• 제목/요약/키워드: 3D Object Model

검색결과 575건 처리시간 0.027초

배수개선공법개발에 관한 연구(I) -각종 지하배수용 암거재료의 배수성능- (Drainage Performance of Various Subsurface Drain Materials-)

  • 김철회;이근후;유시조;서원명
    • 한국농공학회지
    • /
    • 제21권3호
    • /
    • pp.104-120
    • /
    • 1979
  • I. Title of the Study Studies on the Development of Improved Subsurface Drainage Methods. -Drainage Performance of Various Subsurface Drain Materials- II. Object of the Study Studies were carried out to select the drain material having the highest performance of drainage; And to develop the water budget model which is necessary for the planning of the drainage project and the establishment of water management standards in the water-logged paddy field. III. Content and Scope of the Study 1. The experiment was carried out in the laboratory by using a sand tank model. The drainage performance of various drain materials was compared evaluated. 2. A water budget model was established. Various parameters necessary for the model were investigated by analyzing existing data and measured data from the experimental field. The adaptability of the model was evaluated by comparing the estimated values to the field data. IV. Results and Recommendations 1. A corrugated tube enveloped with gravel or mat showed the highest drainage performance among the eight materials submmitted for the experiment. 2. The drainage performance of the long cement tile(50 cm long) was higher than that of the short cement tile(25 cm long). 3. Rice bran was superior to gravel in its' drain performance. 4. No difference was shown between a grave envelope and a P.V.C. wool mat in their performance of drainage. Continues investigation is needed to clarify the envelope performance. 5. All the results described above were obtained from the laboratory tests. A field test is recommended to confirm the results obtained. 6. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as follows; $$D=\Sigma\limit_{t=1}^{n}(Et-R_{\ell}-I+W_d)..........(17)$$ 7. Among the various empirical formulae for potential evapotranspiration, Penman's formular was best fit to the data observed with the evaporation pans in Jinju area. High degree of positive correlation between Penman;s predicted data and observed data was confirmed. The regression equation was Y=1.4X-22.86, where Y represents evaporation rate from small pan, in mm/100 days, and X represents potential evapotranspiration rate estimated by Penman's formular. The coefficient of correlation was r=0.94.** 8. To estimate evapotranspiration in the field, the consumptive use coefficient, Kc, was introduced. Kc was defined by the function of the characteristics of the crop soil as follows; $Kc=Kco{\cdot}Ka+Ks..........(20)$ where, Kco, Ka ans Ks represents the crop coefficient, the soil moisture coefficient, and the correction coefficient, respectively. The value of Kco and Ka was obtained from the Fig.16 and the Fig.17, respectively. And, if $Kco{\cdot}Ka{\geq}1.0,$ then Ks=0, otherwise, Ks value was estimated by using the relation; $Ks=1-Kco{\cdot}Ka$. 9. Into type formular, $r_t=\frac{R_{24}}{24}(\frac{b}{\sqrt{t}+a})$, was the best fit one to estimate the probable rainfall intensity when daily rainfall and rainfall durations are given as input data, The coefficient a and b are shown on the Table 16. 10. Japanese type formular, $I_t=\frac{b}{\sqrt{t}+a}$, was the best fit one to estimate the probable rainfall intensity when the rainfall duration only was given. The coefficient a and b are shown on the Table 17. 11. Effective rainfall, Re, was estimated by using following relationships; Re=D, if $R-D\geq}0$, otherwise, Re=R. 12. The difference of rainfall amount from soil moisture depletion was considered as the amount of drainage required. In this case, when Wd=O, Equation 24 was used, otherwise two to three days of lag time was considered and correction was made by use of storage coefficient. 13. To evaluate the model, measured data and estimated data was compared, and relative error was computed. 5.5 percent The relative error was 5.5 percent. 14. By considering the water budget in Jinju area, it was shown that the evaporation amount was greater than the rainfall during period of October to March in next year. This was the behind reasonning that the improvement of surface drainage system is needed in Jinju area.

