• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.249-250
• /
• 2002

In this paper, the relationship among the 3-D surface topography parameters are studied. Several surface topography parameters that are important in tribology are calculated against various surface topography data. 3-D surface data with desired properties are generated by using the non-causal 2-D auto-regressive (AR) model. The non-causal 2-D AR model is a random 3-D surface topography model that can generate 3-D surface topography data with specified parameters.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.6-14
• /
• 2012

For integrated complementary metal oxide semiconductor (CMOS) circuits, the lateral spread for two-dimensional (2-D) impurity distributions are very important for the analyzing the devices. The measured two-dimensional SEM data obtained using the chemical etching-method matched very well with the results of the Gauss model for boron implanted samples. But the profiles in boron implanted silicon were deviated from the Gauss model. The profiles in boron implanted silicon were shown a little bit steep profile in the deep region due to backscattering effect on the near surface from the bombardments of light boron ions. From the simulated 3-D data obtained using an analytical model, the 1-D and 2-D data were compared with the experimental data and could be verified the justification from the experimental data. The data of 3-D model were also shown good agreements with the experimental and the simulated data. It can be used in the 3-D chip design and the analysis of microelectro-mecanical system (MEMS) and special devices.

• Spatial Information Research
• /
• 제17권4호
• /
• pp.469-481
• /
• 2009

늘어나는 인구로 인한 토지의 효율적 이용요구 증가, 빠르게 성장하는 건축, 토목기술의 발달로 인간의 생활 공간은 지표에서 지상, 지하로 확대되었다. 기존의 2차원 지적 시스템으로는 이러한 추세를 효과적으로 반영하지 못함을 인식하여, 3차원 지적에 대한 관심이 증가하고 있다. 이 연구에서는 소유권의 법적 안전 보장이라는 지적의 주요한 목적을 위해 한국의 현황에 적합한 3차원 지적 데이터 모델을 제시한다. 제시하는 3차원지적 데이터 모델은 3차원 지적 객체 모델과 3차원 지적 기하학적 모델로 구성되며, 데이터 구축 시 고려될 데이터 구조를 제시하였다. 3차원 지적 객체 모델은 분석된 3차원 권리와 사례 연구로부터 도출된 객체들을 기반으로 설계하였다. 3차원 지적 기하학적 모델은 국제 표준인 ISO19107 공간 스키마를 기반으로 한국의 3차원 지적에 맞게 수정되었다. 3차원 지적 데이터 구조는 점, 선, 면, 입체 요소를 기본 요소로 한다. 본 연구는 서울시의 "유비쿼터스 입체지적 기반조성" 사업의 일부분으로 수행되었으며 전체 연구의 최종 목표는 1) 토지정보의 효율적인 제공 및 관리, 2) 지상 및 지하 공간시설물에 대한 권리 설정 및 범위 표시, 3) 유비쿼터스 기반의 지적정보 서비스, 4) 도시 개발 사업 등에 대한 유비쿼터스 지적 기반의 구축, 5) 토지공간의 권리관계 규정과 이에 따른 등록 및 관리 방안 마련이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.37-38
• /
• 2018

BIM(Building Information Modeling) in the architecture, VDC(Virtual Design and Construction) defined CIFE(Center for Integrated Facility Engineering) of Stanford university in USA, and Data-driven design definition issued by TECDOC-1284 of IAEA are doing data-level design generated by 3D CAD technology, integrating and managing related information based on the 3D model, and Using 3D models effectively during nuclear power plant life cycle. 3D model of domestic nuclear power industry is using interference review between design fields, 4D system linked 3D construction model and schedule activity, but the 3D model generated in the design phase is effectively not utilized during the construction, operation, decommissioning. therefore, This study is aimed to suggest 3D model LOD(Level of Detail) advancement method through the analysis of existing literature, 2D drawings, and 3D models throughout nuclear power plant lifecycle.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.143-148
• /
• 2006

It is still very difficult to generate a geometry model and finite element model, which has complex and many free surface, even though 3D CAD solutions are applied. Furthermore, in the medical field, which is a big growth area of recent years, there is no drawing. For these reasons, making a geometry model, which is used in finite element analysis, is very difficult. To resolve these problems and satisfy the requests of the need to create a 3D digital file for an object where none had existed before, new technologies are appeared recently. Among the recent technologies, there is a growing interest in the availability of fast, affordable optical range laser scanning. The development of 3D laser scan technology to obtain 3D point cloud data, made it possible to generate 3D model of complex object. To generate CAD and finite element model using point cloud data from 3D scanning, surface reconstruction applications have widely used. In the early stage, these applications have many difficulties, such as data handling, model creation time and so on. Recently developed point-based surface generation applications partly resolve these difficulties. However there are still many problems. In case of large and complex object scanning, generation of CAD and finite element model has a significant amount of working time and effort. Hence, we concerned developing a good direct finite element model generation method using point cloud's location coordinate value to save working time and obtain accurate finite element model.

