석시 가장 높은 흡광도를 나타냈다. 본 분석법을 표준뇨인 Lononorm-Metalle 3 중의 카드뮴 분석에 적용하였다.

• Journal of electromagnetic engineering and science
• /
• 제9권3호
• /
• pp.152-158
• /
• 2009

We have developed a novel digital feedback predistortion(DFBPD) linearization based on RF feedback PD for the wide bandwidth modulated signals. The wideband PD operation is carried out by combining the DFBPD and memory lookup table(LUT). To experimentally demonstrate the linearization performance of the proposed PD technique for wideband signal, a class-AB amplifier using an LDMOSFET MRF6S23140 with 140-W peak envelope power is employed at 2.345 GHz. For a forward-link 2FA wideband code-division multiple-access signal with 10 MHz carrier spacing, the proposed DFBPD with memory LUT delivers the adjacent channel leakage ratio at an 10 MHz offset of -56.8 dBc, while those of the amplifier with and without DFBPD are -43.2 dBc and -41.9 dBc, respectively, at an average output power of 40 dBm. The experimental result shows that the new DFBPD with memory LUT provides a good linearization performance for the signal with wide bandwidth.

• 폴리머
• /
• 제35권2호
• /
• pp.146-151
• /
• 2011

폴리(에틸렌 나프탈레이트) 중합 시 2,6-dimethyl naphthalene dicarboxylate와 함께 사용되는 디올 화합물인 ethylene glycol(EG), 1,3-propanediol(PD) 그리고 1,4-butanediol(BD)의 사용에 따른 공중합체의 물성을 살펴보았다. EG와 함께 PD 혹은 BD를 40% 이내 첨가하는 경우 합성된 폴리에스터가 무정형을 유지함을 알 수 있으며 이는 열적 특성과 배향 특성, 그리고 기계적 특성을 저하시키는 반면 치수안정성을 증가시킴을 획인할 수 있어 합성 폴리에스터가 유연기판 소재로의 적용 가능성을 확인하였다.

• Journal of Electrochemical Science and Technology
• /
• 제9권3호
• /
• pp.202-211
• /
• 2018

In this work, Fe-Pd alloy films have been electrodeposited on different substrates using an electrolyte containing $[Pd(NH_3)_4]^{2+}$ (0.02 M) and $[Fe-Citrate]^{2+}$ (0.2 M). The influences of substrate and overpotential on chemical composition, nucleation and growth kinetics as well as the electrodeposited films morphology have been investigated using energy dispersive X-ray spectroscopy (EDS), current-time transients, scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD) patterns. In all substrates - brass, copper and sputtered fluorine doped tin oxide on glass (FTO/glass) - Fe content of the electrodeposited alloys increases by increasing the overpotential. Also the cathodic current efficiency is low due to high rate of $H_2$ co-reduction. Regarding the chronoamperometry current-time transients, it has been demonstrated that the nucleation mechanism is instantaneous with a typical three dimensional (3D) diffusion-controlled growth in the case of brass and copper substrates; while for FTO, the growth mode changes to 3D progressive. At a constant overpotential, the calculated number of active nucleation sites for metallic substrates is much higher than that of FTO/glass; however by increasing the overpotential, the number of active nucleation sites increases. The SEM micrographs as well as the XRD patterns reveal the formation of Fe-Pd alloy thin films with nanostructure arrangement and ultra-fine grains.