  • PDF

Highly Dense 3D Surface Generation Using Multi-image Matching

  • Noh, Myoung-Jong;Cho, Woo-Sug;Bang, Ki-In
    • ETRI Journal
    • /
    • 제34권1호
    • /
    • pp.87-97
    • /
    • 2012
  • This study presents an automatic matching method for generating a dense, accurate, and discontinuity-preserved digital surface model (DSM) using multiple images acquired by an aerial digital frame camera. The proposed method consists of two main procedures: area-based multi-image matching (AMIM) and stereo-pair epipolar line matching (SELM). AMIM evaluates the sum of the normalized cross correlation of corresponding image points from multiple images to determine the optimal height of an object point. A novel method is introduced for determining the search height range and incremental height, which are necessary for the vertical line locus used in the AMIM. This procedure also includes the means to select the best reference and target images for each strip so that multi-image matching can resolve the common problem over occlusion areas. The SELM extracts densely positioned distinct points along epipolar lines from the multiple images and generates a discontinuity-preserved DSM using geometric and radiometric constraints. The matched points derived by the AMIM are used as anchor points between overlapped images to find conjugate distinct points using epipolar geometry. The performance of the proposed method was evaluated for several different test areas, including urban areas.

근접장 광학계의 광학적 및 기계적 특성 분석과 근접장 간격제어 (Optical and Mechanical Characteristics of NF System and NF Gap Control)

  • 오형렬;이준희;권대갑;김수경
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.1528-1532
    • /
    • 2000
  • The conventional optics and near field optics are compared numerically in the view points of the spot size and propagation characteristics. The decaying characteristics of near field light require the optics to access the object within several tens of nanometers. Therefore the gap control is one of the main issues in the near field optics area. In this paper the gap control is done by using the shear force of the NF(Near Field) probe and the characteristics are examined. The probe is modeled as a 2'nd order mass-spring-damper system driven by a harmonic force. The primary cause of the decrease in vibration amplitude is due to the damping force - shear force - between the surface and the probe. Using the model, damping constant and resonance frequency of the probe is calculated as a function of probe-sample distance. Detecting the amplitude and phase shift of the NF probe attached to the high Q-factor piezoelectric tuning fork, we can control the position of the NF probe about 0 to 50nm above the sample. The feedback signal to regulate the probe-sample distance can be used independently for surface topography imaging. 3-D view of the shear force image of a testing sample with the period of $1{\mu}m$ will be shown.

  • PDF

Improved 3D Resolution Analysis of N-Ocular Imaging Systems with the Defocusing Effect of an Imaging Lens

  • Lee, Min-Chul;Inoue, Kotaro;Cho, Myungjin
    • Journal of information and communication convergence engineering
    • /
    • 제13권4호
    • /
    • pp.270-274
    • /
    • 2015
  • In this paper, we propose an improved framework to analyze an N-ocular imaging system under fixed constrained resources such as the number of image sensors, the pixel size of image sensors, the distance between adjacent image sensors, the focal length of image sensors, and field of view of image sensors. This proposed framework takes into consideration, for the first time, the defocusing effect of the imaging lenses according to the object distance. Based on the proposed framework, the N-ocular imaging system such as integral imaging is analyzed in terms of depth resolution using two-point-source resolution analysis. By taking into consideration the defocusing effect of the imaging lenses using ray projection model, it is shown that an improved depth resolution can be obtained near the central depth plane as the number of cameras increases. To validate the proposed framework, Monte Carlo simulations are carried out and the results are analyzed.