• 한국건설관리학회논문집
• /
• 제5권4호
• /
• pp.107-114
• /
• 2004

4D 모델은 프로젝트 수행 이전에 다양한 공정대안을 비교 검토해볼 수 있는 기능을 제공하나 아직 그 활용이 미비한 실정이다. 이는 4D 모델의 구현에 수반되는 기술적, 경제적 문제에 기인하는 바 크다. 본 논문에서는 3D모델 정보의 활용을 통해 이러한 문제의 해결방안을 제시하였다. 즉, 기 생성된 3D 모델 정보를 가공하여 동일한 3D 모델에 대해 여러 가지 공정대안을 신속하게 생성해내는 공정 자동생성 기능을 이용함으로써 기존 4D시스템 연구에서 문제점으로 지적되었던 정보 변경에 따른 4D 모델 재구현 문제를 상당부분 개선하였다. 또한, 특정 작업기간에 따른 소요물량을 간편하게 산출해내는 물량정보 검색 기능을 통해 4D 모델의 대안검토 기능을 보완하였다. 특히 공정 자동생성 기능에서는 수평 및 수직적 우선순위의 조정을 통해 부재간, 층간 우선순위를 결정할 수 있도록 함으로써 공정순서를 신속하게 생성해낼 수 있는 환경을 제공하였다. 이것은 3D 모델이 변경되지 않은 상태에서 다양한 공정대안의 신속한 생성을 통한 비교 검토에 효과적으로 활용할 수 있으며, 3D 모델이 변경된 경우에도 4D 모델 생성을 위한 이후의 작업과정을 손쉽게 진행시켜 나갈 수 있는 장점이 있다. 아울러 3D 모델로부터 생성되는 물량정보와 공정계획 결과로부터 생성되는 일정정보를 연계시킴으로써 간편하게 일정별 소요물량 정보를 검색할 수 있게 하였다.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.641-642
• /
• 2015

Unlike for other building processes, BIM for earthwork does not need a large variety of 3D model shapes; however, it requires a 3D model that can efficiently reflect the changing features of the ground shape and provide soil type-dependent workload calculation and information on equipment for optimal management. Objects for earthwork have not yet been defined because the current BIM system does not provide them. The BIM technology commonly applied in the manufacturing center uses real-object data obtained through 3D scanning to generate 3D parametric solid models. 3D scanning, which is used when there are no existing 3D models, has the advantage of being able to rapidly generate parametric solid models. In this study, A method to generate 3D models for earthwork operations using reverse engineering is suggested. 3D scanning is used to create a point cloud of a construction site and the point cloud data are used to generate a surface model, which was then converted into a parametric model with 3D objects for earthwork

• 한국산학기술학회논문지
• /
• 제7권1호
• /
• pp.57-62
• /
• 2006

본 논문에서는 3D 의복 착의 시뮬레이션에서 사용되는 3D 의복 모델을 제작하는 시스템을 제안한다. 착의 시뮬레이션을 하기 위해서는 3D 인체모델과 3D 의복 모델이 필요하다. 의복 모델을 디자인하기 위해서는 먼저 작업 Matrix 창을 생성하고 디자이너로부터 2D 피스(Piece)를 디자인한다. 디자인된 피스들을 박음질 선을 이용해 연결하고 마지막으로 디자인된 피스와 박음질 데이터를 사용해 수치 데이터를 생성하여 3D 의복 모델을 만든다. 본 논문에서 제안한 시스템에서는 피스 디자인 모듈, 의복 데이터 읽기/저장 모듈, 착의 시뮬레이션 모듈로 이루어져 있다.

• 한국CDE학회논문집
• /
• 제8권2호
• /
• pp.122-132
• /
• 2003

STEP AP218 has a standard schema to represent the structural model of a midship section. While it helps to exchange ship structural models among heterogeneous automation systems, most shipyards and classification societies still exchange information using 2D paper drawings. We propose a feature parameter input method to generate a 3D STEP model of a ship structure from 2D drawings. We have analyzed the ship structure information contained in 2D drawings and have defined a data model to express the contents of the drawing. We also developed a QUI for the feature parameter input. To translate 2D information extracted from the drawing into a STEP AP2l8 model, we have developed a shape generation library, and generated the 3D ship model through this library. The generated 3D STEP model of a ship structure can be used to exchange information between design departments in a shipyard as well as between classification societies and shipyards.

• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.212-221
• /
• 2010

Proposed in the paper is a methodology to generate kinematic template for 3D JIG models. Recently, according to increase of the rate of automatic facility in manufacturing system, the 3D manufacturing and verification research and development have been issued. So, unlike in the past, moving 3D facilities are very various like JIGs, turn table, AS/RS worked in the automated manufacturing industry. Because 3D mesh models are used in these kinds of 3D simulation, users have to define the kinematic information manually. This 3D mesh data doesn't have parametric information and design history of the 3D model unlike the design level data. So, it is lighter than 3D design level data and more efficient to render on the 3D virtual manufacturing environment. But, when user wants to find a common axis located between the links, the parameter information of the model has to reconstruct for defining kinematic construction. It takes a long time and very repetitive to define an axis and makes a joint using 3D mesh data and it is non-intuitive task for user. This paper proposed template model that provides kinematic information of the JIG. This model is kinds of a state diagram to describe a relation between links. So, this model can be used for a kinematic template to the JIG which has a same mechanism. The template model has to be registered in the template library to use in the future, after user made the model of the specific type of the 3D JIG model.