• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.954-956
• /
• 2005

For transformer designers, eddy current loss calculation of steel structure is required to consider temperature rise on transformers. This study describes design of a lock plate for converter transformers by finite element method. The lock plate may be locally heated by fringing flux due to air-gap. 3D finite element analysis is performed and compared so as to minimize eddy loss on the lock plate with different materials and structures

• Ocean Systems Engineering
• /
• 제4권4호
• /
• pp.279-291
• /
• 2014

Smart flanges are used for pipeline and riser repair in subsea. In a typical case in the gas export pipeline project, the end cap bolts of a 4inch smart flange were broken during operation, and in turn leakage occurred. This work presents the detail of three dimensional finite element analysis of the smart flange to support the observed end cap bolts failure. From finite element analysis it turns out that in the presence of external bending moment, an uneven contact distribution is present between seal and end cap, which in turn changes the uniform load distribution on bolts and threaten the integrity of bolts. On the other hand, 3D finite element analysis of interaction between pipeline and seabed is presented by means of Abaqus to explore the distribution of bending moment along the pipeline route. It is found that lateral buckling occurs in the pipeline which introduces large bending moment.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.573-578
• /
• 2008

Finite element analysis of impact response of a motorcycle helmet is presented in this paper. The finite element LS-DYNA3D code is used to simulate the impact response of the helmet including of plastic shell, foam liner, and magnesium headform. Since the maximum accelerations at center of gravity of the headform obtained by numerical analysis and experiment agree well, the numerical simulation is proved to be valid.

• 한국방사선학회논문지
• /
• 제13권7호
• /
• pp.947-953
• /
• 2019

임상에서 사용하는 진단 검사 장치인 전산화 단층촬영기와 자동화된 설계 소프트웨어(MediACE 3D Prog ram), 3D 프린터로 손목 보조기를 제작하고자 하였다. 전산화단층촬영기로 상지의 Dicom 파일을 획득한 후 MediACE 3D Program을 통해 손목 보조기를 디자인하여 "STL(stereolithography)"파일을 만들었고, 디자인된 손목 보조기는 3D 프린터를 이용하여 인쇄하였다. 3D 프린팅 기술로 제작된 손목보조기의 효용성 검증을 위해 뼈와 피부에 가해지는 압력 및 보조기의 스트레스 분포를 유한요소해석으로 나타내었다. 손목 보조기를 제작할 때 유한요소해석의 결과를 가지고 뼈와 피부가 압력에 의한 손상과 보조기의 파손이 자주 일어나는 부위를 보강하여 손목 보조기를 제작할 수 있을 것이라고 기대된다.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.314-322
• /
• 2007

In general, the vibration and structural analyses have been carried out by using each finite element model separately because of different size of finite element mesh and different focusing area of each analysis. In some cases, however, it is required to perform both global vibration and structural analyses at the same time using a finite element model for global structural analysis, which asks for a special treatment for a vibration analysis. In this study, a technique to perform a global vibration analysis using a finite element model for a global structural analysis has been developed and its effectiveness has been verified by its application to a whole ship.

• 지구물리와물리탐사
• /
• 제7권4호
• /
• pp.234-244
• /
• 2004

주파수 영역 유한요소 파동방정식의 3차원 모델링은 거대한 크기의 산재행렬(sparse matrix)인 임피던스 행렬을 풀어야 한다. 이러한 이유 때문에 파동방정식의 3차원 모델링은 주로 시간 영역에서 이루어지고 있다. 이 연구는 주파수 영역 파동방정식의 유한요소 3차원 모델링 연구의 일환으로 라플라스 영역에서 1개 주파수에 대한 파동방정식 해를 이용하여 주시와 진폭을 계산할 수 있는 SWEET(Suppressed Wave Equation Estimation of Traveltime) 알고리즘과 병렬 유한요소 솔버를 결합하여 주파수 영역 3차원 모델링을 시도 하였다. 이렇게 계산된 주시와 진폭은 파선이론에 기반하여 계산된 주시와 진폭과 달리 급경사 구조 또는 수평 속도의 비가 큰 곳에서도 정확하게 계산되며, Kirchhoff 구조보정에 유용하게 사용될 수 있다. 연구의 결과를 검증하기 위하여 SEG/EAGE 3D 암염 모델의 주시와 진폭 계산에 적용하여 이를 검증하였다.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1325-1333
• /
• 2001