BIM and Thermographic Sensing: Reflecting the As-is Building Condition in Energy Analysis

  • Ham, Youngjib;Golparvar-Fard, Mani
    • Journal of Construction Engineering and Project Management
    • /
    • 제5권4호
    • /
    • pp.16-22
    • /
    • 2015
  • This paper presents an automated computer vision-based system to update BIM data by leveraging multi-modal visual data collected from existing buildings under inspection. Currently, visual inspections are conducted for building envelopes or mechanical systems, and auditors analyze energy-related contextual information to examine if their performance is maintained as expected by the design. By translating 3D surface thermal profiles into energy performance metrics such as actual R-values at point-level and by mapping such properties to the associated BIM elements using XML Document Object Model (DOM), the proposed method shortens the energy performance modeling gap between the architectural information in the as-designed BIM and the as-is building condition, which improve the reliability of building energy analysis. Several case studies were conducted to experimentally evaluate their impact on BIM-based energy analysis to calculate energy load. The experimental results on existing buildings show that (1) the point-level thermography-based thermal resistance measurement can be automatically matched with the associated BIM elements; and (2) their corresponding thermal properties are automatically updated in gbXML schema. This paper provides practitioners with insight to uncover the fundamentals of how multi-modal visual data can be used to improve the accuracy of building energy modeling for retrofit analysis. Open research challenges and lessons learned from real-world case studies are discussed in detail.

모션켑쳐(Motion Capture)를 이용한 무형문화재의 기록화 방안에 대한 제연구 (Methods of Motion Capturing Intangible Cultural Properties in Japan)

  • 박원모
    • 헤리티지:역사와 과학
    • /
    • 제36권
    • /
    • pp.335-346
    • /
    • 2003
  • With the development of media and computer, Motion Capture system, recently used in the entertainment and computer graphics, is emerging as a new recording method. Motion Capture is a system that records time-varying position of sensors which are attached to a objects and translates it to 3-D coordinate on computer. The motion of object displays the time-varying positions of each sensors that are graphed, or the line connected man-shaped model's movements on the computer monitor. And by adding computer graphic character to it, the various angled images, which are difficult to be perceived on the stage, can be easily recorded. Recently in Japan, Motion Capture system is being actively studied in order to use it in recording and preserving the intangible cultural assets of dance and art. Especially, Warabiza in Tazawako art village at Akita plays the leading role in this area through the project to symbolize and establish the archive of cultural dance, further, Ritsumeikan Univ. is develops the system for coupling the motion capture system to Labanotation. This article introduces the motion capture and it's related studies in Japan, which are being actively studied as a new recording method of intangible cultural assets.

Updating BIM: Reflecting Thermographic Sensing in BIM-based Building Energy Analysis

  • Ham, Youngjib;Golparvar-Fard, Mani
    • 국제학술발표논문집
    • /
    • The 6th International Conference on Construction Engineering and Project Management
    • /
    • pp.532-536
    • /
    • 2015
  • This paper presents an automated computer vision-based system to update BIM data by leveraging multi-modal visual data collected from existing buildings under inspection. Currently, visual inspections are conducted for building envelopes or mechanical systems, and auditors analyze energy-related contextual information to examine if their performance is maintained as expected by the design. By translating 3D surface thermal profiles into energy performance metrics such as actual R-values at point-level and by mapping such properties to the associated BIM elements using XML Document Object Model (DOM), the proposed method shortens the energy performance modeling gap between the architectural information in the as-designed BIM and the as-is building condition, which improve the reliability of building energy analysis. The experimental results on existing buildings show that (1) the point-level thermography-based thermal resistance measurement can be automatically matched with the associated BIM elements; and (2) their corresponding thermal properties are automatically updated in gbXML schema. This paper provides practitioners with insight to uncover the fundamentals of how multi-modal visual data can be used to improve the accuracy of building energy modeling for retrofit analysis. Open research challenges and lessons learned from real-world case studies are discussed in detail.

  • PDF

절차적 생성 방법을 이용한 실시간 갯벌 모델링 (Realtime Tidal Flat Modeling using Procedural Generation Method)

