• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.587-602
• /
• 2023

This article presents the numerical modelling of transient heat transfer in highly heterogeneous composite materials where the thermal conductivity, specific heat and density are assumed to be directional-dependent. This article uses a coupled finite element-finite difference scheme to perform the transient heat transfer analysis of unidirectional (1D) and multidirectional (2D/3D) functionally graded composite panels. Here, 1D/2D/3D functionally graded structures are subjected to nonuniform heat source and inhomogeneous boundary conditions. Here, the multidirectional functionally graded materials are modelled by varying material properties in individual or in-combination of spatial directions. Here, fully spatial-dependent material properties are evaluated using Voigt's micromechanics scheme via multivariable power-law functions. The weak form is obtained through the Galerkin method and solved further via the element-space and time-step discretisation through the 2D-isoparametric finite element and the implicit backward finite difference schemes, respectively. The present model is verified by comparing it with the previously reported results and the commercially available finite element tool. The numerous illustrations confirm the significance of boundary conditions and material heterogeneity on the transient temperature responses of 1D/2D/3D functionally graded panels.

• 한국압력기기공학회 논문집
• /
• 제13권1호
• /
• pp.84-91
• /
• 2017

This paper is proposed to select the optimal finite element type in finite element analysis. Based on the NUREG reports, static analyses were performed using a commercial analysis program, $ABAQUS^{TM}$. In this study, we used a nonlinear kinematic hardening model proposed by Chaboche. The analysis result of solid elements by inputting the same material constants was different from the results of the NUREG report. This is resulted from the difference between shell element and solid element. Therefore, the material constants that have similar result to the experimental result were determined and compared according to element type. In case of using solid element for efficient finite element analysis, we confirmed that the use of C3D8I element type(incompatible mode 8-node linear brick element) leads the accurate result while reducing the analysis time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1288-1293
• /
• 2007

The present study covers the design and analysis of a thermionic scanning electron microscope (SEM) column. The SEM column contains an electron optical system in which electrons are emitted and moved to form a focused beam, and this generates secondary electrons from the specimen surfaces, eventually making an image. The electron optical system mainly consists of a thermionic electron gun as the beam source, the lens system, the electron control unit, and the vacuum unit. In the design process, the dimension and capacity of the SEM components need to be optimally determined with the aid of finite element analyses. Considering the geometry of the filament, a three-dimensional (3D) finite element analysis is utilized. Through the analysis, the beam emission characteristics and relevant trajectories are predicted from which a systematic design of the electron optical system is enabled. The validity of the proposed 3D analysis is also discussed by comparing the directional beam spot radius. As a result, a prototype of a thermionic SEM is successfully developed with a relatively short time and low investment costs, which proves the adoptability of the proposed 3D analysis.

• 대한기계학회논문집A
• /
• 제35권10호
• /
• pp.1237-1242
• /
• 2011

족저부의 압력 분포를 해석하기 위하여 인체에 근접한 족부 상세 해석용 모델을 개발하였다. 이 상세 해석용 모델은 족부의 단층촬영 영상(CT scan image)으로부터 밀도 차이에 따라서 골격부와 피부 및 피하조직을 각각 3D CAD 모델로 변환한 후에 결합하여 구성하였며, 근육과 뼈, 피부 모두를 반영한 3D 족부 유한요소해석 모델로 개발하였다. 개발된 3D 족부 유한요소모델에 대하여 NASTRAN의 접촉해석을 수행하여 족저압의 분포를 계산하였으며, 이러한 결과는 균일분포압력을 작용시키는 당뇨병 환자용 신발 설계의 기초 자료로 활용될 수 있다.

• 한국지반공학회논문집
• /
• 제24권3호
• /
• pp.25-34
• /
• 2008

프리스트레스트 띠장을 적용한 새로운 흙막이 시스템에 대한 유한요소 해석이 수행되었다. 본 연구에서는 프리스트레스트 띠장을 적용한 흙막이 시스템의 거동을 규명하기 위하여 3 차원 유한요소 모델이 적용되었다. 새로운 흙막이 시스템에 대한 유한요소 모델링 절차와 방법이 제시되었다. 지반, 벽체, 버팀보 및 프리스트레스트 띠장 시스템을 구성하고 있는 띠장, 받침대, 강선에 대한 모델링과 지반-벽체 그리고 벽체-띠장 간의 접촉면 모델링이 제시되었다. 벽체 횡방향 변위, 버팀보 축력, 프리스트레스트 띠장 시스템 부재인 띠장과 받침대 축력에 대한 유한요소 해석결과가 현장 계측결과와 비교 검증되었다. 검증된 3 차원 유한요소 모델을 이용하여 강선 인장력 변화에 따른 새로운 프리스트레스트 띠장의 휨모멘트와 변형 거동이 규명되었으며 이에 따른 흙막이 벽체 배면에서의 토압 거동이 규명되었다.

• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.167-174
• /
• 2017

The F3D(Free-Form Formwork 3D Printer) technology that manufactures EPS(Expanded Polystyrene) formworks for irregular-shaped concrete structures by 3D printers was developed to reduce the cost and time. Because of weak strength and low elastic modulus of the EPS, structural performance including lateral pressure by fresh concrete of the formwork that consisted of EPS should be investigated. In order to calculate lateral pressures acting on formwork, several variables including sizes, shapes of formwork, tangential force(fricition) between fresh concrete and formwork, and material properties of fresh concrete should be considered. However, current regulations have not considered the properties of concrete, only focused on vertical formwork. Galleo introduced 3-dimensional finite element analysis models to calculate lateral pressure on formwork. Thus, proposed finite element analysis model based on previous studies were verified for vertical formwork and irregular-shaped formwork. The test results were compared with those by FEM analysis. As a result, the test agrees well with the analysis.

• Geomechanics and Engineering
• /
• 제17권4호
• /
• pp.317-322
• /
• 2019

This paper presents the results of parametric analyses to compute the axial capacity of a suction pile using 2D and 3D finite element approaches. The study is intended to simplify the process of analyzing suction piles from 3D to 2D model. The research focuses on obtaining the coefficient to be applied into the 2D model in order to obtain results that are as close as possible to the 3D model. Two 2D models were used in the analysis, namely the plane strain and axisymmetric models. The analyses were performed using two actual offshore soil data of the North and West Java Indonesia. The study reveals that the simplification of model through 2D Finite Element is achievable by applying the appropriate coefficient to the stiffness parameters. The results show that the simplified model of the 2D FEA provides more conservative results (with the difference between 2% to 7%) than the 3D FEA.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.467-470
• /
• 2005

There are about 10 motors for tile actuator of the automation system in an auto-mobile recently. The performance of the motor-case is much related to the noise and the vibration of an auto-mobile Multi-Forming process is so much the better than existing deep-drawing or Multi-step forming by press by less cost, installation and staff. But there isn't the specific and general process design, so we aren't good at competition. So in the first step, I want to study about the core design for the multi-forming process. We can access by the elasto-plastic theory and the finite element method, and we use a commercial package of the Deform-2D and, Deform-3D which is based on three-dimensional elasto-plastic finite element, evaluated propriety oi the package. The evaluation of the package propriety was simulated by simple bending example. It was found the elasto-plastic theory was mostly in agreement with the simulation. We proposed that three type of section for the core and analyzed by finite element method (Deform-2D). We can get the best result with the ellipse type core. Then we apply the result of the preceding analysis to the finite element method (Deform-3D). In 3D-finite element analysis, we can get the result of 8/100mm-roundness. This result can help the improvement of the multi-forming process.

• Journal of Magnetics
• /
• 제11권4호
• /
• pp.151-155
• /
• 2006

The electromagnetic engine valve actuator is a key technology to achieve variable valve timing in internal combustion engine and the steel core and clapper of the electromagnetic engine valve actuator are laminated to reduce the eddy current loss. To design and characterize the performance of the electromagnetic engine valve actuator, FE (finite element) analysis is the most effective way, but FE (finite element) 3-D modeling of real lamination needs very fine meshes resulting in countless meshes for modeling and numerous computations. In this paper, the equivalent FE 2-D model of electromagnetic engine valve actuator is introduced and FE analysis is performed using the equivalent FE 2-D model.

• 한국철도학회논문집
• /
• 제13권2호
• /
• pp.139-146
• /
• 2010

본 연구에서는 복잡한 3차원 유한요소모델 충돌거동과 등가인 1차원 동역학 모델링 방법을 개발하기 위하여 새로운 1-D 모델링 방법을 제안하였다. 충돌 거동을 잘 일치시키기 위해서는 충돌 시너지를 주로 흡수하는 압괴 구간의 특성을 정확하게 모델링하는 것이 중요하다. KHST 편성차량을 대상으로 3차원 유한요소 모델의 차체단면에 설정한 단면 옵션으로 충돌해석 시 차체 단면에 작용하는 충격하중과 변형을 추출하여 새로운 1차원 충돌동역학 모델의 스프링요소 특성으로 모델링하고, 국내철도차량 안전기준의 열차 대 열차 충돌사고 각본으로 수치해석을 수행하였다. 두 모델의 에너지 흡수량, 충돌 가속도, 충격하중-변형 등을 비교한 결과가 잘 일치하였다.