Critical defects in pressure vessels and pipes are generally found in the form of a semi-elliptical surface crack, and the analysis of which is consequently an important problem in engineering fracture mechanics. Furthermore, in addition to the traditional single parameter K or J-integral, the second parameter like T-stress should be measured to quantify the constraint effect. In this work, the validity of the line-spring finite element is investigated by comparing line-spring J-T solutions to the reference 3D finite element J-T solutions. A full 3D-mesh generating program for semi-elliptical surface cracks is employed to provide such reference 3D solutions. Then some structural characteristics of the surface-cracked T and L-joints are studied by mixed mode line-spring finite element. Negative T-stresses observed in T and L-joints indicate the necessity of J-T two parameter approach for analyses of surface-cracked T and L-joints.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.19-28
• /
• 1995

The explicit scheme for finite element analysis of sheet metal forming problems has been widely used for providing practical solutions since it improves the convergency problem, memory size and computational time especially for the case of complicated geometry and large element number. The explicit schemes in general use are based on the elastic-plastic modelling of material requiring large computation time. In the present work, rigid-plastic explicit finite element method is introduced for analysis of sheet metal forming processes in which plane strain normal anisotropy condition can be assumed by dividing the whole piece into sections. The explicit scheme is in good agreement with the implicit scheme for numerical analysis and experimental results of auto-body panels. The proposed rigid-plastic explicit finite element method can be used as robust and efficient computational method for prediction of defects and forming severity.

• Structural Engineering and Mechanics
• /
• 제40권2호
• /
• pp.257-277
• /
• 2011

In this paper the geometrically nonlinear continuum plate finite element model, hitherto not reported in the literature, is developed using the total Lagrange formulation. With the layerwise displacement field of Reddy, nonlinear Green-Lagrange small strain large displacements relations (in the von Karman sense) and linear elastic orthotropic material properties for each lamina, the 3D elasticity equations are reduced to 2D problem and the nonlinear equilibrium integral form is obtained. By performing the linearization on nonlinear integral form and then the discretization on linearized integral form, tangent stiffness matrix is obtained with less manipulation and in more consistent form, compared to the one obtained using laminated element approach. Symmetric tangent stiffness matrixes, together with internal force vector are then utilized in Newton Raphson's method for the numerical solution of nonlinear incremental finite element equilibrium equations. Despite of its complex layer dependent numerical nature, the present model has no shear locking problems, compared to ESL (Equivalent Single Layer) models, or aspect ratio problems, as the 3D finite element may have when analyzing thin plate behavior. The originally coded MATLAB computer program for the finite element solution is used to verify the accuracy of the numerical model, by calculating nonlinear response of plates with different mechanical properties, which are isotropic, orthotropic and anisotropic (cross ply and angle ply), different plate thickness, different boundary conditions and different load direction (unloading/loading). The obtained results are compared with available results from the literature and the linear solutions from the author's previous papers.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.167-173
• /
• 2005

The Berkovich nano-indentation is an indentation test method analyzing mechanical properties of materials such as hardness and elastic modulus. The length scale of the penetration is measured in nanometers. Therefore, this method becomes widely useful for analyzing the mechanical property of thin film which can not be measured before. In this paper, comparing two results of the load-displacement curve obtained by the Berkovich nano-indentation and the 3-D finite element analysis, it was confirmed that the 3-D finite element analysis is useful. The phenomenon of pile-up and sink-in due to material properties was discussed by the finite element analysis.