  • 박상현
    • 한국전자통신학회논문지
    • /
    • 제16권5호
    • /
    • pp.947-956
    • /
    • 2021
  • 메타버스에 대한 관심이 증가하면서 가상현실을 간접 체험에 접목하려는 많은 노력이 이루어지고 있으며, 게임과 같은 오락뿐만 아니라 학생들의 교육에 활용하고자 하는 시도도 증가하고 있다. 간접 체험의 핵심적인 기술은 사용자가 실제와 같이 느낄 수 있게 대상을 모델링하는 것이다. 갯벌과 같은 자연환경은 시간에 따라 수시로 변하고, 많은 생명체들도 서식한다. 본 논문에서는 갯벌의 생태 환경을 사실적으로 표현하는 체험 콘텐츠를 제작하는 방법을 제안한다. 제안하는 방법에서는 갯벌이 시간적으로 변화하는 모습을 자연스럽게 모델링하는 방법을 설명하고, 갯벌에 서식하는 생명체인 게를 행동 트리를 이용하여 NPC 형태로 모델링하는 방법을 설명한다. 구현 결과는 제안하는 방법이 간단한 알고리즘을 사용하지만 갯벌의 모습을 잘 표현하는 것을 보여준다.

축약형 신경망과 휴리스틱 검색에 의한 소프트웨어 공수 예측모델 (Parsimonious Neural Network and Heuristic Search Method for Software Effort Estimation Model)

  • 전응섭
    • 정보처리학회논문지D
    • /
    • 제8D권2호
    • /
    • pp.154-165
    • /
    • 2001
  • 소프트웨어공수 예 에 관한 전공적인 모델링의 한계점을 극복하기 위해 사례기반과 신경망 그리고 퍼지이론 및 전문가 시스템 등 인공지능 기법을 이용한 연구들이 제시되고 있다. 특히 신경망을 이용한 공수예측 모델들이 예측력에 있어서 전통적인 모델들 보다 우수한 예측결과를 제시하고 있다. 그러나 이들 신경망 모델에 있어서도 고려되어야 할 점은 입력 데이터의 노이즈와 모델 설계 및 사용에 있어서 유연성 및 요율성 측면이 제기되고 있다. 본 연구에서는 이러한 기존의 신경망모델의 효율성 향상을 위한 새로운 방안으로 최적의 축약형 모델구조와 이에 관련된 최적 사례들을 사용하기 위한 사례기반 휴리스틱 검색기법을 제시한다. 30여개의 실제로 수행된 프로젝트의예측결과를 통해 최적사례 기반 축약형 신경망 모델의 결과가 저통적인 COCOMO 모델 그리고 기존의 신경망 모델과 비교해서 예측력과 모델의 유연성이 좋아졌음은 알 수 있었다. 따라서 본 연구에서 새롭게 제시한 축약형 모델과 최적사례기반 접근 방법은 급변하는 정보시스템 패러다임하에서도 유용하게 사용될 수있을 것이다.있을 것이다.

  • PDF

구조물 monitoring을 위한 지상사진측량기법의 개발 (Development of Terrestrial Photogrammetric Technique for Structure Monitoring)

  • 한승희;강준목
    • 대한토목학회논문집
    • /
    • 제14권1호
    • /
    • pp.151-160
    • /
    • 1994
  • 지상사진측량은 최근 GIS구축을 위한 자료의 수집으로부터 각종 첨단산업분야에 그 응용이 증대되고 있다. 특히 정밀기계부품 또는 모의실험을 위한 모형제작시, 사진측량기법을 이용하여 다량의 3차원 수치 데이타를 균일한 정확도로 신속, 정확하게 획득할 수 있고 또한 이를 모델링에 이용할 수 있기 때문이다. 본 연구에서는 모의실험을 위한 선박모형을 monitoring하기 위해 신속하게 촬영할 수 있는 다중사진기 시스템을 구성하고 정확도 해석은 물론 network 형성을 위해 촬영기법, 기준점 수 및 배치, 미지점, 수렴촬영, 스트림 조합에 대한 오차를 분석, 이를 적용 선박모형에 대한 각 단면형상과 3차원 monitoring을 실시하였다. 연구결과, 정밀모형선박의 전면(全面)에 대한 모니터링을 통하여 개발한 다중사진기시스템의 효용성을 입증할 수 있었으며 pass point를 배치하여 3차원 데이타를 기대정확도로 얻을 수 있었으므로 구조물의 정밀해석은 물론 순간변형측정의 가능성을 제시할 수 있었다.

  • PDF